No internet on OPT1
-
Hello
I installed pfsense with the following configuration :IP box : 192.168.0.254
IP WAN : 192.168.0.253 with Gateway 192.168.0.254
LAN : 192.168.27.254
OPT1 : 192.168.28.1(DHCP server actived on LAN and OP1, it's ok).
I want to separate the LAN from OPT1 (we should not be able to access pfsense or the box from opt1).
I have internet on the LAN but not on opt1.
What did not I do for it to work please?
Thank you
-
Be sure you have the following on OPT1, or at least available to the clients on OPT1:
DHCP Server
DNS Server
Firewall Rules blocking or passing the desired traffic
Outbound NAT -
DHCP server and DNS it's ok.
On the firewall outbound i choose AON et i can see :
WAN SOURCE 192.168.28.0/24 PORT DESTINATION 500 WAN ADRESS
and the same but it's a "*" and not 500 in port destinationFirewall i have no rules, i don't know which rules create.
thank for your help
-
You need rules that pass or block the desired/undesired traffic from OPT1 hosts.
Start by putting the default rule as found on LAN but adjusted for OPT1.
-
I put the same 2 rules as the LAN on OPT1 but I can not create the rule ANTI LOCKOUT RULE (port 443-80).
I don't think it's the cause of the problem.I don't see what to do :-[
-
Post your rules.
https://doc.pfsense.org/index.php/Connectivity_Troubleshooting
-
-
Your rules are not just like the LAN rules. They are TCP-only. Change them to protocol any.
What are those three alerts in the upper right corner?
-
Thaaaaaaaankssssss !!!!!
it was "ANY" and not "TCP"Perfect !!!
The 3 alerts came from a bad old configutaion dhcp.
Thank you Derelict !!
-
Sorry but now, i want add a web filter on OPT1 only.
I installed Squid and Squidguard, I followed tutorials but how to assign filtering on OPT1 ??
Thanks
-
Start a new thread in the Cache/Proxy forum.
-
Ok thanks