Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    How to boot SG4860 into USB installer?

    Scheduled Pinned Locked Moved
    Official Netgate® Hardware
    2
    18
    1.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pfguy2017
      last edited by

      Still not working.  I can't hit F12 to change boot order, and if I let it go, I get to a menu where I can select F1 to boot pfSense or F5 to boot disk1 or F6 (? not sure) to boot PXE or something like that.  Hitting F5 just fills the screen with # symbols (very slowly) and never seems to progress to anything - I have left it for up to 10 min and nothing more happens.  If I hit F1, it boots the already-installed pfSense.

      I am stuck here.  Can't seem to get the installer to work. (BTW, have tried 3 different flash drives, all USB2, all different manufacturers - same result with all)

      Any suggestions?

      1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate
        last edited by

        Try Fn-F12 on the Mac. You might have to coerce that platform to actually send the F-key.

        Not sure that ZFS would be the best choice on a small-disk platform anyway, but you need to know you can reinstall.

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        1 Reply Last reply Reply Quote 0
        • P
          pfguy2017
          last edited by

          OK - was able to deal with F12 issue by using a third party terminal app.
          So it turns out that the SG-4860 is not "seeing" the USB drives (tried all 3, after reimaging using etcher)
          The default order of booting is exactly as you have indicated.
          However, when I hit F12, choice #1 does not show up at all - i.e. there is no listing for USB MSC Drive Generic Flash Disk 8.07.  The first choice is AHCI

          So that explains why the installer is not booting
          Now how can I fix it?

          1 Reply Last reply Reply Quote 0
          • DerelictD
            Derelict LAYER 8 Netgate
            last edited by

            Not sure. Did you try both USB ports?

            Does the unit boot at all? When booted and you insert one do you get console messages about da0 or da1 being inserted?

            1. Halt system                      15) Restore recent configuration
            2. Ping host                        16) Restart PHP-FPM
            3. Shell

            Enter an option: ugen0.4: <generic mass="" storage="">at usbus0
            umass1 on uhub1
            umass1: <generic 0="" 4="" mass="" storage,="" class="" 0,="" rev="" 2.00="" 1.06,="" addr="">on usbus0
            da1 at umass-sim1 bus 1 scbus7 target 0 lun 0
            da1: <generic flash="" disk="" 8.07="">Removable Direct Access SPC-2 SCSI device
            da1: Serial Number 8291C764
            da1: 40.000MB/s transfers
            da1: 7681MB (15730688 512 byte sectors)
            da1: quirks=0x2 <no_6_byte>GEOM: da1: the secondary GPT header is not in the last LBA.
            GEOM: diskid/DISK-8291C764: the secondary GPT header is not in the last LBA.

            What about a mouse or something?

            1. Halt system                      15) Restore recent configuration
            2. Ping host                        16) Restart PHP-FPM
            3. Shell

            Enter an option: ugen0.4: <logitech optical="" usb="" mouse="">at usbus0
            ugen0.4: <logitech optical="" usb="" mouse="">at usbus0 (disconnected)

            Sounds like you might have broken USB ports.</logitech></logitech></no_6_byte></generic></generic></generic>

            Chattanooga, Tennessee, USA
            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
            Do Not Chat For Help! NO_WAN_EGRESS(TM)

            1 Reply Last reply Reply Quote 0
            • P
              pfguy2017
              last edited by

              You led me to the answer.  I had followed the online instructions, which indicated that the topmost USB port should be used.  When I switched the USB stick to the bottom port, it worked, and I was able to boot into the installer.  I proceeded with the install and it seems to have been successful.  However, the console output became completely garbled after the reboot, and I am not sure how to fix that.  Was able to log into the default user name/password at 192.168.1.1, and then recover a configuration from backup.  Now up and running!

              Thanks for your help.  If you have any pointers about the garbled console output, it would probably be a good thing for me to know, fo the next time I have to rely on the console.

              1 Reply Last reply Reply Quote 0
              • DerelictD
                Derelict LAYER 8 Netgate
                last edited by

                Sounds like your config might have the wrong console baud rate or something. Everything on the SG-4860 should always be 115200.

                It's at the bottom of System > Advanced.

                Chattanooga, Tennessee, USA
                A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                Do Not Chat For Help! NO_WAN_EGRESS(TM)

                1 Reply Last reply Reply Quote 0
                • P
                  pfguy2017
                  last edited by

                  Thanks. It was set correctly there, but I suspect it might not have been set correctly in the terminal app.  Have disconnected, so will try that again next time

                  One more wrinkle I can't figure out:  when the system rebooted, I was not longer to access it by its internal name on the domain (pfsense.lan).  Everything else .lan is working (e.g. NAS.lan, etc), but not the pfsense device itself.  Can still access it no problem via its IP address.  This has persisted despite rebooting the device and all network hardware.  Any suggestions?

                  1 Reply Last reply Reply Quote 0
                  • DerelictD
                    Derelict LAYER 8 Netgate
                    last edited by

                    Does it not resolve or not connect? Is there a host name override for it?

                    Chattanooga, Tennessee, USA
                    A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                    DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                    Do Not Chat For Help! NO_WAN_EGRESS(TM)

                    1 Reply Last reply Reply Quote 0
                    • P
                      pfguy2017
                      last edited by

                      @Derelict:

                      Does it not resolve or not connect? Is there a host name override for it?

                      It does not resolve at all.  There is a host name override for it in DNS resolver, and it is also set under system – general setup.  It had always worked prior to reinstalling 2.4.0 on ZFS (it worked on 2.4.0 on UFS - I can't imagine why that would be the issue). I even tried generating a new cert, but no success.  It is not a showstopper, as I can access directly via the IP address, but it is curious.

                      1 Reply Last reply Reply Quote 0
                      • P
                        pfguy2017
                        last edited by

                        Actually, now I can't access anything .lan.
                        Not sure what is going on here.

                        1 Reply Last reply Reply Quote 0
                        • P
                          pfguy2017
                          last edited by

                          Seems to be only my main computer that can't access the .lan addresses.  Other devices on the network can.

                          1 Reply Last reply Reply Quote 0
                          • P
                            pfguy2017
                            last edited by

                            And now it is working for every device.

                            /end thread

                            @Derelict - thank you very much for your help!

                            1 Reply Last reply Reply Quote 0
                            • DerelictD
                              Derelict LAYER 8 Netgate
                              last edited by

                              Glad it's all working.

                              Chattanooga, Tennessee, USA
                              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                              Do Not Chat For Help! NO_WAN_EGRESS(TM)

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post