How to add users on running vpn

[irs]

My VPN is running peer to peer server and client between two locations. Now I want to add a remote user?

[Derelict]

Still no idea what you want to do.

[irs]

I have two pfsense running OpenVPN peer to peer, one as server and other one as client.

Now I need to add a remote user.


[Derelict]

Do this on one side or the other:

https://doc.pfsense.org/index.php/OpenVPN_Remote_Access_Server

[irs]

Thx

[deathvenom369]

This is what I'm trying to do:

Site A(server) and Site B are set-up in a peer to peer vpn

Site A is also running Remote Access VPN

Site A and Site B communicate perfectly

Remote Access Users(android) communicate with Site A as expected

So Now I Just need Remote Access Users to Communicate with Site B and Site A simultaneously

[Derelict]

You need to add the tunnel network for the Remote Access VPN on site A as a Remote Network on the Site B site-to-site client configuration.

Assuming you configured your Remote Access VPN with redirect gateway. If not you need to add the Site B LAN network as a Local Network on the Remote Access server setup.

[deathvenom369]

Answer here:

http://blog.stefcho.eu/routing-road-warrior%e2%80%99s-clients-through-a-site-to-site-vpn-with-pfsense-2-0-rc1-and-openvpn/

hint:
"route 10.123.45.0 255.255.255.0" = Is Tunnel Network for remote access vpn)

[Derelict]

No. Add them to the proper Local and Remote Networks fields.

That link is for an ancient version.

[deathvenom369]

I tried that biased on my understanding of the options presented by pfsense GUI. I was unable to make it work….. Now that I think about it i may have entered it in Site A's Config. I will try again tomorrow.