Watchguard x750e pfsense 2.3.4 not supported(SOLVED)
-
Hello 2 all!
Today my pfsense inform me that it have an updates!
I did it before, so i run update from 2.3.3_1 to 2.3.4…
It was i BIG mistake from my side..After update was complete, device going to reboot and thats all.
I connected to device with COM-serial port, and see next error when device is try to startWARNING: / was not properly dismounted WARNING: /: mount pending error: blocks 0 files 2No problem for me. I have a fresh backup so i downloaded new 2.3.4 install image and do clean installation.
After install was complete i run it on PC and system start correctly.
After that - i insert HDD to my device and try to boot but every time with error.
I try select different settings(ACPI=OFF, Singleuser, sisable dma, etc) but still have next error:/boot/kernel/kernel text=0x12493a0 data=0x851348+0x16c788 syms=[0x4+0xf7710+0x4+0x1701df] Booting... KDB: debugger backends: ddb KDB: current backend: ddb MP Configuration Table version 1.4 found at 0xc00f0c00 APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May 3 16:35:52 CDT 2017 root@ce23-i386-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense_wrap_vga i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 Preloaded elf kernel "/boot/kernel/kernel" at 0xc2271000. Calibrating TSC clock ... TSC clock: 1300071494 Hz CPU: Intel(R) Celeron(R) M processor 1300MHz (1300.07-MHz 686-class CPU) Origin="GenuineIntel" Id=0x695 Family=0x6 Model=0x9 Stepping=5 Features=0xa7e9fbbf <fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 512 KB, 4-way set associative, 64 byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size real memory = 2139029504 (2039 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000002428000 - 0x000000007d5a4fff, 2065158144 bytes (504189 pages) avail memory = 2064228352 (1968 MB) MPTable: <oem00000 prod00000000="">Event timer "LAPIC" quality 400 LAPIC: ipi_wait() us multiplier 36 (r 36000332 tsc 1300071494) bios32: Found BIOS32 Service Directory header at 0xc00f9920 bios32: Entry = 0xf9f30 (c00f9f30) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x9f60 pnpbios: Found PnP BIOS data at 0xc00faa50 pnpbios: Entry = f0000:aa80 Rev = 1.0 Other BIOS signatures found: XEN: CPU 0 has VCPU ID 4294967295 Hardware, Intel Secure Key RNG: RDRAND is not present Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present Falling back to <software, yarrow="">random adaptor random: <software, yarrow="">initialized ULE: setup cpu 0 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing ExtINT -> LINT0 lapic: Routing NMI -> LINT1 ioapic0 <version 2.0="">irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xc1c77fec firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xc1d920e0 firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xc1d94158 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xc1e28408 firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xc1d961d0 wlan: mac acl policy registered firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xc1d98248 firmware: 't4fw_cfg' version 0: 3215 bytes loaded at 0xc1670bec firmware: 't4fw_cfg_uwire' version 0: 21374 bytes loaded at 0xc167187b firmware: 't4fw' version 0: 539648 bytes loaded at 0xc1676bf9 firmware: 't5fw_cfg' version 0: 3591 bytes loaded at 0xc16fa874 firmware: 't5fw' version 0: 593920 bytes loaded at 0xc16fb67b wlan: <802.11 Link Layer> ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0817540, 0) error 1 firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xc1decd08 firmware: 'runfw' version 0: 8192 bytes loaded at 0xc1e0ad9c firmware: 'urtwn-rtl8188eufw' version 111: 13904 bytes loaded at 0xc1e0d374 firmware: 'urtwn-rtl8192cfwT' version 111: 16076 bytes loaded at 0xc1e10a3c firmware: 'urtwn-rtl8192cfwU' version 111: 16076 bytes loaded at 0xc1e14980 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc08175f0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc08176a0, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc083f090, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc083f140, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc083f1f0, 0) error 1 firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xc18af58c firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xc1901c74 firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xc19abb30 firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xc1a586e8 firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xc1a865a4 firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xc1ad98f4 firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xc1b2bf64 firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xc1cf1fd8 firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xc1d092b4 firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xc1d09cd4 firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xc1d27484 firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xc1d44ee4 firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xc1d6a0c8 firmware: 'iwn6000g2afw' version 0: 444128 bytes loaded at 0xc1b9afac firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at 0xc1c07704 null: <null device,="" zero="" device="">nfslock: pseudo-device crypto: <crypto core="">VESA: INT 0x10 vector 0xc000:0x0014 VESA: information block 0000 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 0010 00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01 0020 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0040 60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01 0050 68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01 0060 70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01 0070 07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01 0080 15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 49 6e 74 65 6c 28 72 29 39 31 35 47 4d 2f 39 31 0110 30 4d 4c 2f 39 31 35 4d 53 20 47 72 61 70 68 69 0120 63 73 20 43 68 69 70 20 41 63 63 65 6c 65 72 61 0130 74 65 64 20 56 47 41 20 42 49 4f 53 00 49 6e 74 0140 65 6c 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 49 0150 6e 74 65 6c 28 72 29 39 31 35 47 4d 2f 39 31 30 0160 4d 4c 2f 39 31 35 4d 53 20 47 72 61 70 68 69 63 0170 73 20 43 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72 0180 64 77 61 72 65 20 56 65 72 73 69 6f 6e 20 30 2e 0190 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 9 mode(s) found VESA: v3.0, 7872k memory, flags:0x1, mode table:0xe27ae040 (1000040) VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0 VMBUS: load io: _kbd: new array size 4 kbd1 at kbdmux0 mem: <memory>Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 hptnr: R750/DC7280 controller driver v1.1.4 hpt27xx: RocketRAID 27xx controller driver v1.2.7 cryptosoft0: <software crypto="">on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 padlock0: No ACE support. pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 3.00 PCIe: Memory Mapped configuration base @ 0xe0000000 pcib0: <mptable host-pci="" bridge="">pcibus 0 on motherboard pci0: <pci bus="">on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x04 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2592, revid=0x04 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0500000, size 19, enabled map[14]: type I/O Port, range 32, base 0xda00, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled map[1c]: type Memory, range 32, base 0xd0580000, size 18, enabled pcib0: slot 2 INTA routed to irq 16 found-> vendor=0x8086, dev=0x2660, revid=0x04 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTA routed to irq 16 secbus=1, subbus=1 found-> vendor=0x8086, dev=0x2662, revid=0x04 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=12 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTB routed to irq 17 secbus=2, subbus=2 found-> vendor=0x8086, dev=0x2664, revid=0x04 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTC routed to irq 18 secbus=3, subbus=3 