A little help setting up a connection

Trendkill99

For some minutes..5 or so.

I will do this edit/save wan now.

Derelict

FWIW, my upstream (Cox) sends an RA every 4 seconds or so.

Internet Control Message Protocol v6
    Type: Router Advertisement (134)
    Code: 0
    Checksum: 0xfa70 [correct]
    [Checksum Status: Good]
    Cur hop limit: 64
    Flags: 0xc0, Managed address configuration, Other configuration, Prf (Default Router Preference): Medium
    Router lifetime (s): 1800
    Reachable time (ms): 3600000
    Retrans timer (ms): 0
    ICMPv6 Option (Source link-layer address : 2c:86:d2:89:20:19)
        Type: Source link-layer address (1)
        Length: 1 (8 bytes)
        Link-layer address: 2c:86:d2:89:20:19
    ICMPv6 Option (MTU : 1500)
        Type: MTU (5)
        Length: 1 (8 bytes)
        Reserved
        MTU: 1500

Trendkill99

@derelict

I don't know where can I see this info.

My wireshark capture now have some things related to ipv6

Derelict

Yeah. See those router solicitations in the second screen shot that aren't being responded to?

There's your problem. pfSense is asking, they're not responding.

You can limit the capture to protocol ICMPv6 to eliminate a lot of that noise too.

Trendkill99

@derelict

So in this case I really need to contact my isp to change the cable modem right?

Derelict

All pfSense can do is send the Router Solicitations and listen for Router Advertisements, so, yes. I don't see how anyone other than the ISP can help here.

Note that the last screen shot is full of Neighbor Solicitations which is more like the equivalent of ARP in IPv4.

Trendkill99

@derelict

Thank you for helping me. I will contact isp and see what they can do for me.

Trendkill99

I have contacted them and they suggested me to change my cable modem.

Derelict

Hmm. Did they make a recommendation? I use a Netgear CM600 here. Pretty much the only thing I don't like is how tall it is.

Trendkill99

@derelict

No, they use to change these equipments according to availability. At this moment they only have Humax and Arris (that I already have).

Derelict

"Can I get one that works with IPv6?"

Trendkill99

@derelict

I will ask for the humax model. I have a friend using this model without problems.