Thermals Sensores not working in 2.4.4-p3

[hugoeyng]

In System > Advanced > Misselanious

But in Dashboard it stays "Updating.."

I changed an saved again many times, but doesn´t work.

[jimp]

It's possible your chip isn't supported, thus it has no values to return.

Do you see anything in sysctl -a | grep temperature ? Anything in the main system log from amdtemp?

[hugoeyng]

@jimp said in Thermals Sensores not working in 2.4.4-p3:

sysctl -a | grep temperature

I see nothing from sysctl -a | grep temperature

Anything in the main system log from amdtemp?
Nothing

[kiokoman]

check if the module is loaded

kldload amdtemp

[jimp]

If it is loaded then your specific sensor chip is not supported by the module.

[hugoeyng]

@kiokoman said in Thermals Sensores not working in 2.4.4-p3:

check if the module is loaded

Where can I check it?

[jimp]

Run kldstat

[kiokoman]

execute
kldstat
if you don't see amdtemp.ko in the list
execute
kldload amdtemp

if it's already there than "your specific sensor chip is not supported by the module."

[hugoeyng]

@kiokoman said in Thermals Sensores not working in 2.4.4-p3:

kldstat

I am afraid that "your specific sensor chip is not supported by the module." :)

[stephenw10]

If it matters that much you could try a 2.5 snapshot. That has a number of 17h related additions over 2.4.4.

Steve

[hugoeyng]

@stephenw10 Thank you for the answer. Actually it doesn´t matter enough to assume the risk. I will wait for a new stable release.

[hugoeyng]

Version 2.4.5