found-> vendor=0x8086, dev=0x2666, revid=0x04 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: slot 28 INTD routed to irq 19 secbus=4, subbus=4 found-> vendor=0x8086, dev=0x2658, revid=0x04 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[20]: type I/O Port, range 32, base 0xdb00, size 5, enabled pcib0: slot 29 INTA routed to irq 23 found-> vendor=0x8086, dev=0x2659, revid=0x04 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0xdd00, size 5, enabled pcib0: slot 29 INTB routed to irq 19 found-> vendor=0x8086, dev=0x265a, revid=0x04 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: slot 29 INTC routed to irq 18 found-> vendor=0x8086, dev=0x265b, revid=0x04 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0xd900, size 5, enabled pcib0: slot 29 INTD routed to irq 16 found-> vendor=0x8086, dev=0x265c, revid=0x04 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd05c0000, size 10, enabled pcib0: slot 29 INTA routed to irq 23 found-> vendor=0x8086, dev=0x2448, revid=0xd4 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) secbus=5, subbus=5 found-> vendor=0x8086, dev=0x2641, revid=0x04 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266f, revid=0x04 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled found-> vendor=0x8086, dev=0x266a, revid=0x04 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x500, size 5, enabled pcib0: slot 31 INTB routed to irq 19 vgapci0: <vga-compatible display="">port 0xda00-0xda07 mem 0xd0500000-0xd057ffff,0xc0000000-0xcfffffff,0xd0580000-0xd05bffff irq 16 at device 2.0 on pci0 agp0: <intel 82915gm="" (915gm="" gmch)="" svga="" controller="">on vgapci0 agp0: Found already configured flush page at 0xfed13000 agp0: Allocated flush page phys 0xfed13000 virt 0xe27d9000 agp0: aperture size is 256M, detected 7932k stolen memory agp0: AGP_I810_PGTBL_CTL: 7ffc0001 agp0: AGP_I855_GCC1: 0x30 agp0: AGP_I915_MSAC: 0xd1 agp0: Mappable GTT entries: 65536 agp0: Total GTT entries: 65536 vgapci0: Boot video device pcib1: <mptable pci-pci="" bridge="">irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x7000-0x7fff pcib1: memory decode 0xd0000000-0xd00fffff pci1: <pci bus="">on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci1 pci1: domain=0, physical bus=1 found-> vendor=0x11ab, dev=0x4362, revid=0x19 domain=0, bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xd0020000, size 14, enabled pcib1: allocated memory range (0xd0020000-0xd0023fff) for rid 10 of pci0:1:0:0 map[18]: type I/O Port, range 32, base 0x7000, size 8, enabled pcib1: allocated I/O port range (0x7000-0x70ff) for rid 18 of pci0:1:0:0 pcib1: slot 0 INTA routed to irq 16 mskc0: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x7000-0x70ff mem 0xd0020000-0xd0023fff irq 16 at device 0.0 on pci1 mskc0: MSI count : 2 mskc0: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 48 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 48KB mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc0 msk0: Using defaults for TSO: 65518/35/2048 msk0: bpf attached msk0: Ethernet address: 00:90:7f:43:6d:fd miibus0: <mii bus="">on msk0 e1000phy0: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus0 e1000phy0: OUI 0x000ac2, model 0x000c, rev. 2 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib2: <mptable pci-pci="" bridge="">irq 17 at device 28.1 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x8000-0x8fff pcib2: memory decode 0xd0100000-0xd01fffff pci2: <pci bus="">on pcib2 pcib2: allocated bus range (2-2) for rid 0 of pci2 pci2: domain=0, physical bus=2 found-> vendor=0x11ab, dev=0x4362, revid=0x19 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xd0120000, size 14, enabled pcib2: allocated memory range (0xd0120000-0xd0123fff) for rid 10 of pci0:2:0:0 map[18]: type I/O Port, range 32, base 0x8000, size 8, enabled pcib2: allocated I/O port range (0x8000-0x80ff) for rid 18 of pci0:2:0:0 pcib2: slot 0 INTA routed to irq 17 mskc1: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x8000-0x80ff mem 0xd0120000-0xd0123fff irq 17 at device 0.0 on pci2 mskc1: MSI count : 2 mskc1: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 49 mskc1: using IRQ 257 for MSI mskc1: RAM buffer size : 48KB mskc1: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) mskc1: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) msk1: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc1 msk1: Using defaults for TSO: 65518/35/2048 msk1: bpf attached msk1: Ethernet address: 00:90:7f:43:6d:fc miibus1: <mii bus="">on msk1 e1000phy1: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus1 e1000phy1: OUI 0x000ac2, model 0x000c, rev. 2 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib3: <mptable pci-pci="" bridge="">irq 18 at device 28.2 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x9000-0x9fff pcib3: memory decode 0xd0200000-0xd02fffff pci3: <pci bus="">on pcib3 pcib3: allocated bus range (3-3) for rid 0 of pci3 pci3: domain=0, physical bus=3 found-> vendor=0x11ab, dev=0x4362, revid=0x19 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xd0220000, size 14, enabled pcib3: allocated memory range (0xd0220000-0xd0223fff) for rid 10 of pci0:3:0:0 map[18]: type I/O Port, range 32, base 0x9000, size 8, enabled pcib3: allocated I/O port range (0x9000-0x90ff) for rid 18 of pci0:3:0:0 pcib3: slot 0 INTA routed to irq 18 mskc2: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x9000-0x90ff mem 0xd0220000-0xd0223fff irq 18 at device 0.0 on pci3 mskc2: MSI count : 2 mskc2: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 258 to local APIC 0 vector 50 mskc2: using IRQ 258 for MSI mskc2: RAM buffer size : 48KB mskc2: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) mskc2: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) msk2: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc2 msk2: Using defaults for TSO: 65518/35/2048 msk2: bpf attached msk2: Ethernet address: 00:90:7f:43:6d:fb miibus2: <mii bus="">on msk2 e1000phy2: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus2 e1000phy2: OUI 0x000ac2, model 0x000c, rev. 2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib4: <mptable pci-pci="" bridge="">irq 19 at device 28.3 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xa000-0xafff pcib4: memory decode 0xd0300000-0xd03fffff pci4: <pci bus="">on pcib4 pcib4: allocated bus range (4-4) for rid 0 of pci4 pci4: domain=0, physical bus=4 found-> vendor=0x11ab, dev=0x4362, revid=0x19 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xd0320000, size 14, enabled pcib4: allocated memory range (0xd0320000-0xd0323fff) for rid 10 of pci0:4:0:0 map[18]: type I/O Port, range 32, base 0xa000, size 8, enabled pcib4: allocated I/O port range (0xa000-0xa0ff) for rid 18 of pci0:4:0:0 pcib4: slot 0 INTA routed to irq 19 mskc3: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xa000-0xa0ff mem 0xd0320000-0xd0323fff irq 19 at device 0.0 on pci4 mskc3: MSI count : 2 mskc3: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 259 to local APIC 0 vector 51 mskc3: using IRQ 259 for MSI mskc3: RAM buffer size : 48KB mskc3: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) mskc3: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) msk3: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc3 msk3: Using defaults for TSO: 65518/35/2048 msk3: bpf attached msk3: Ethernet address: 00:90:7f:43:6d:fa miibus3: <mii bus="">on msk3 e1000phy3: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus3 e1000phy3: OUI 0x000ac2, model 0x000c, rev. 2 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a="">port 0xdb00-0xdb1f irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52 usbus0 on uhci0 uhci0: usbpf: Attached uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b="">port 0xdd00-0xdd1f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 usbus1 on uhci1 uhci1: usbpf: Attached uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c="">port 