How to add users on running vpn
-
"user" and "peer-to-peer" are mutually-exclusive.
You will need to describe what you want to do more clearly.
-
My VPN is running peer to peer server and client between two locations. Now I want to add a remote user?
-
Still no idea what you want to do.
-
I have two pfsense running OpenVPN peer to peer, one as server and other one as client.
Now I need to add a remote user.
 -
Do this on one side or the other:
https://doc.pfsense.org/index.php/OpenVPN_Remote_Access_Server
-
Thx
-
This is what I'm trying to do:
Site A(server) and Site B are set-up in a peer to peer vpn
Site A is also running Remote Access VPN
Site A and Site B communicate perfectly
Remote Access Users(android) communicate with Site A as expected
So Now I Just need Remote Access Users to Communicate with Site B and Site A simultaneously
-
You need to add the tunnel network for the Remote Access VPN on site A as a Remote Network on the Site B site-to-site client configuration.
Assuming you configured your Remote Access VPN with redirect gateway. If not you need to add the Site B LAN network as a Local Network on the Remote Access server setup.
-
Answer here:
http://blog.stefcho.eu/routing-road-warrior%e2%80%99s-clients-through-a-site-to-site-vpn-with-pfsense-2-0-rc1-and-openvpn/
hint:
"route 10.123.45.0 255.255.255.0" = Is Tunnel Network for remote access vpn) -
No. Add them to the proper Local and Remote Networks fields.
That link is for an ancient version.
-
I tried that biased on my understanding of the options presented by pfsense GUI. I was unable to make it work….. Now that I think about it i may have entered it in Site A's Config. I will try again tomorrow.
