Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    FreeRadius server not starting in 2.4.4

    Scheduled Pinned Locked Moved General pfSense Questions
    21 Posts 2 Posters 3.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      strangegopher
      last edited by

      @emammadov said in FreeRadius server not starting in 2.4.4:

      NAS IP Attribute

      this is the interface ip address you set in FreeRADIUS/Interfaces.
      As for it not starting up, there was a bug in older version of freeradius, try checking for updates.
      Also check output of radiusd -X

      1 Reply Last reply Reply Quote 0
      • emammadovE
        emammadov
        last edited by emammadov

        Thank you for your answer. We have wan, lan (192.168.2.0/24), op1 (192.168.4.0/24). Servers are in 192.168.2.0/24 network and employees are in 192.168.4.0/24 network. We access pfsense url either https://192.168.2.1 and https://192.168.4.1. I didn't exactly understand which one should I choose. Do I have to remove and install freeradius to work it properly?

        Elvin

        1 Reply Last reply Reply Quote 0
        • S
          strangegopher
          last edited by strangegopher

          Go under System > Package Manager you should see icon next to freeradius package to update it.
          Just choose any interface ip, if the nas (like a wireless access point) is on 192.168.4.0/24 network then pick 192.168.4.1
          If you are just using freeradius for just pfsense login then you can choose 192.168.2.1
          You can also add both if you like under FreeRADIUS > Interfaces and pick lan or opt1 you like in auth server. Make sure to set correct port (1812 for auth and 1813 for accounting)

          1 Reply Last reply Reply Quote 0
          • emammadovE
            emammadov
            last edited by emammadov

            There is no update for freeradius. I just uninstalled radius, didn't restart pfsense and installed radus again. But it didn't work either. Radius server doesn't start.

            Elvin

            1 Reply Last reply Reply Quote 0
            • S
              strangegopher
              last edited by

              go into Diagnostics > Command Prompt
              under "Execute Shell Command" enter this command and hit execute: radiusd -X
              what are the errors you getting in the output?

              1 Reply Last reply Reply Quote 0
              • emammadovE
                emammadov
                last edited by emammadov

                I entered this command in shell, but it loaded too long and gave this error: 504 Gateway Time-out
                nginx

                I loggen in pfsense again and saw Radius serve started, if I stop and start again, it doesn't start. Now the output of this command are as following, it is too long.

                FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/googleauth
including configuration file /usr/local/etc/raddb/mods-enabled/datacounter_acct
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/motp
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/counter
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/pfs_custom_policies
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls
main {
 security {
 	allow_core_dumps = no
 }
	name = "radiusd"
	prefix = "/usr/local"
	localstatedir = "/var"
	logdir = "/var/log"
	run_dir = "/var/run"
}
main {
	name = "radiusd"
	prefix = "/usr/local"
	localstatedir = "/var"
	sbindir = "/usr/local/sbin"
	logdir = "/var/log"
	run_dir = "/var/run"
	libdir = "/usr/local/lib/freeradius-3.0.17"
	radacctdir = "/var/log/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/var/run/radiusd.pid"
	checkrad = "/usr/local/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = yes
 	auth_badpass = no
 	auth_goodpass = no
 	msg_badpass = ""
 	msg_goodpass = ""
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = no
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client pfsense {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "udp"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = MOTP
 # Creating Auth-Type = GOOGLEAUTH
 # Creating Autz-Type = Status-Server
 # Creating Acct-Type = Status-Server
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_exec
  # Loading module "googleauth" from file /usr/local/etc/raddb/mods-enabled/googleauth
  exec googleauth {
  	wait = yes
  	program = "/usr/local/etc/raddb/scripts/googleauth.py %{request:User-Name} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{request:User-Password}"
  	shell_escape = yes
  }
  # Loading module "datacounterdaily" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacounterdaily {
  	wait = yes
  	program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} daily %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
  	shell_escape = yes
  }
  # Loading module "datacounterweekly" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacounterweekly {
  	wait = yes
  	program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} weekly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
  	shell_escape = yes
  }
  # Loading module "datacountermonthly" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacountermonthly {
  	wait = yes
  	program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} monthly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
  	shell_escape = yes
  }
  # Loading module "datacounterforever" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacounterforever {
  	wait = yes
  	program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} forever %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
  	shell_escape = yes
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loading module "motp" from file /usr/local/etc/raddb/mods-enabled/motp
  exec motp {
  	wait = yes
  	program = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/otpverify.sh %{request:User-Name} %{request:User-Password} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{reply:MOTP-Offset}"
  	shell_escape = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
  	filename = "/var/log/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
  	filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = yes
  }
  # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = yes
  }
  # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = yes
  }
  # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\"
  	ignore_default = no
  	ignore_null = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/radwtmp"
  }
Creating attribute Unix-Group
  # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
  	hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_counter
  # Loading module "daily" from file /usr/local/etc/raddb/mods-enabled/counter
  counter daily {
  	filename = "/var/log/radacct/timecounter/db.daily"
  	key = "User-Name"
  	reset = "daily"
  	count_attribute = "Acct-Session-Time"
  	counter_name = "Daily-Session-Time"
  	check_name = "Max-Daily-Session"
  	reply_name = "Session-Timeout"
  	cache_size = 5000
  }
  # Loading module "weekly" from file /usr/local/etc/raddb/mods-enabled/counter
  counter weekly {
  	filename = "/var/log/radacct/timecounter/db.weekly"
  	key = "User-Name"
  	reset = "weekly"
  	count_attribute = "Acct-Session-Time"
  	counter_name = "Weekly-Session-Time"
  	check_name = "Max-Weekly-Session"
  	reply_name = "Session-Timeout"
  	cache_size = 5000
  }
  # Loading module "monthly" from file /usr/local/etc/raddb/mods-enabled/counter
  counter monthly {
  	filename = "/var/log/radacct/timecounter/db.monthly"
  	key = "User-Name"
  	reset = "monthly"
  	count_attribute = "Acct-Session-Time"
  	counter_name = "Monthly-Session-Time"
  	check_name = "Max-Monthly-Session"
  	reply_name = "Session-Timeout"
  	cache_size = 5000
  }
  # Loading module "forever" from file /usr/local/etc/raddb/mods-enabled/counter
  counter forever {
  	filename = "/var/log/radacct/timecounter/db.forever"
  	key = "User-Name"
  	reset = "never"
  	count_attribute = "Acct-Session-Time"
  	counter_name = "Forever-Session-Time"
  	check_name = "Max-Forever-Session"
  	reply_name = "Session-Timeout"
  	cache_size = 5000
  }
  # Loaded module rlm_files
  # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
  	filename = "/usr/local/etc/raddb/mods-config/files/authorize"
  	acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
  	preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
  	default_eap_type = "mschapv2"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 4096
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
  date {
  	format = "%b %e %Y %H:%M:%S %Z"
  	utc = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  instantiate {
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  # Instantiating module "daily" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539678732 [2018-10-16 12:32:12], Next reset 1539720000 [2018-10-17 00:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 1539720000
rlm_counter: DEFAULT2 set to 1539678732
rlm_counter: add_defaults: End
  # Instantiating module "weekly" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539678732 [2018-10-16 12:32:12], Next reset 1540065600 [2018-10-21 00:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 1540065600
rlm_counter: DEFAULT2 set to 1539678732
rlm_counter: add_defaults: End
  # Instantiating module "monthly" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539678732 [2018-10-16 12:32:12], Next reset 1541016000 [2018-11-01 00:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 1541016000
rlm_counter: DEFAULT2 set to 1539678732
rlm_counter: add_defaults: End
  # Instantiating module "forever" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539678732 [2018-10-16 12:32:12], Next reset 0 [2018-10-16 12:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 0
rlm_counter: DEFAULT2 set to 1539678732
rlm_counter: add_defaults: End
  }
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	verify_depth = 0
   	ca_path = "/usr/local/etc/raddb/certs"
   	pem_file_type = yes
   	private_key_file = "/usr/local/etc/raddb/certs/server_key.pem"
   	certificate_file = "/usr/local/etc/raddb/certs/server_cert.pem"
   	ca_file = "/usr/local/etc/raddb/certs/ca_cert.pem"
   	dh_file = "/usr/local/etc/raddb/certs/dh"
   	random_file = "/dev/urandom"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	ecdh_curve = "prime256v1"
   	tls_max_version = ""
   	tls_min_version = "1.0"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = no
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel-ttls"
   	include_length = yes
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel-peap"
   	soh = no
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading pre-proxy {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel-peap { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel-peap
server inner-tunnel-ttls { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel-ttls
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = *
  	port = 1812
Failed binding to auth address * port 1812 bound to server default: Address already in use
/usr/local/etc/raddb/sites-enabled/default[2]: Error binding to port for 0.0.0.0 port 1812