0xd800-0xd81f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 usbus2 on uhci2 uhci2: usbpf: Attached uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d="">port 0xd900-0xd91f irq 16 at device 29.3 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 55 usbus3 on uhci3 uhci3: usbpf: Attached ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller="">mem 0xd05c0000-0xd05c03ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 ehci0: usbpf: Attached pcib5: <mptable pci-pci="" bridge="">at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xb000-0xcfff pcib5: memory decode 0xd0400000-0xd04fffff pcib5: special decode subtractive pci5: <pci bus="">on pcib5 pcib5: allocated bus range (5-5) for rid 0 of pci5 pci5: domain=0, physical bus=5 found-> vendor=0x11ab, dev=0x4320, revid=0x13 domain=0, bus=5, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd042c000, size 14, enabled pcib5: allocated memory range (0xd042c000-0xd042ffff) for rid 10 of pci0:5:0:0 map[14]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib5: allocated I/O port range (0xb000-0xb0ff) for rid 14 of pci0:5:0:0 pcib5: slot 0 INTA routed to irq 16 found-> vendor=0x11ab, dev=0x4320, revid=0x13 domain=0, bus=5, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0420000, size 14, enabled pcib5: allocated memory range (0xd0420000-0xd0423fff) for rid 10 of pci0:5:1:0 map[14]: type I/O Port, range 32, base 0xb400, size 8, enabled pcib5: allocated I/O port range (0xb400-0xb4ff) for rid 14 of pci0:5:1:0 pcib5: slot 1 INTA routed to irq 17 found-> vendor=0x11ab, dev=0x4320, revid=0x13 domain=0, bus=5, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0424000, size 14, enabled pcib5: allocated memory range (0xd0424000-0xd0427fff) for rid 10 of pci0:5:2:0 map[14]: type I/O Port, range 32, base 0xb800, size 8, enabled pcib5: allocated I/O port range (0xb800-0xb8ff) for rid 14 of pci0:5:2:0 pcib5: slot 2 INTA routed to irq 18 found-> vendor=0x11ab, dev=0x4320, revid=0x13 domain=0, bus=5, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0428000, size 14, enabled pcib5: allocated memory range (0xd0428000-0xd042bfff) for rid 10 of pci0:5:3:0 map[14]: type I/O Port, range 32, base 0xbc00, size 8, enabled pcib5: allocated I/O port range (0xbc00-0xbcff) for rid 14 of pci0:5:3:0 pcib5: slot 3 INTA routed to irq 19 found-> vendor=0x177d, dev=0x0003, revid=0x00 domain=0, bus=5, slot=4, func=0 class=10-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xc000, size 8, enabled pcib5: allocated I/O port range (0xc000-0xc0ff) for rid 10 of pci0:5:4:0 map[18]: type I/O Port, range 32, base 0xc400, size 8, enabled pcib5: allocated I/O port range (0xc400-0xc4ff) for rid 18 of pci0:5:4:0 pcib5: slot 4 INTA routed to irq 20 skc0: <marvell gigabit="" ethernet="">port 0xb000-0xb0ff mem 0xd042c000-0xd042ffff irq 16 at device 0.0 on pci5 skc0: interrupt moderation is 100 us skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc0: chip ver = 0xb1 skc0: chip rev = 0x09 skc0: SK_EPROM0 = 0x10 skc0: SRAM size = 0x010000 sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0 sk0: bpf attached sk0: Ethernet address: 00:90:7f:43:6d:f9 miibus4: <mii bus="">on sk0 e1000phy4: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus4 e1000phy4: OUI 0x000ac2, model 0x0002, rev. 5 e1000phy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc1: <marvell gigabit="" ethernet="">port 0xb400-0xb4ff mem 0xd0420000-0xd0423fff irq 17 at device 1.0 on pci5 skc1: interrupt moderation is 100 us skc1: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc1: chip ver = 0xb1 skc1: chip rev = 0x09 skc1: SK_EPROM0 = 0x10 skc1: SRAM size = 0x010000 sk1: <marvell semiconductor,="" inc.="" yukon="">on skc1 sk1: bpf attached sk1: Ethernet address: 00:90:7f:43:6d:f8 miibus5: <mii bus="">on sk1 e1000phy5: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus5 e1000phy5: OUI 0x000ac2, model 0x0002, rev. 5 e1000phy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 56 skc2: <marvell gigabit="" ethernet="">port 0xb800-0xb8ff mem 0xd0424000-0xd0427fff irq 18 at device 2.0 on pci5 skc2: interrupt moderation is 100 us skc2: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc2: chip ver = 0xb1 skc2: chip rev = 0x09 skc2: SK_EPROM0 = 0x10 skc2: SRAM size = 0x010000 sk2: <marvell semiconductor,="" inc.="" yukon="">on skc2 sk2: bpf attached sk2: Ethernet address: 00:90:7f:43:6d:f7 miibus6: <mii bus="">on sk2 e1000phy6: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus6 e1000phy6: OUI 0x000ac2, model 0x0002, rev. 5 e1000phy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc3: <marvell gigabit="" ethernet="">port 0xbc00-0xbcff mem 0xd0428000-0xd042bfff irq 19 at device 3.0 on pci5 skc3: interrupt moderation is 100 us skc3: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc3: chip ver = 0xb1 skc3: chip rev = 0x09 skc3: SK_EPROM0 = 0x10 skc3: SRAM size = 0x010000 sk3: <marvell semiconductor,="" inc.="" yukon="">on skc3 sk3: bpf attached sk3: Ethernet address: 00:90:7f:43:6d:f6 miibus7: <mii bus="">on sk3 e1000phy7: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus7 e1000phy7: OUI 0x000ac2, model 0x0002, rev. 5 e1000phy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto pci5: <encrypt decrypt,="" network="" computer="" crypto="">at device 4.0 (no driver attached) isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich6="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ata channel="">at channel 0 on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57 ata1: <ata channel="">at channel 1 on atapci0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 58 pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached) cpu0 on motherboard ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 14 devices, largest 92 bytes PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x83, size=0x3, align=0 PNP0200: adding io range 0x87-0x87, size=0x1, align=0 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 4 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 6 device ID PNP0c04 (040cd041) INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000 pnpbios: handle 7 device ID INT0800 (0008d425) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000 PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000 pnpbios: handle 8 device ID PNP0c01 (010cd041) PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xce800-0xcffff, size=0x1800 pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0x294-0x297, size=0x4, align=0 PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: adding io range 0x400-0x4bf, size=0xc0, align=0 pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 PNP0400: adding io range 0x778-0x77b, size=0x4, align=0 pnpbios: handle 13 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 15 device ID PNP0501 (0105d041) isa_probe_children: disabling PnP devices pmtimer0 on isa0 attimer0: <at timer="">at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 59 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <at realtime="" clock="">at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 60 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ (null) failed to probe at port 0x61 pnpid PNP0800 on isa0 (null) failed to probe at iomem 0xffb80000-0xffbfffff pnpid INT0800 on isa0 unknown: <pnp0c01>can't assign resources (memory) unknown: <pnp0c01>at iomem 0-0x9ffff pnpid PNP0c01 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 uart0: console (115200,n,8,1) ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 62 uart0: fast interrupt uart0: PPS capture mode: DCDinvalid ppc0: using extended I/O port range ppc0: SPP ppc0: <standard parallel="" printer="" port="">at port 0x378-0x37f,0x778-0x77b irq 7 pnpid PNP0400 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 63 ppbus0: <parallel port="" bus="">on ppc0 lpt0: <printer>on ppbus0 lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 64 uart1: fast interrupt uart1: PPS capture mode: DCDinvalid ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <isa option="" rom="">at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices unknown: <pnp0c01>can't assign resources (memory) unknown: <pnp0c01>at iomem 0-0x9ffff pnpid PNP0c01 on isa0 Device configuration finished. