Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] Cannot access 2 switches on LAN from VLAN.

    Scheduled Pinned Locked Moved General pfSense Questions
    18 Posts 5 Posters 1.4k Views 4 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DerelictD Offline
      Derelict LAYER 8 Netgate
      last edited by

      Remove the gateway from the two rules that pass traffic to 192.168.18.2 and 192.168.18.3. You don't want that traffic to go out the WANs do you?

      Probably the one sending traffic to the firewall too.

      Chattanooga, Tennessee, USA
      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
      Do Not Chat For Help! NO_WAN_EGRESS(TM)

      pfrickrollP 1 Reply Last reply Reply Quote 1
      • pfrickrollP Offline
        pfrickroll @Derelict
        last edited by pfrickroll

        @Derelict said in Cannot access 2 switches on LAN from VLAN.:

        Remove the gateway from the two rules that pass traffic to 192.168.18.2 and 192.168.18.3. You don't want that traffic to go out the WANs do you?

        Probably the one sending traffic to the firewall too.

        The "default" gateway is LAN gateway 192.168.18.1 (pfSsense?)
        Capture.PNG

        GrimsonG 1 Reply Last reply Reply Quote 0
        • GrimsonG Offline
          Grimson Banned @pfrickroll
          last edited by

          @pfrickroll said in Cannot access 2 switches on LAN from VLAN.:

          The "default" gateway is LAN gateway 192.168.18.1 (pfSsense?)
          Capture.PNG

          I hope you didn't add a useless gateway to your LAN. As for what "default" means in the rule settings, it's written right there.

          Leave as 'default' to use the system routing table.

          You just need to actually read it.

          pfrickrollP 1 Reply Last reply Reply Quote 1
          • pfrickrollP Offline
            pfrickroll @Grimson
            last edited by

            @Grimson

            What do you mean by useless? pfsense gateway is 192.168.18.1
            I am not an expert in terms of a lot networking concepts there are some details or terms I have yet to fully grasp.

            GrimsonG 1 Reply Last reply Reply Quote 0
            • DerelictD Offline
              Derelict LAYER 8 Netgate
              last edited by

              You have a gateway set on your firewall rules, man. That completely bypasses the routing table, including the default gateway.

              https://www.netgate.com/docs/pfsense/routing/bypassing-policy-routing.html

              Chattanooga, Tennessee, USA
              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
              Do Not Chat For Help! NO_WAN_EGRESS(TM)

              pfrickrollP 1 Reply Last reply Reply Quote 1
              • pfrickrollP Offline
                pfrickroll @Derelict
                last edited by

                @Derelict said in Cannot access 2 switches on LAN from VLAN.:

                You have a gateway set on your firewall rules, man. That completely bypasses the routing table, including the default gateway.

                https://www.netgate.com/docs/pfsense/routing/bypassing-policy-routing.html

                Ok, it makes sense to me but how it applies if I am blocking?
                Like i have those 3 rules set, should gateway also be "default?

                1 Reply Last reply Reply Quote 0
                • DerelictD Offline
                  Derelict LAYER 8 Netgate
                  last edited by

                  What? You are passing not blocking. Block rules don't forward traffic anywhere.

                  Chattanooga, Tennessee, USA
                  A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                  DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                  Do Not Chat For Help! NO_WAN_EGRESS(TM)

                  1 Reply Last reply Reply Quote 0
                  • GrimsonG Offline
                    Grimson Banned @pfrickroll
                    last edited by

                    @pfrickroll said in Cannot access 2 switches on LAN from VLAN.:

                    I am not an expert in terms of a lot networking concepts there are some details or terms I have yet to fully grasp.

                    Then learn them, routing is a basic topic when it comes to networking.

                    Here: https://forum.netgate.com/topic/138695/how-would-you-go-about-managing-24-pfsense-boxes it seems you are tasked with managing the network of multiple sites for a company. If you want to do this you need to know the basics in and out or you are the wrong person for a job like this.

                    1 Reply Last reply Reply Quote 0
                    • pfrickrollP Offline
                      pfrickroll
                      last edited by

                      So, Block rules don't care what gateway is there, all traffic is blocked no matter what?

                      DerelictD 1 Reply Last reply Reply Quote 0
                      • DerelictD Offline
                        Derelict LAYER 8 Netgate
                        last edited by

                        Screen Shot 2019-03-26 at 1.30.02 PM.png

                        You are forcing that traffic out your WANs.

                        Chattanooga, Tennessee, USA
                        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                        Do Not Chat For Help! NO_WAN_EGRESS(TM)

                        1 Reply Last reply Reply Quote 0
                        • DerelictD Offline
                          Derelict LAYER 8 Netgate @pfrickroll
                          last edited by

                          @pfrickroll Setting a gateway on a block rule is nonsense. The traffic is blocked so there is nothing to forward.

                          Chattanooga, Tennessee, USA
                          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                          Do Not Chat For Help! NO_WAN_EGRESS(TM)

                          1 Reply Last reply Reply Quote 0
                          • pfrickrollP Offline
                            pfrickroll
                            last edited by

                            Capture.PNG

                            1 Reply Last reply Reply Quote 0
                            • DerelictD Offline
                              Derelict LAYER 8 Netgate
                              last edited by

                              Great. Now you can access your switches.

                              Chattanooga, Tennessee, USA
                              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                              Do Not Chat For Help! NO_WAN_EGRESS(TM)

                              1 Reply Last reply Reply Quote 1
                              • First post
                                Last post
                              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.