Internet drops when saturating download

stephenw10

If you have only one WAN the gateway monitor really doesn't have to do much more than log data.
I would edit the gateway In System > Routing > Gateways and set Disable Gateway Monitoring Action.
See what difference that makes.

It should still log packet loss on the WAN but will not trigger anything.

Steve

darkgamer120

Hi,
I've disabled that open here: alt text

Ran a test, and got disconnected again.
Here is the log from when the drop happens and the internet comes back up: https://pastebin.com/raw/UAeUvKvu

stephenw10

2018-06-13T20:44:33+01:00 archer.router.home.darkgamer.me ppp: [wan_link0] LCP: rec'd Terminate Request #2 (Opened)

Something told it to close the link.

Have you tried any sort of traffic shaping to prevent it completely saturating it?

Steve

GTAXL

The better question is what could be terminating it? He shouldn't have to traffic shape to stop his Internet from dropping.

stephenw10

That's true I would not expect it.

Some ISPs have weird policies where they punish you for going over the allocated bandwidth. Not ever seen that on a PPPoE connection though.

Steve

GTAXL

What do you mean, monthly bandwidth cap or getting more speed than you pay for? So you think this may be on the ISP side closing the PPPoE connection? The SG-1000 can handle 80Mbps PPPoE right?

stephenw10

I mean getting more speed that they have allowed. Very unlikely here I agree...

And now I see you;re using Zen in the UK so forget that as a theory.

The SG-1000 should pass 80Mbps, yes. Usual caveats apply there but I wouldn't expect that to be the issue.

Steve

Probably what is happening is your SG-1000 is getting so swamped it can't reply to the PPPoE keepalive (LCP Echo Request) messages, so the BNG considers the session to be down (it doesn't see LCP Echo Replies) and terminates it.

It might also be that the device sending all the traffic to his SG-1000 isn't able to handle this sort of load and is dropping the PPPoE LCP messages.

That's where I'd be looking. Be good to try and tcpdump the PPPoE interface, but on a CPU constrained device like the SG-1000, doing this might exacerbate the problem.

Gertjan

@darkgamer120 said in Internet drops when saturating download:

nd a Draytek Vigor 130 as the modem in bridged mode.

A Windows PC 'speaks' pppoe very well, so hook it up directly after this modem.
You could eliminate the SG-1000 from the chain a couple of moments, see if that that changes anything.

GTAXL

At first his ISP thought he was going over his rated speed, but we traffic shaped and determined that was not the problem. His ISP now thinks it is the PPPoE Keep Alives not being recieved thus terminating his line. How would he got about mitigating this on the SG-1000?

Here is what the ISP said,
alt text