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 procfs registered lapic: Divisor 2, Frequency 50002830 Hz Timecounters tick every 1.000 msec pflog0: bpf attached crypto: <crypto device="">vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384 IPsec: Initialized Security Association Processing. pfsync0: bpf attached lo0: bpf attached enc0: bpf attached hptrr: no controller detected. hptnr: no controller detected. hpt27xx: no controller detected. usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 ugen0.1: <intel>at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <intel>at usbus3 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3 usbus4: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ugen4.1: <intel>at usbus4 uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered pass0 at ata0 bus 0 scbus0 target 0 lun 0 pass0: <st1000lm024 hn-m101mbb="" 2ar20002="">ATA8-ACS SATA 2.x device pass0: Serial Number S2SMJ9CDB13852 pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <st1000lm024 hn-m101mbb="" 2ar20002="">ATA8-ACS SATA 2.x device ada0: Serial Number S2SMJ9CDB13852 ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 953869MB (1953525168 512 byte sectors) ada0: Previously was known as ad0 GEOM: new disk ada0 Timecounter "TSC" frequency 1300071494 Hz quality 800 GEOM_PART: partition 1 on (ada0, MBR) is not aligned on 4096 bytes GEOM_PART: partition 1 on (ada0s1, BSD) is not aligned on 4096 bytes GEOM_PART: partition 2 on (ada0s1, BSD) is not aligned on 4096 bytes GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852, MBR) is not aligned on 4096 bytes GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes GEOM_PART: partition 2 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes Trying to mount root from ufs:/dev/ufsid/59100aebef9b520c [rw]... WARNING: / was not properly dismounted start_init: trying /sbin/init GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852, MBR) is not aligned on 4096 bytes GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes GEOM_PART: partition 2 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes mode = 0100666, inum = 8507143, fs = / panic: ffs_valloc: dup alloc cpuid = 0 KDB: enter: panic [ thread pid 312 tid 100088 ] Stopped at kdb_enter+0x3d: movl $0,kdb_why db:0:kdb.enter.default> textdump set textdump set db:0:kdb.enter.default> capture on db:0:kdb.enter.default> run lockinfo db:1:lockinfo> show locks No such command db:1:locks> show alllocks No such command db:1:alllocks> show lockedvnods Locked vnodes 0xc801911c: tag ufs, type VDIR usecount 1, writecount 0, refcount 3 mountedhere 0 flags (VI_ACTIVE) v_object 0xc7dff6b4 ref 0 pages 1 cleanbuf 0 dirtybuf 1 lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088) ino 8507136, on dev ufsid/59100aebef9b520c 0xc806a354: tag ufs, type VREG usecount 1, writecount 0, refcount 1 mountedhere 0 flags (VI_ACTIVE) lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088) ino 8507143, on dev ufsid/59100aebef9b520c db:0:kdb.enter.default> show pcpu cpuid = 0 dynamic pcpu = 0x58c700 curthread = 0xc7de4320: pid 312 "php-fpm" curpcb = 0xeba8cd40 fpcurthread = 0xc7de4320: pid 312 "php-fpm" idlethread = 0xc7713000: tid 100003 "idle: cpu0" APIC ID = 0 currentldt = 0x50 db:0:kdb.enter.default> bt Tracing pid 312 tid 100088 td 0xc7de4320 kdb_enter(c145f716,c145f716,c1492c3b,eba8c7b4,0,...) at kdb_enter+0x3d/frame 0xeba8c760 vpanic(c1492c3b,eba8c7b4,eba8c7b4,eba8c830,c0fe6ef1,...) at vpanic+0x13b/frame 0xeba8c794 panic(c1492c3b,81b6,81cf07,c7dc80d4,81a4,...) at panic+0x1b/frame 0xeba8c7a8 ffs_valloc(c801911c,81a4,c7dc1e80,eba8c874,0,...) at ffs_valloc+0x961/frame 0xeba8c830 ufs_makeinode(eba8cb88,eba8cb9c,c801911c,eba8cb40,eba8ca00,...) at ufs_makeinode+0x73/frame 0xeba8c9b0 ufs_create(eba8caa8,0,0,c1e982b0,c801911c,...) at ufs_create+0x30/frame 0xeba8c9d4 VOP_CREATE_APV(c1e82d80,eba8caa8,2,c79d89fc,1c,...) at VOP_CREATE_APV+0x95/frame 0xeba8ca00 vn_open_cred(eba8cb40,eba8cbcc,1a4,0,c7dc1e80,c7deb428) at vn_open_cred+0x2ae/frame 0xeba8cad0 vn_open(eba8cb40,eba8cbcc,1a4,c7deb428,28c35e04,...) at vn_open+0x3d/frame 0xeba8caf8 kern_openat(c7de4320,ffffff9c,28c35e04,0,601,1b6) at kern_openat+0x310/frame 0xeba8cbf0 sys_openat(c7de4320,eba8cca8,c8038308,c1f67580,18,...) at sys_openat+0x3a/frame 0xeba8cc18 syscall(eba8cce8) at syscall+0x5c9/frame 0xeba8ccdc Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba8ccdc --- syscall (499, FreeBSD ELF32, sys_openat), eip = 0x28730093, esp = 0xbfbfa370, ebp = 0xbfbfa394 --- db:0:kdb.enter.default> ps pid ppid pgrp uid state wmesg wchan cmd 313 21 21 0 S+ sbwait 0xc806e408 fcgicli 312 311 311 0 R CPU 0 php-fpm 311 1 311 0 Ss kqread 0xc802f900 php-fpm 55 0 0 0 DL mdwait 0xc7d82800 [md0] 21 1 21 0 Ss+ pause 0xc7d9597c sh 20 0 0 0 DL vlruwt 0xc7d95c20 [vnlru] 19 0 0 0 DL syncer 0xc1f7a6c4 [syncer] 18 0 0 0 RL (threaded) [bufdaemon] 100082 RunQ [/ worker] 100075 D psleep 0xc1f79e04 [bufdaemon] 17 0 0 0 DL pgzero 0xc1f848a8 [pagezero] 9 0 0 0 DL pollid 0xc1f59eb0 [idlepoll] 8 0 0 0 DL psleep 0xc1f845c4 [vmdaemon] 7 0 0 0 DL (threaded) [pagedaemon] 100078 D umarcl 0xc1f841a4 [uma] 100071 D psleep 0xc1fe5504 [pagedaemon] 6 0 0 0 DL waiting_ 0xc1fdfe74 [sctp_iterator] 5 0 0 0 DL pftm 0xc0f7b2b0 [pf purge] 16 0 0 0 DL (threaded) [usb] 100057 D - 0xc7923d64 [usbus4] 100056 D - 0xc7923d34 [usbus4] 100055 D - 0xc7923d04 [usbus4] 100054 D - 0xc7923cd4 [usbus4] 100053 D - 0xc7923ca4 [usbus4] 100052 D - 0xc790dddc [usbus3] 100051 D - 0xc790ddac [usbus3] 100050 D - 0xc790dd7c [usbus3] 100049 D - 0xc790dd4c [usbus3] 100048 D - 0xc790dd1c [usbus3] 100046 D - 0xc78f4ddc [usbus2] 100045 D - 0xc78f4dac [usbus2] 100044 D - 0xc78f4d7c [usbus2] 100043 D - 0xc78f4d4c [usbus2] 100042 D - 0xc78f4d1c [usbus2] 100040 D - 0xc78d4ddc [usbus1] 100039 D - 0xc78d4dac [usbus1] 100038 D - 0xc78d4d7c [usbus1] 100037 D - 0xc78d4d4c [usbus1] 100036 D - 0xc78d4d1c [usbus1] 100034 D - 0xc7853ddc [usbus0] 100033 D - 0xc7853dac [usbus0] 100032 D - 0xc7853d7c [usbus0] 100031 D - 0xc7853d4c [usbus0] 100030 D - 0xc7853d1c [usbus0] 4 0 0 0 DL (threaded) [cam] 100070 D - 0xc1e9b7ac [scanner] 100016 D - 0xc1e9b900 [doneq0] 15 0 0 0 RL [rand_harvestq] 3 0 0 0 DL crypto_r 0xc1f83528 [crypto returns] 2 0 0 0 DL crypto_w 0xc1f83468 [crypto] 14 0 0 0 DL (threaded) [geom] 100010 D - 0xc1fdaf30 [g_down] 100009 D - 0xc1fdaf2c [g_up] 100008 D - 0xc1fdaf28 [g_event] 13 0 0 0 DL sleep 0xc1e72e74 [ng_queue0] 12 0 0 0 WL (threaded) [intr] 100068</st1000lm024></st1000lm024></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></crypto></pnp0c01></pnp0c01></generic></system></isa></parallel></printer></parallel></standard></pnp0c01></pnp0c01></at></keyboard></at></at></serial></ata></ata></intel></isa></pci-isa></encrypt></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></pci></mptable></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></intel></vga-compatible></pci></mptable></software></memory>_</crypto></null></version></software,></software,></oem00000></fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe> ```_&_ -
As i read on
https://doc.pfsense.org/index.php/2.4_New_Features_and_Changes
32-bit support has been deprecated and removed – There are no images available for 32-bit (x86/i386) Intel architecture systems
Yes, my device is x86 arch only. So, as i understand it was my mistake…
The last release for x86 hardware is 2.3.3_1 isn't it?For future(2)developers:
If my device doesn't support new version of pfsense - please disable a new versions in dashboard and check compatibility before start the update/installation.
