Route specific IP Range via IPSEC VPN.

[zMaliz]

Hi

I'm trying to work out how to route some traffic.

I have an IPSEC VPN to a remote office. Traffic to and from the remote site is fine.

Local IP - 192.168.16.0/24
Remote Office IP - 192.168.19.0/24

From the remote office is a VPN to a hosted data centre.
Host IP - 10.0.0.0/24

From my PC I can ping anything on the 192.168.19.0/24 network, but not on the 10.0.0.0/24 network.
If I SSH to device on 192.168.19.2 I can then ping 10.0.0.1

From My PC if I traceroute 10.0.0.1 I see that attempt to route out via my broadband connection, so I assume I need to add a route to say any 10.0.0.0/24 traffic route via IPSEC VPN.

Can some one advice how I do this ?
Thanks

[stephenw10]

You need to add Phase 2 entries to cover the traffic between 192.168.16.X and 10.0.0.X. Those need to be on both tunnels.

Steve