IPSec tunnel - No traffic

[bpados]

There is no traffic on the IPSec interface but I do see the echo request on the WAN.

Steve, I have to assume you're the same fellow who helped me out a few times before netgate time. Then netgate took over and my support didn't get carried over to netgate at least that's what it seems. Anyways thank you for the attention now on this matter.

[stephenw10]

I could be. Though I have only ever worked for Netgate doing pfSense support (while getting paid!).

If you're seeing the unencrypted ping request leaving the WAN then the IPSec daemon is not seeing that as interesting traffic.

Check in Status > IPSec on the SPDs tab that the traffic selectors are there covering the source and destinations you are pinging.

Steve

[bpados]

SPD tabs show both remote and local networks for inbound and outbound.

[stephenw10]

Hmm, can we see the output of ipsec statusall and the details of the ping that's failing?

Steve

[e066377]

I have a similar problem with pfSense 2.4.4.

LAN interface stops routing traffic, tunnels stop working after some minutes or sometimes hours

I have multiple Phase 2 tunnels, if i restart a computer in local network or restart IPsec service multiple times and try to ping tunnel remote IP then tunnels start to get packets but after a while traffic stops again.

People had the same problem before : https://forum.netgate.com/topic/98893/pfsense-2-3-lan-interface-stops-routing-traffic-stops-working-after-2-or-3-day

And it was fixed with 2.3.1, i think it was a solution by disabling all but 1 CPU. May it be the same?

[stephenw10]

If it works at all on upgraded devices then you have a different issue. Please start a new thread to address that.

Steve

[bpados]

Sorry. Still having this issue I'll try to get some ipsec status printed out this week. It's been busy.
Thank you.

[stephenw10]

Just to confirm; the traffic counters on the phase 2 status shows 0 at both ends and in both directions?

Steve

[bpados]

You just pointed out to something I never paid attention to.
In lack of time I looked at one of the setups and Connection is established but phase to status is not available on the connection that's not working.

[stephenw10]

Ah, phase 1 comes up but not phase 2? Then check for a mismatch there. The IPSec logs should show an error.

Steve

[Markadaca]

No intention of hijacking the thread.
I'm using 2.4.4-RELEASE (amd64)
built on Thu Sep 20 09:33:19 EDT 2018
FreeBSD 11.2-RELEASE-p3

I create an ipSec tunnel with identical configuration of others created on a previous rev (2.4.3p1) and the tunnel itself establishes, but no traffic passes through. On the phase 2 items, they're configured in a fashion similar to the other working tunnels. One thing I noticed that was very strange. In Static -> IPsec -> SADs, the whole section on this 2.4.4 instance is EMPTY, but on the others, it's populated with two entries per phase 2 item.

[stephenw10]

The SADs will only appear once the tunnel is up. The SPDs should be be there whether it is up or not though.

If you see no SADs it's not establishing. Check the ipsec logs.

Steve

[Markadaca]

con2000: #3 toOffice pu.bl.ic.ip 10.xx.xx.xx NAT-T re.mo.te.ip re.mo.te.ip IKEv2
initiator 23725 seconds (06:35:25) AES_CBC
HMAC_SHA1_96
PRF_HMAC_SHA1
MODP_1024 ESTABLISHED
4026 seconds (01:07:06) ago

Status shows as "ESTABLISHED" for the main tunnel.

log snippet:
Nov 8 18:28:26 charon 09[NET] <con2000|3> received packet: from re.mo.te.ip[4500] to 10.xx.xx.1[4500] (76 bytes)
Nov 8 18:28:26 charon 09[ENC] <con2000|3> parsed INFORMATIONAL request 252 [ ]
Nov 8 18:28:26 charon 09[ENC] <con2000|3> generating INFORMATIONAL response 252 [ ]
Nov 8 18:28:26 charon 09[NET] <con2000|3> sending packet: from 10.xx.xx.1[4500] to re.mo.te.ip[4500] (76 bytes)
Nov 8 18:28:30 charon 12[CFG] vici client 574 connected
Nov 8 18:28:30 charon 16[CFG] vici client 574 registered for: list-sa
Nov 8 18:28:30 charon 16[CFG] vici client 574 requests: list-sas
Nov 8 18:28:30 charon 16[CFG] vici client 574 disconnected

[Derelict]

You want to look for log messages detailing bringing up the ESP inner tunnels based on the traffic selectors.

[Markadaca]

@derelict How do I do that? I'm in Status -> System Logs -> System -> General
what would I filter by?

[stephenw10]

Look on the IPSec tab there. Errors will likely be evident just by reading it unless you have a few IPSec tunnels in which case they may be lost in the logging from that. Try restarting the problem tunnel and then immediately checking the IPSec log again.

Look for phase 2 issues such as those shown here:
https://www.netgate.com/docs/pfsense/vpn/ipsec/ipsec-troubleshooting.html#phase-2-network-mismatch

Steve

[Markadaca]

Thanks, it was a phase 2 no acceptable ENCRYPTION_ALGORITHM found message
Mismatched AES128 on one side and AES256 on the other.

Sorry for the thread-jack, I'll go away now.

[bpados]

I'm not seeing phase2 related errors.

[Derelict]

That is all dead peer detection.

Your Phase 2 looks like it is coming up.

Obfuscating the private addresses makes it almost impossible to help you. Nobody cares what your private addresses are.

[bpados]

Phase 2 been coming up for weeks now.