Thanks -
2.3.4 is different to 2.4
2.3.4 should run on all the same hardware as 2.3.3_p1
So there is some other problem that you have.
-
Hmmm..
that is last part of my log
mode = 0100666, inum = 8507143, fs = / panic: ffs_valloc: dup alloc cpuid = 0 KDB: enter: panic [ thread pid 312 tid 100088 ] Stopped at kdb_enter+0x3d: movl $0,kdb_why db:0:kdb.enter.default> textdump set textdump set db:0:kdb.enter.default> capture on db:0:kdb.enter.default> run lockinfo db:1:lockinfo> show locks No such command db:1:locks> show alllocks No such command db:1:alllocks> show lockedvnods Locked vnodes 0xc801911c: tag ufs, type VDIR usecount 1, writecount 0, refcount 3 mountedhere 0 flags (VI_ACTIVE) v_object 0xc7dff6b4 ref 0 pages 1 cleanbuf 0 dirtybuf 1 lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088) ino 8507136, on dev ufsid/59100aebef9b520c 0xc806a354: tag ufs, type VREG usecount 1, writecount 0, refcount 1 mountedhere 0 flags (VI_ACTIVE) lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088) ino 8507143, on dev ufsid/59100aebef9b520c db:0:kdb.enter.default> show pcpu cpuid = 0 dynamic pcpu = 0x58c700 curthread = 0xc7de4320: pid 312 "php-fpm" curpcb = 0xeba8cd40 fpcurthread = 0xc7de4320: pid 312 "php-fpm" idlethread = 0xc7713000: tid 100003 "idle: cpu0" APIC ID = 0 currentldt = 0x50 db:0:kdb.enter.default> bt Tracing pid 312 tid 100088 td 0xc7de4320 kdb_enter(c145f716,c145f716,c1492c3b,eba8c7b4,0,...) at kdb_enter+0x3d/frame 0xeba8c760 vpanic(c1492c3b,eba8c7b4,eba8c7b4,eba8c830,c0fe6ef1,...) at vpanic+0x13b/frame 0xeba8c794 panic(c1492c3b,81b6,81cf07,c7dc80d4,81a4,...) at panic+0x1b/frame 0xeba8c7a8 ffs_valloc(c801911c,81a4,c7dc1e80,eba8c874,0,...) at ffs_valloc+0x961/frame 0xeba8c830 ufs_makeinode(eba8cb88,eba8cb9c,c801911c,eba8cb40,eba8ca00,...) at ufs_makeinode+0x73/frame 0xeba8c9b0 ufs_create(eba8caa8,0,0,c1e982b0,c801911c,...) at ufs_create+0x30/frame 0xeba8c9d4 VOP_CREATE_APV(c1e82d80,eba8caa8,2,c79d89fc,1c,...) at VOP_CREATE_APV+0x95/frame 0xeba8ca00 vn_open_cred(eba8cb40,eba8cbcc,1a4,0,c7dc1e80,c7deb428) at vn_open_cred+0x2ae/frame 0xeba8cad0 vn_open(eba8cb40,eba8cbcc,1a4,c7deb428,28c35e04,...) at vn_open+0x3d/frame 0xeba8caf8 kern_openat(c7de4320,ffffff9c,28c35e04,0,601,1b6) at kern_openat+0x310/frame 0xeba8cbf0 sys_openat(c7de4320,eba8cca8,c8038308,c1f67580,18,...) at sys_openat+0x3a/frame 0xeba8cc18 syscall(eba8cce8) at syscall+0x5c9/frame 0xeba8ccdc Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba8ccdc --- syscall (499, FreeBSD ELF32, sys_openat), eip = 0x28730093, esp = 0xbfbfa370, ebp = 0xbfbfa394 --- db:0:kdb.enter.default> ps pid ppid pgrp uid state wmesg wchan cmd 313 21 21 0 S+ sbwait 0xc806e408 fcgicli 312 311 311 0 R CPU 0 php-fpm 311 1 311 0 Ss kqread 0xc802f900 php-fpm 55 0 0 0 DL mdwait 0xc7d82800 [md0] 21 1 21 0 Ss+ pause 0xc7d9597c sh 20 0 0 0 DL vlruwt 0xc7d95c20 [vnlru] 19 0 0 0 DL syncer 0xc1f7a6c4 [syncer] 18 0 0 0 RL (threaded) [bufdaemon] 100082 RunQ [/ worker] 100075 D psleep 0xc1f79e04 [bufdaemon] 17 0 0 0 DL pgzero 0xc1f848a8 [pagezero] 9 0 0 0 DL pollid 0xc1f59eb0 [idlepoll] 8 0 0 0 DL psleep 0xc1f845c4 [vmdaemon] 7 0 0 0 DL (threaded) [pagedaemon] 100078 D umarcl 0xc1f841a4 [uma] 100071 D psleep 0xc1fe5504 [pagedaemon] 6 0 0 0 DL waiting_ 0xc1fdfe74 [sctp_iterator] 5 0 0 0 DL pftm 0xc0f7b2b0 [pf purge] 16 0 0 0 DL (threaded) [usb] 100057 D - 0xc7923d64 [usbus4] 100056 D - 0xc7923d34 [usbus4] 100055 D - 0xc7923d04 [usbus4] 100054 D - 0xc7923cd4 [usbus4] 100053 D - 0xc7923ca4 [usbus4] 100052 D - 0xc790dddc [usbus3] 100051 D - 0xc790ddac [usbus3] 100050 D - 0xc790dd7c [usbus3] 100049 D - 0xc790dd4c [usbus3] 100048 D - 0xc790dd1c [usbus3] 100046 D - 0xc78f4ddc [usbus2] 100045 D - 0xc78f4dac [usbus2] 100044 D - 0xc78f4d7c [usbus2] 100043 D - 0xc78f4d4c [usbus2] 100042 D - 0xc78f4d1c [usbus2] 100040 D - 0xc78d4ddc [usbus1] 100039 D - 0xc78d4dac [usbus1] 100038 D - 0xc78d4d7c [usbus1] 100037 D - 0xc78d4d4c [usbus1] 100036 D - 0xc78d4d1c [usbus1] 100034 D - 0xc7853ddc [usbus0] 100033 D - 0xc7853dac [usbus0] 100032 D - 0xc7853d7c [usbus0] 100031 D - 0xc7853d4c [usbus0] 100030 D - 0xc7853d1c [usbus0] 4 0 0 0 DL (threaded) [cam] 100070 D - 0xc1e9b7ac [scanner] 100016 D - 0xc1e9b900 [doneq0] 15 0 0 0 RL [rand_harvestq] 3 0 0 0 DL crypto_r 0xc1f83528 [crypto returns] 2 0 0 0 DL crypto_w 0xc1f83468 [crypto] 14 0 0 0 DL (threaded) [geom] 100010 D - 0xc1fdaf30 [g_down] 100009 D - 0xc1fdaf2c [g_up] 100008 D - 0xc1fdaf28 [g_event] 13 0 0 0 DL sleep 0xc1e72e74 [ng_queue0] 12 0 0 0 WL (threaded) [intr] 100068 I [swi1: pfsync] 100066 I [swi1: pf send] 100063 I [irq7: ppc0] 100062 I [swi0: uart uart] 100061 I [irq1: atkbd0] 100060 I [irq15: ata1] 100059 I [irq14: ata0] 100058 I [irq17: skc1] 100047 I [irq16: skc0 uhci3] 100041 I [irq18: skc2 uhci2] 100035 I [irq19: skc3 uhci1] 100029 I [irq23: uhci0 ehci0] 100028 I [irq259: mskc3] 100027 I [irq258: mskc2] 100026 I [irq257: mskc1] 100025 I [irq256: mskc0] 100023 I [swi6: Giant taskq] 100021 I [swi6: task queue] 100015 I [swi5: fast taskq] 100006 I [swi4: clock] 100005 I [swi1: netisr 0] 100004 I [swi3: vm] 11 0 0 0 RL [idle: cpu0] 1 0 1 0 SLs wait 0xc770c308 [init] 10 0 0 0 DL audit_wo 0xc1fe3ddc [audit] 0 0 0 0 DLs (threaded) [kernel] 100069 D - 0xc770e280 [CAM taskq] 100064 D - 0xc796e580 [mca taskq] 100024 D - 0xc75c5b00 [thread] 100022 D - 0xc75c5c80 [ffs_trim taskq] 100020 D - 0xc75c5e00 [acpi_task_2] 100019 D - 0xc75c5e00 [acpi_task_1] 100018 D - 0xc75c5e00 [acpi_task_0] 100017 D - 0xc770e000 [kqueue taskq] 100011 D - 0xc770f700 [firmware taskq] 100000 D swapin 0xc1fdafb4 [swapper] db:0:kdb.enter.default> alltrace Tracing command fcgicli pid 313 tid 100083 td 0xc7de5320 sched_switch(c7de5320,0,104,ac,98,...) at sched_switch+0x2d2/frame 0xeba7a970 mi_switch(104,0,eba7aa20,c0cda762,c1f67580,c7de5320) at mi_switch+0x122/frame 0xeba7a9a8 sleepq_switch(c7de5320,0,c1463cfa,1a8,0,...) at