                Elvin

                S 1 Reply Last reply Reply Quote 0
                • S
                  strangegopher
                  last edited by

                  it really shouldn't do that. Enable ssh for now (you can disable it later) under "System" > "Advanced" and hit save.
                  If you are on windows install ssh program like putty. Enter the ip address of pfsense and hit open. login with your pfsense username/password. When connected to ssh, select option 8 for shell. and try radiusd -X again.

                  1 Reply Last reply Reply Quote 0
                  • S
                    strangegopher @emammadov
                    last edited by strangegopher

                    @emammadov ignore the last post, we got the output we wanted. i think i know what is wrong, what is the ip address set for auth under Services > FreeRADIUS > Interfaces

                    It should be either 192.168.4.1 or 192.168.2.1

                    1 Reply Last reply Reply Quote 0
                    • emammadovE
                      emammadov
                      last edited by emammadov

                      I deleted * from interfaces and added 192.168.2.1 and 192.168.4.1, but it didn't help too. My screenshots and output from ssh are as following. I have used radius for pfsense webgui in 2.4.3p1.

                      0_1539681859463_1.jpg
                      0_1539681864534_2.jpg
                      0_1539681869419_3.jpg
                      0_1539681873433_4.jpg

                      Enter an option: 8

[2.4.4-RELEASE][admin@pfsense.smart.az]/root: radiusd -X
FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/googleauth
including configuration file /usr/local/etc/raddb/mods-enabled/datacounter_acct
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/motp
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/counter
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/pfs_custom_policies
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls
main {
 security {
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/var"
        logdir = "/var/log"
        run_dir = "/var/run"
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/var"
        sbindir = "/usr/local/sbin"
        logdir = "/var/log"
        run_dir = "/var/run"
        libdir = "/usr/local/lib/freeradius-3.0.17"
        radacctdir = "/var/log/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = yes
        auth_badpass = no
        auth_goodpass = no
        msg_badpass = ""
        msg_goodpass = ""
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = no
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client pfsense {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "udp"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = MOTP
 # Creating Auth-Type = GOOGLEAUTH
 # Creating Autz-Type = Status-Server
 # Creating Acct-Type = Status-Server
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_exec
  # Loading module "googleauth" from file /usr/local/etc/raddb/mods-enabled/googleauth
  exec googleauth {
        wait = yes
        program = "/usr/local/etc/raddb/scripts/googleauth.py %{request:User-Name} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{request:User-Password}"
        shell_escape = yes
  }
  # Loading module "datacounterdaily" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacounterdaily {
        wait = yes
        program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} daily %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
        shell_escape = yes
  }
  # Loading module "datacounterweekly" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacounterweekly {
        wait = yes
        program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} weekly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
        shell_escape = yes
  }
  # Loading module "datacountermonthly" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacountermonthly {
        wait = yes
        program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} monthly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
        shell_escape = yes
  }
  # Loading module "datacounterforever" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec datacounterforever {
        wait = yes
        program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} forever %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
        shell_escape = yes
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loading module "motp" from file /usr/local/etc/raddb/mods-enabled/motp
  exec motp {
        wait = yes
        program = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/otpverify.sh %{request:User-Name} %{request:User-Password} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{reply:MOTP-Offset}"
        shell_escape = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = yes
  }
  # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = yes
  }
  # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = yes
  }
  # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radwtmp"
  }
Creating attribute Unix-Group
  # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_counter
  # Loading module "daily" from file /usr/local/etc/raddb/mods-enabled/counter
  counter daily {
