PFsense hanging since version 2.4.4

[chrismacmahon]

How old is the system?

[Taz79]

@chrismacmahon said in PFsense hanging since version 2.4.4:

How old is the system?

It's from 1st of April 2017 so not very old..

It is ordered from Aliexpress.com though...........

[Taz79]

Computer hanged again.. After 1day and 8 hours. I will update to 2.4.4 p2 and if it hangs again i will connect it to another PSU to test one thing each time.. Will let you know in here to help out others maybe :)

[chrismacmahon]

It sounds like it's hardware.

I'm not in your shoes, but chasing hardware faults is difficult at best sometimes.

When I had this happen 10 years ago, in my home, my wife insisted i fix it.... I ended up buying new hardware as that was the fastest path to resolution. Good luck!

[Taz79]

It hung again. So now im running on another PSU. Also running a memtest now with Memtest86+... Will keep you updated... :) When it hung the console screen were just frozen and no special messages.

If it freezes again next step is to run it from USB stick i guess...
If it frezes then i will test older releases of pfsense.

[chrismacmahon]

This is a hardware fault.

If you have another device to swap out I would do so, or if you can run a VM to test I would.

[Taz79]

@chrismacmahon said in PFsense hanging since version 2.4.4:

This is a hardware fault.

If you have another device to swap out I would do so, or if you can run a VM to test I would.

A VM to test what exactly? A VM of my current installation?

The router hanged again an hour ago. Im now making a USB stick to try to run my config from it if possible... Live.

[chrismacmahon]

If you have the hardware to spin up a virtual machine, you can import your working config into the VM and run off of that.

[Taz79]

@chrismacmahon said in PFsense hanging since version 2.4.4:

If you have the hardware to spin up a virtual machine, you can import your working config into the VM and run off of that.

ok.. i dont have a ESXi machine at home.. but at work.. i will try to reinstall 2.4.4.. on the computer first.. or run 2.3 if that failes.

[Taz79]

i tried to create a USB stick with 2.4.4 p1 but after installing i get into that crappy serial console bug.. i pressed ESC to type "set kern.vty=sc" but then booting into multi user mode i seem to get a crash.. text scrolls by too fast for me to read.. so after ESC i want to boot into single user mode to be able to see the boot errors.. but how do i boot from CLI (ESC) into single user mode.. i have tried to google for it but cannot find anything... i tried like boot single and such without success.. please help!

I really wanted to try 2.4.4 before i go back and try 2.3 or something that might work better...

[chrismacmahon]

Not sure, I would re-burn the image, try again...if it happens again the hardware issue is the problem.

We are a fan of Etcher.io

[Taz79]

Found it... "boot -s" it is :) .. Will try it and review the logs.

[Taz79]

Had to run fsck -y a few times due to unclean system because i did a power off because of the display issue in 2.4.4.. i did not realize the system would start up anyway..

So now the system is up .. 2.4.4 p1 with basic settings.. Nothing changed except password.. will let it run like that to see what happens.. if it hangs again i will try to go back to an old version where i know it was working... to rule out software too...

Is there anyone that has an older image available? 2.4 or 2.4.1 or 2.4.2? that i could have to test?

[Taz79]

Another thing... i found this...

Intel Atom systems containing HD Graphics chipsets similar to the Z3700 may experience console problems after the update. Affected systems will boot successfully, but fail to display console output after the boot menu. To fix the problem, add the following lines to /boot/loader.conf.local:

i915kms_load="YES"
drm.i915.enable_unsupported=1
Systems with similar console problems not containing a graphics chip supported by the i915 driver may need to reinstall 2.4.4 to use a UEFI console.

Alternately, try using the syscons console instead of VT in /boot/loader.conf.local:

kern.vty=sc

I have been using kern.vty=sc.. but i see i can enter the other stuff instead... Could this be a source of my problems i have had? I'm running Atom with Z36xx or Z37xx gfx chip..

Here is pciconf -lv output of my system:

code
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pciconf -lv
hostb0@pci0:0:0:0:      class=0x060000 card=0x0f318086 chip=0x0f008086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 card=0x0f318086 chip=0x0f318086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display'
    class      = display
    subclass   = VGA
ahci0@pci0:0:19:0:      class=0x010601 card=0x0f238086 chip=0x0f238086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
xhci0@pci0:0:20:0:      class=0x0c0330 card=0x0f358086 chip=0x0f358086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI'
    class      = serial bus
    subclass   = USB
none0@pci0:0:26:0:      class=0x108000 card=0x0f188086 chip=0x0f188086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine'
    class      = encrypt/decrypt
hdac0@pci0:0:27:0:      class=0x040300 card=0x0f048086 chip=0x0f048086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:      class=0x060400 card=0x0f488086 chip=0x0f488086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:      class=0x060400 card=0x0f4a8086 chip=0x0f4a8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:2:      class=0x060400 card=0x0f4c8086 chip=0x0f4c8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:      class=0x060400 card=0x0f4e8086 chip=0x0f4e8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x0f1c8086 chip=0x0f1c8086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Power Control Unit'
    class      = bridge
    subclass   = PCI-ISA
none1@pci0:0:31:3:      class=0x0c0500 card=0x0f128086 chip=0x0f128086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SMBus Controller'
    class      = serial bus
    subclass   = SMBus
igb0@pci0:1:0:0:        class=0x020000 card=0x00008086 chip=0x15398086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'I211 Gigabit Network Connection'
    class      = network
    subclass   = ethernet
igb1@pci0:2:0:0:        class=0x020000 card=0x00008086 chip=0x15398086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'I211 Gigabit Network Connection'
    class      = network
    subclass   = ethernet
igb2@pci0:3:0:0:        class=0x020000 card=0x00008086 chip=0x15398086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'I211 Gigabit Network Connection'
    class      = network
    subclass   = ethernet
igb3@pci0:4:0:0:        class=0x020000 card=0x00008086 chip=0x15398086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'I211 Gigabit Network Connection'
    class      = network
    subclass   = ethernet

[Taz79]

Ok.. i entered:
i915kms_load="YES"
drm.i915.enable_unsupported=1

Into /boot/loader.conf.local

I now have much smaller text on the monitor connected to the system (VGA) when i boot the system than i have had before.. Maybe this could have been the issue why i had system freeze? .. I will run with the default config for 2 days... if no freeze i will load my config into the system and see if everything works as it should....

[Taz79]

This looks promising.. I really hope this was the issue.. seems like it though... Uptime of 2 days and 6 hours now.. I will let it run until 3 days then i will apply my own config..

[Gertjan]

While you're applying, switch to p3.

[Taz79]

@gertjan said in PFsense hanging since version 2.4.4:

While you're applying, switch to p3.

That one seems not to be available.. At least not in the stable brand. Is there some improvements for the problems im having?

[Taz79]

Ok. I think i found the problem. The problem were infact not Hardware fault but it was software "fault" related to the 2.4.4 releases.

When installing 2.4.4 the bootup changed to console display instead of VGA display. To fix that i found articles that i should add:
kern.vty=sc
To my /boot/loader.conf.local
But that seemed to have caused the system freezes i have had.

I now found another article that i should add the following to /boot/loader.conf.local
i915kms_load="YES"
drm.i915.enable_unsupported=1

THAT solved my problems it seems like!

I still have to apply my original config though to verify. I will do that now.. System has now been running fine for 4.5 days.

[Gertjan]

@taz79 said in PFsense hanging since version 2.4.4:

That one seems not to be available.

You're right : it should be p2 - sorry.