sleepq_switch+0x15b/frame 0xeba7a9d0 sleepq_catch_signals(0,c1463cfa,154,1,c7de5320,...) at sleepq_catch_signals+0x5be/frame 0xeba7aa24 sleepq_wait_sig(c806e408,68,c14679a7,100,0,...) at sleepq_wait_sig+0x14/frame 0xeba7aa50 _sleep(c806e408,c806e3c8,168,c14679a7,0,0,0,0,0) at _sleep+0x29b/frame 0xeba7aa98 sbwait(c806e3a4,1,0,0,78,...) at sbwait+0x71/frame 0xeba7aacc soreceive_generic(c806e350,eba7ab80,eba7ab88,0,0,...) at soreceive_generic+0x273/frame 0xeba7ab38 kern_recvit(c7de5320,3,eba7abe8,0,0,...) at kern_recvit+0x1ea/frame 0xeba7abc0 sys_recvfrom(c7de5320,eba7aca8,c7d95000,c7de5320,c7de4320,...) at sys_recvfrom+0xa5/frame 0xeba7ac18 syscall(eba7ace8) at syscall+0x5c9/frame 0xeba7acdc Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba7acdc --- syscall (29, FreeBSD ELF32, sys_recvfrom), eip = 0x281407cb, esp = 0xbfbfe694, ebp = 0xbfbfe6b4 --- Tracing command php-fpm pid 312 tid 100088 td 0xc7de4320 kdb_enter(c145f716,c145f716,c1492c3b,eba8c7b4,0,...) at kdb_enter+0x3d/frame 0xeba8c760 vpanic(c1492c3b,eba8c7b4,eba8c7b4,eba8c830,c0fe6ef1,...) at vpanic+0x13b/frame 0xeba8c794 panic(c1492c3b,81b6,81cf07,c7dc80d4,81a4,...) at panic+0x1b/frame 0xeba8c7a8 ffs_valloc(c801911c,81a4,c7dc1e80,eba8c874,0,...) at ffs_valloc+0x961/frame 0xeba8c830 ufs_makeinode(eba8cb88,eba8cb9c,c801911c,eba8cb40,eba8ca00,...) at ufs_makeinode+0x73/frame 0xeba8c9b0 ufs_create(eba8caa8,0,0,c1e982b0,c801911c,...) at ufs_create+0x30/frame 0xeba8c9d4 VOP_CREATE_APV(c1e82d80,eba8caa8,2,c79d89fc,1c,...) at VOP_CREATE_APV+0x95/frame 0xeba8ca00 vn_open_cred(eba8cb40,eba8cbcc,1a4,0,c7dc1e80,c7deb428) at vn_open_cred+0x2ae/frame 0xeba8cad0 vn_open(eba8cb40,eba8cbcc,1a4,c7deb428,28c35e04,...) at vn_open+0x3d/frame 0xeba8caf8 kern_openat(c7de4320,ffffff9c,28c35e04,0,601,1b6) at kern_openat+0x310/frame 0xeba8cbf0 sys_openat(c7de4320,eba8cca8,c8038308,c1f67580,18,...) at sys_openat+0x3a/frame 0xeba8cc18 syscall(eba8cce8) at syscall+0x5c9/frame 0xeba8ccdc Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba8ccdc --- syscall (499, FreeBSD ELF32, sys_openat), eip = 0x28730093, esp = 0xbfbfa370, ebp = 0xbfbfa394 --- Tracing command php-fpm pid 311 tid 100091 td 0xc7d05960 sched_switch(c7d05960,0,104,1,e101e1b8,...) at sched_switch+0x2d2/frame 0xeba958e4 mi_switch(104,0,19,10000000,0,c7d05960) at mi_switch+0x122/frame 0xeba9591c sleepq_switch(c7d05960,0,c1463cfa,1a8,0,...) at sleepq_switch+0x15b/frame 0xeba95944 sleepq_catch_signals(10000000,0,c0d45bc0,c7d05960,0,...) at sleepq_catch_signals+0x5be/frame 0xeba95998 sleepq_timedwait_sig(c802f900,68,19,10000000,0,...) at sleepq_timedwait_sig+0x14/frame 0xeba959c8 _sleep(c802f900,c802f900,168,c1459e00,35667824,...) at _sleep+0x26b/frame 0xeba95a10 kern_kevent_fp(c7d05960,c7deb658,0,1,eba95be8,...) at kern_kevent_fp+0x3bc/frame 0xeba95b48 kern_kevent(c7d05960,e,0,1,eba95be8,...) at kern_kevent+0xdf/frame 0xeba95b98 sys_kevent(c7d05960,eba95ca8,c8037918,c7d05960,c7de5320,...) at sys_kevent+0x131/frame 0xeba95c18 syscall(eba95ce8) at syscall+0x5c9/frame 0xeba95cdc Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba95cdc --- syscall (363, FreeBSD ELF32, sys_kevent), eip = 0x2873a7db, esp = 0xbfbfca6c, ebp = 0xbfbfca98 --- Tracing command md0 pid 55 tid 100085 td 0xc7de4c80 sched_switch(c7de4c80,0,104,eba82bb0,0,...) at sched_switch+0x2d2/frame 0xeba82b88 mi_switch(104,0,e258bf40,c7d86280,c7de4c80,c7d82800) at mi_switch+0x122/frame 0xeba82bc0 sleepq_switch(c7de4c80,0,c1463cfa,269,c7dc1758,...) at sleepq_switch+0x15b/frame 0xeba82be8 sleepq_wait(c7d82800,5c,c13e7b79,0,0,...) at sleepq_wait+0x3f/frame 0xeba82c14 _sleep(c7d82800,c7d82820,25c,c13e7b79,0,...) at _sleep+0x2ae/frame 0xeba82c5c md_kthread(c7d82800,eba82ce8,1002,ffffffff,0,...) at md_kthread+0xd7/frame 0xeba82ca4 fork_exit(c086b050,c7d82800,eba82ce8) at fork_exit+0xa3/frame 0xeba82cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba82cd4 --- trap 0, eip = 0, esp = 0xeba82d20, ebp = 0 --- Tracing command sh pid 21 tid 100079 td 0xc7de6000 sched_switch(c7de6000,0,104,ac,98,...) at sched_switch+0x2d2/frame 0xeba6ca7c mi_switch(104,0,c7de6000,eba6cb2c,c0cda762,c7de6000) at mi_switch+0x122/frame 0xeba6cab4 sleepq_switch(c7de6000,0,c1463cfa,1a8,0,...) at sleepq_switch+0x15b/frame 0xeba6cadc sleepq_catch_signals(0,c1463cfa,154,c7de6000,eba6cba4,...) at sleepq_catch_signals+0x5be/frame 0xeba6cb30 sleepq_wait_sig(c7d9597c,74,c13fe0e5,100,0,...) at sleepq_wait_sig+0x14/frame 0xeba6cb5c _sleep(c7d9597c,c7d959b0,174,c13fe0e5,0,...) at _sleep+0x29b/frame 0xeba6cba4 kern_sigsuspend(c7de6000,0,0,0,0,...) at kern_sigsuspend+0x137/frame 0xeba6cbe8 sys_sigsuspend(c7de6000,eba6cca8,fffffed8,0,0,...) at sys_sigsuspend+0x58/frame 0xeba6cc18 syscall(eba6cce8) at syscall+0x5c9/frame 0xeba6ccdc Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba6ccdc --- syscall (4, FreeBSD ELF32, sys_write), eip = 0x281ad003, esp = 0xbfbfec0c, ebp = 0xbfbfec98 --- Tracing command vnlru pid 20 tid 100077 td 0xc7d03320 sched_switch(c7d03320,0,104,0,c1fdc4a4,...) at sched_switch+0x2d2/frame 0xeba65b5c mi_switch(104,0,101,c7d03320,eba65be8,c7d95c20) at mi_switch+0x122/frame 0xeba65b94 sleepq_switch(c7d03320,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba65bbc sleepq_timedwait(c7d95c20,60,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba65be8 _sleep(c7d95c20,c1f7a67c,260,c146b058,fffffed8,...) at _sleep+0x282/frame 0xeba65c30 vnlru_proc(0,eba65ce8,0,0,0,...) at vnlru_proc+0xcf/frame 0xeba65ca4 fork_exit(c0dae580,0,eba65ce8) at fork_exit+0xa3/frame 0xeba65cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba65cd4 --- trap 0, eip = 0, esp = 0xeba65d20, ebp = 0 --- Tracing command syncer pid 19 tid 100076 td 0xc7d03640 sched_switch(c7d03640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba62b68 mi_switch(104,0,101,c7d03640,eba62bf4,c1f7a6c4) at mi_switch+0x122/frame 0xeba62ba0 