        filename = "/var/log/radacct/timecounter/db.daily"
        key = "User-Name"
        reset = "daily"
        count_attribute = "Acct-Session-Time"
        counter_name = "Daily-Session-Time"
        check_name = "Max-Daily-Session"
        reply_name = "Session-Timeout"
        cache_size = 5000
  }
  # Loading module "weekly" from file /usr/local/etc/raddb/mods-enabled/counter
  counter weekly {
        filename = "/var/log/radacct/timecounter/db.weekly"
        key = "User-Name"
        reset = "weekly"
        count_attribute = "Acct-Session-Time"
        counter_name = "Weekly-Session-Time"
        check_name = "Max-Weekly-Session"
        reply_name = "Session-Timeout"
        cache_size = 5000
  }
  # Loading module "monthly" from file /usr/local/etc/raddb/mods-enabled/counter
  counter monthly {
        filename = "/var/log/radacct/timecounter/db.monthly"
        key = "User-Name"
        reset = "monthly"
        count_attribute = "Acct-Session-Time"
        counter_name = "Monthly-Session-Time"
        check_name = "Max-Monthly-Session"
        reply_name = "Session-Timeout"
        cache_size = 5000
  }
  # Loading module "forever" from file /usr/local/etc/raddb/mods-enabled/counter
  counter forever {
        filename = "/var/log/radacct/timecounter/db.forever"
        key = "User-Name"
        reset = "never"
        count_attribute = "Acct-Session-Time"
        counter_name = "Forever-Session-Time"
        check_name = "Max-Forever-Session"
        reply_name = "Session-Timeout"
        cache_size = 5000
  }
  # Loaded module rlm_files
  # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
        filename = "/usr/local/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "mschapv2"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 4096
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  instantiate {
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  # Instantiating module "daily" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539681453 [2018-10-16 13:17:33], Next reset 1539720000 [2018-10-17 00:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 1539720000
rlm_counter: DEFAULT2 set to 1539681453
rlm_counter: add_defaults: End
  # Instantiating module "weekly" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539681453 [2018-10-16 13:17:33], Next reset 1540065600 [2018-10-21 00:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 1540065600
rlm_counter: DEFAULT2 set to 1539681453
rlm_counter: add_defaults: End
  # Instantiating module "monthly" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539681453 [2018-10-16 13:17:33], Next reset 1541016000 [2018-11-01 00:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 1541016000
rlm_counter: DEFAULT2 set to 1539681453
rlm_counter: add_defaults: End
  # Instantiating module "forever" from file /usr/local/etc/raddb/mods-enabled/counter
rlm_counter: Current Time: 1539681453 [2018-10-16 13:17:33], Next reset 0 [2018-10-16 13:00:00]
rlm_counter: add_defaults: Start
rlm_counter: DEFAULT1 set to 0
rlm_counter: DEFAULT2 set to 1539681453
rlm_counter: add_defaults: End
  }
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/usr/local/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/server_key.pem"
        certificate_file = "/usr/local/etc/raddb/certs/server_cert.pem"
        ca_file = "/usr/local/etc/raddb/certs/ca_cert.pem"
        dh_file = "/usr/local/etc/raddb/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
        tls_max_version = ""
        tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = no
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel-ttls"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel-peap"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"  found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"     found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading pre-proxy {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel-peap { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel-peap
server inner-tunnel-ttls { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel-ttls
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 192.168.2.1
        port = 1812
}
listen {
        type = "auth"
        ipaddr = 192.168.4.1
        port = 1812
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18128
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18127
}
Listening on auth address 192.168.2.1 port 1812 bound to server default
Listening on auth address 192.168.4.1 port 1812 bound to server default
Listening on auth address 127.0.0.1 port 18128 bound to server inner-tunnel-peap
Listening on auth address 127.0.0.1 port 18127 bound to server inner-tunnel-ttls
Ready to process requests

                      After executing this command radius server starts automatically, but if I stop and start or restart it again, it doesn't start.

                      Elvin

                      S 1 Reply Last reply Reply Quote 0
                      • S
                        strangegopher @emammadov
                        last edited by

                        @emammadov said in FreeRadius server not starting in 2.4.4:

                        Ready to process requests

                        that message indicates that the server is working just fine.

