No internet on OPT1

Derelict

Be sure you have the following on OPT1, or at least available to the clients on OPT1:

DHCP Server
DNS Server
Firewall Rules blocking or passing the desired traffic
Outbound NAT

shubakas

DHCP server and DNS it's ok.

On the firewall outbound i choose AON et i can see :
WAN SOURCE 192.168.28.0/24 PORT DESTINATION 500 WAN ADRESS
and the same but it's a "*" and not 500 in port destination

Firewall i have no rules, i don't know which rules create.

thank for your help

Derelict

You need rules that pass or block the desired/undesired traffic from OPT1 hosts.

Start by putting the default rule as found on LAN but adjusted for OPT1.

shubakas

I put the same 2 rules as the LAN on OPT1 but I can not create the rule ANTI LOCKOUT RULE (port 443-80).
I don't think it's the cause of the problem.

I don't see what to do :-[

Derelict

Post your rules.

https://doc.pfsense.org/index.php/Connectivity_Troubleshooting

shubakas

The name "BLEU" is "OPT1"

Derelict

Your rules are not just like the LAN rules. They are TCP-only. Change them to protocol any.

What are those three alerts in the upper right corner?

shubakas

Thaaaaaaaankssssss !!!!!
it was "ANY" and not "TCP"

Perfect !!!

The 3 alerts came from a bad old configutaion dhcp.

Thank you Derelict !!

shubakas

Sorry but now, i want add a web filter on OPT1 only.

I installed Squid and Squidguard, I followed tutorials but how to assign filtering on OPT1 ??

Thanks

KOM

Start a new thread in the Cache/Proxy forum.

shubakas

Ok thanks