sleepq_switch(c7d03640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba62bc8 sleepq_timedwait(c1f7a6c4,0,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba62bf4 _cv_timedwait_sbt(c1f7a6c4,c1f7a6a4,fffffed8,0,0,...) at _cv_timedwait_sbt+0x1b7/frame 0xeba62c28 sched_sync(0,eba62ce8,0,0,0,...) at sched_sync+0x7a1/frame 0xeba62ca4 fork_exit(c0dadc40,0,eba62ce8) at fork_exit+0xa3/frame 0xeba62cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba62cd4 --- trap 0, eip = 0, esp = 0xeba62d20, ebp = 0 --- Tracing command bufdaemon pid 18 tid 100082 td 0xc7de5640 sched_switch(c7de5640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba77b90 mi_switch(104,0,101,c7de5640,eba77c1c,c7e07c84) at mi_switch+0x122/frame 0xeba77bc8 sleepq_switch(c7de5640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba77bf0 sleepq_timedwait(c7e07c84,54,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba77c1c _sleep(c7e07c84,c7e07c00,54,c1495e96,7fffff6c,...) at _sleep+0x282/frame 0xeba77c64 softdep_flush(c7dbbd20,eba77ce8,c0ffe030,0,eba77cd0,...) at softdep_flush+0x1fa/frame 0xeba77ca4 fork_exit(c0ffe030,c7dbbd20,eba77ce8) at fork_exit+0xa3/frame 0xeba77cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba77cd4 --- trap 0, eip = 0, esp = 0xeba77d20, ebp = 0 --- Tracing command bufdaemon pid 18 tid 100075 td 0xc7d03960 sched_switch(c7d03960,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba5fb98 mi_switch(104,0,101,c7d03960,eba5fc24,c1f79e04) at mi_switch+0x122/frame 0xeba5fbd0 sleepq_switch(c7d03960,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba5fbf8 sleepq_timedwait(c1f79e04,54,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba5fc24 _sleep(c1f79e04,c1f79d80,54,c14689fd,fffffed8,...) at _sleep+0x282/frame 0xeba5fc6c buf_daemon(0,eba5fce8,0,0,0,...) at buf_daemon+0xac/frame 0xeba5fca4 fork_exit(c0d917c0,0,eba5fce8) at fork_exit+0xa3/frame 0xeba5fcd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba5fcd4 --- trap 0, eip = 0, esp = 0xeba5fd20, ebp = 0 --- Tracing command pagezero pid 17 tid 100074 td 0xc7d03c80 sched_switch(c7d03c80,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba5cba0 mi_switch(104,0,101,c7d03c80,eba5cc2c,c1f848a8) at mi_switch+0x122/frame 0xeba5cbd8 sleepq_switch(c7d03c80,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba5cc00 sleepq_timedwait(c1f848a8,0,12b,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba5cc2c _sleep(c1f848a8,c1fe5480,0,c149a352,fffea520,...) at _sleep+0x282/frame 0xeba5cc74 vm_pagezero(0,eba5cce8,0,0,0,...) at vm_pagezero+0xd2/frame 0xeba5cca4 fork_exit(c1061320,0,eba5cce8) at fork_exit+0xa3/frame 0xeba5ccd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba5ccd4 --- trap 0, eip = 0, esp = 0xeba5cd20, ebp = 0 --- Tracing command idlepoll pid 9 tid 100073 td 0xc7d04000 sched_switch(c7d04000,0,104,0,c1fdc4a4,...) at sched_switch+0x2d2/frame 0xeba59b8c mi_switch(104,0,101,c7d04000,eba59c18,c1f59eb0) at mi_switch+0x122/frame 0xeba59bc4 sleepq_switch(c7d04000,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba59bec sleepq_timedwait(c1f59eb0,0,2,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba59c18 _sleep(c1f59eb0,0,0,c145dffd,fffffc88,...) at _sleep+0x282/frame 0xeba59c60 poll_idle(0,eba59ce8,0,0,0,...) at poll_idle+0x125/frame 0xeba59ca4 fork_exit(c0cde450,0,eba59ce8) at fork_exit+0xa3/frame 0xeba59cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba59cd4 --- trap 0, eip = 0, esp = 0xeba59d20, ebp = 0 --- Tracing command vmdaemon pid 8 tid 100072 td 0xc7d04320 sched_switch(c7d04320,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeba56b54 mi_switch(104,0,0,0,c7d04320,c1f845c4) at mi_switch+0x122/frame 0xeba56b8c sleepq_switch(c7d04320,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeba56bb4 sleepq_wait(c1f845c4,74,c14689fd,0,0,...) at sleepq_wait+0x3f/frame 0xeba56be0 _sleep(c1f845c4,c1f845ac,74,c14689fd,0,...) at _sleep+0x2ae/frame 0xeba56c28 vm_daemon(0,eba56ce8,0,0,0,...) at vm_daemon+0x130/frame 0xeba56ca4 fork_exit(c1059390,0,eba56ce8) at fork_exit+0xa3/frame 0xeba56cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba56cd4 --- trap 0, eip = 0, esp = 0xeba56d20, ebp = 0 --- Tracing command pagedaemon pid 7 tid 100078 td 0xc7d03000 sched_switch(c7d03000,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeba68ba4 mi_switch(104,0,0,0,c7d03000,c1f841a4) at mi_switch+0x122/frame 0xeba68bdc sleepq_switch(c7d03000,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeba68c04 sleepq_wait(c1f841a4,54,c149802f,0,0,...) at sleepq_wait+0x3f/frame 0xeba68c30 _sleep(c1f841a4,c1f84190,54,c149802f,0,...) at _sleep+0x2ae/frame 0xeba68c78 uma_reclaim_worker(0,eba68ce8,0,0,0,...) at uma_reclaim_worker+0xb0/frame 0xeba68ca4 fork_exit(c103ad00,0,eba68ce8) at fork_exit+0xa3/frame 0xeba68cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba68cd4 --- trap 0, eip = 0, esp = 0xeba68d20, ebp = 0 --- Tracing command pagedaemon pid 7 tid 100071 td 0xc7d04640 sched_switch(c7d04640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba53b60 mi_switch(104,0,101,c7d04640,eba53bec,c1fe5504) at mi_switch+0x122/frame 0xeba53b98 sleepq_switch(c7d04640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba53bc0 sleepq_timedwait(c1fe5504,54,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba53bec _sleep(c1fe5504,c1fe5480,54,c14689fd,fffffed8,...) at _sleep+0x282/frame 0xeba53c34 vm_pageout(0,eba53ce8,0,0,0,...) at vm_pageout+0x23b/frame 0xeba53ca4 fork_exit(c105a130,0,eba53ce8) at fork_exit+0xa3/frame 0xeba53cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba53cd4 --- trap 0, eip = 0, esp = 0xeba53d20, ebp = 0 --- Tracing command sctp_iterator pid 6 tid 100067 td 0xc7d05320 sched_switch(c7d05320,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeba47ba4 mi_switch(104,0,0,0,c7d05320,c1fdfe74) at mi_switch+0x122/frame 0xeba47bdc