                        for some reason when you restart the server, it is already running (bound to the port).

                        1 Reply Last reply Reply Quote 0
                        • emammadovE
                          emammadov
                          last edited by

                          Though when executing this command radius server starts automatically, after a while it stops itself.

                          Elvin

                          1 Reply Last reply Reply Quote 0
                          • S
                            strangegopher
                            last edited by

                            oh, did u leave the ssh running after executing the command?
                            radiusd -X just runs radius in debug mode in foreground. and it exists as soon as you close the ssh window.
                            it is not the solution to your problem, just a way to figure out what is going on here.
                            Check Diagnostics > Sockets and it will show 192.168.2.1:1812 and 192.168.4.1:1812 running even if radius shows up as stopped on services page. Strange, but maybe someone with better knowledge knows why it is not restarting properly.

                            But now that you mention it stopping all of a sudden, indicates that it is also crashing, again you would need to look at logs to know exactly why it is crashing.

                            1 Reply Last reply Reply Quote 0
                            • emammadovE
                              emammadov
                              last edited by emammadov

                              I looked at Check Diagnostics > Sockets and there is no 192.168.2.1:1812 and 192.168.4.1:1812 running. Currently radius stopped automatically. I started Radius with executing radiusd -X again, now I see these entries in Socket.

                              oot radiusd 64486 12 udp4 192.168.2.1:1812 :
                              root radiusd 64486 13 udp4 192.168.4.1:1812 :
                              root radiusd 64486 14 udp4 127.0.0.1:18128 :
                              root radiusd 64486 15 udp4 127.0.0.1:18127 :
                              root sshd 31260 3 tcp4 192.168.2.1:33426 192.168.4.10:7792

                              Elvin

                              S 1 Reply Last reply Reply Quote 0
                              • S
                                strangegopher @emammadov
                                last edited by strangegopher

                                @emammadov okay so when you try to start it, it works but it just stops automatically? can you check Status > System Logs for any radius messages? or if you have it logging to /var/log/radius.log can you do this in ssh:
                                cat /var/log/radius.log to see messages when the program exists.

                                don't use radiusd -X to start freeradius, do it in Status > Services page.

                                1 Reply Last reply Reply Quote 0
                                • emammadovE
                                  emammadov
                                  last edited by

                                  I run cat /var/log/radius.log, but there is no log entries inside this file. There is no logs in System Logs either.

                                  CLOG▒!▒▒[2.4.4-RELEASE][admin@pfsense.smart.az]/var/log: cat radius.log
[2.4.4-RELEASE][admin@pfsense.smart.az]/var/log:

                                  Elvin

                                  S 1 Reply Last reply Reply Quote 0
                                  • S
                                    strangegopher @emammadov
                                    last edited by

                                    @emammadov Go into Services > FreeRADIUS > Settings
                                    Select "RADIUS Logging Destination" to /var/log/radius.log and set "RADIUS Logging" to enable and then hit save.
                                    Go to Status > Services and try to start freeradius again.
                                    Check the log file again.

                                    1 Reply Last reply Reply Quote 0
                                    • emammadovE
                                      emammadov
                                      last edited by

                                      I did as you said, but there is no logs in that file again.

                                      0_1539687630486_1.jpg
                                      0_1539687634894_2.jpg

                                      Elvin

                                      1 Reply Last reply Reply Quote 0
                                      • S
                                        strangegopher
                                        last edited by

                                        it seems freeradius is working fine in debug mode but something is preventing freeradius from starting normally. Can you try restarting pfsense and check if it makes any logs?

                                        1 Reply Last reply Reply Quote 0
                                        • emammadovE
                                          emammadov
                                          last edited by

                                          I will restart pfsense after work tonight, because there are many employees working now at our company.

                                          Elvin

                                          1 Reply Last reply Reply Quote 0
                                          • emammadovE
                                            emammadov
                                            last edited by

                                            Removed freeradius, restarted pfsense and then reinstall freeradius, it began to work. Thank you very much,

                                            Elvin

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.