sleepq_switch(c7d05320,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeba47c04 sleepq_wait(c1fdfe74,0,c147f1ab,0,0,...) at sleepq_wait+0x3f/frame 0xeba47c30 _sleep(c1fdfe74,c1fdfe3c,0,c147f1ab,0,...) at _sleep+0x2ae/frame 0xeba47c78 sctp_iterator_thread(0,eba47ce8,0,0,0,...) at sctp_iterator_thread+0x9c/frame 0xeba47ca4 fork_exit(c0e8eee0,0,eba47ce8) at fork_exit+0xa3/frame 0xeba47cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba47cd4 --- trap 0, eip = 0, esp = 0xeba47d20, ebp = 0 --- Tracing command pf purge pid 5 tid 100065 td 0xc78e7640 sched_switch(c78e7640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba40b98 mi_switch(104,0,101,c78e7640,eba40c24,c0f7b2b0) at mi_switch+0x122/frame 0xeba40bd0 sleepq_switch(c78e7640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba40bf8 sleepq_timedwait(c0f7b2b0,0,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba40c24 _sleep(c0f7b2b0,c1fe2df4,0,c148b207,1999997c,...) at _sleep+0x282/frame 0xeba40c6c pf_purge_thread(0,eba40ce8,0,0,0,...) at pf_purge_thread+0xba/frame 0xeba40ca4 fork_exit(c0f7b2b0,0,eba40ce8) at fork_exit+0xa3/frame 0xeba40cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeba40cd4 --- trap 0, eip = 0, esp = 0xeba40d20, ebp = 0 --- Tracing command usb pid 16 tid 100057 td 0xc793f000 sched_switch(c793f000,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9f4bb8 mi_switch(104,0,0,0,c793f000,c7923d64) at mi_switch+0x122/frame 0xeb9f4bf0 sleepq_switch(c793f000,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9f4c18 sleepq_wait(c7923d64,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9f4c44 _cv_wait(c7923d64,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9f4c74 usb_process(c7923d5c,eb9f4ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9f4ca4 fork_exit(c0a97af0,c7923d5c,eb9f4ce8) at fork_exit+0xa3/frame 0xeb9f4cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeb9f4cd4 --- trap 0, eip = 0, esp = 0xeb9f4d20, ebp = 0 --- Tracing command usb pid 16 tid 100056 td 0xc793f320 sched_switch(c793f320,0,104,40008,0,...) at sched_switch+0x2d2/frame 0xeb9f1bb8 mi_switch(104,0,c78b0fc8,c0d0208d,c793f320,c7923d34) at mi_switch+0x122/frame 0xeb9f1bf0 sleepq_switch(c793f320,0,c1463cfa,269,500,...) at sleepq_switch+0x15b/frame 0xeb9f1c18 sleepq_wait(c7923d34,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9f1c44 _cv_wait(c7923d34,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9f1c74 usb_process(c7923d2c,eb9f1ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9f1ca4 fork_exit(c0a97af0,c7923d2c,eb9f1ce8) at fork_exit+0xa3/frame 0xeb9f1cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeb9f1cd4 --- trap 0, eip = 0, esp = 0xeb9f1d20, ebp = 0 --- Tracing command usb pid 16 tid 100055 td 0xc793f640 sched_switch(c793f640,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9eebb8 mi_switch(104,0,0,0,c793f640,c7923d04) at mi_switch+0x122/frame 0xeb9eebf0 sleepq_switch(c793f640,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9eec18 sleepq_wait(c7923d04,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9eec44 _cv_wait(c7923d04,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9eec74 usb_process(c7923cfc,eb9eece8,0,0,0,...) at usb_process+0xf6/frame 0xeb9eeca4 fork_exit(c0a97af0,c7923cfc,eb9eece8) at fork_exit+0xa3/frame 0xeb9eecd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeb9eecd4 --- trap 0, eip = 0, esp = 0xeb9eed20, ebp = 0 --- Tracing command usb pid 16 tid 100054 td 0xc793f960 sched_switch(c793f960,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9ebbb8 mi_switch(104,0,0,0,c793f960,c7923cd4) at mi_switch+0x122/frame 0xeb9ebbf0 sleepq_switch(c793f960,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9ebc18 sleepq_wait(c7923cd4,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9ebc44 _cv_wait(c7923cd4,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9ebc74 usb_process(c7923ccc,eb9ebce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9ebca4 fork_exit(c0a97af0,c7923ccc,eb9ebce8) at fork_exit+0xa3/frame 0xeb9ebcd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeb9ebcd4 --- trap 0, eip = 0, esp = 0xeb9ebd20, ebp = 0 --- Tracing command usb pid 16 tid 100053 td 0xc793fc80 sched_switch(c793fc80,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9e8bb8 mi_switch(104,0,0,0,c793fc80,c7923ca4) at mi_switch+0x122/frame 0xeb9e8bf0 sleepq_switch(c793fc80,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9e8c18 sleepq_wait(c7923ca4,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9e8c44 _cv_wait(c7923ca4,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9e8c74 usb_process(c7923c9c,eb9e8ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9e8ca4 fork_exit(c0a97af0,c7923c9c,eb9e8ce8) at fork_exit+0xa3/frame 0xeb9e8cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeb9e8cd4 --- trap 0, eip = 0, esp = 0xeb9e8d20, ebp = 0 --- Tracing command usb pid 16 tid 100052 td 0xc78abc80 sched_switch(c78abc80,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9e3bb8 mi_switch(104,0,0,0,c78abc80,c790dddc) at mi_switch+0x122/frame 0xeb9e3bf0 sleepq_switch(c78abc80,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9e3c18 sleepq_wait(c790dddc,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9e3c44 _cv_wait(c790dddc,c790df48,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9e3c74 usb_process(c790ddd4,eb9e3ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9e3ca4 fork_exit(c0a97af0,c790ddd4,eb9e3ce8) at fork_exit+0xa3/frame 0xeb9e3cd4 fork_trampoline() at fork_trampoline+0x8/frame 0xeb9e3cd4 --- trap 0, eip = 0, esp = 0xeb9e3d20, ebp = 0 --- Maybe it help to diagnose my problem? [/thread] -
Hello 2 all.
Really its a magic…For a few days after this trouble, i download the same image and make clean install again...
All working fine without any errors. I am stuck.
But problem is solved.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.