PFsense mini computer and battery/powerbank questions.
-
I want to run www.speedify.com Is a software that combines and merge multiple ISP connections and also provides VPN. It works so well for what i'm doing so it has to be that software.
https://www.connectify.me/ is the same company but i was told by their support that i could share the enhanced VPN speedify connection to multiple devices through the Connectify software. That's is why i'm looking for a mini pc with a lot of ethernet ports, so i can share the result of the speedify connection to all the routers of my home.
Forget about the unrelated software, i could run it in another device. It doesn't have to be that one, i just need that device to be 24/7 on all the time. Both speedify and connectify won't loan that much of CPU.
-
So not pfSense at all?
15W is the thermal design power of the CPU only on that device. The actual power requirement of the complete system will vary based on the CPU loading.
But... if it is 15W total you need a 30Wh battery to power it for 2hrs.
Steve
-
@stephenw10
15W TDP is heat dissipation of the CPU. It's not power drawn. And that's only for the CPU, all the other components onboard are missing from that equation. -
@logart said in PFsense mini computer and battery/powerbank questions.:
i'm looking for a mini pc with a lot of ethernet ports, so i can share the result of the speedify connection to all the routers of my home.
??? How many routers do you have in one home?
These lots of ethernet ports on a router are router ports, NOT switch ports. Use a switch to distribute ethernet in your home. -
Ok I am confused - your not going to be running this software on pfsense.. So why is your question in pfsense hardware... This should just be moved to general section, cuz for the life of me don't see how this has anything to do with pfsense, or any pfsense hardware.. Are you thinking of using some netgate hardware to run whatever this software is on?
edit: So you want to buy some Qotom-Q550G6-I5-6200U, that is not netgate hardware.. So why are you not their boards if you want to know how much power it draws?
-
OP has an idea but no clue how to accomplish that.
We can either smack on his forehead and tell him to ask elsewhere or we guide him to a working solution, probably with pfSense on netgate hardware.
I opt for the latter... -
He is not going to run that software on pfsense ;) He could run it on some netgate hardware sure..
edit: Moving this to General... This has zero to do with pfsense hardware.
What I would do to figure out your powerbank needs is actuall measure the power the device uses - get yourself a little killawatt meter.. Great little device to have in your toolbelt - like 20$.. Run the device for a few days under different load conditions and then see how much power it used..
Then do some math for what kind of ups you would need to keep it running for X hours..
-
the *ify.com software runs on "a PC [aka Windows] or MAC, iOS and Android".
I wouldn't run that on netgate hardware but would do so with the main router/firewall. -
@logart said in PFsense mini computer and battery/powerbank questions.:
combines and merge multiple ISP connections and also provides VPN
You do understand that anything running pfsense can do this right.. Pfsense can load share across multiple isp connections, and provides vpn server, etc. etc..
-
Let me explain myself better. I don't need lots of ethernet ports. I just need to find the lowest power consumption as possible device that can run windows enterprise to run these two softwares. I need either 2 ethernet ports and wifi or 3 ethernet ports. And a battery in case of power outrage.
I posted this here because i thought you guy might know. the PFsense mini computers that are sold in amazon looks good for what i want. I just need a battery backup for the computer itself that would allow me to keep powering the device for at least two hours. The device has to be on 24/7.
I need 1 ethernet port to distribute it to a switcher to all my routers in my home.
-
@logart said in PFsense mini computer and battery/powerbank questions.:
the PFsense mini computers that are sold in amazon looks good for what i want.
Those have nothing to do with pfSense, they are cheap (in every way) hardware where the seller misuses the pfSense brand to up his sales. You will not find much love/support for them here.
-
You can run windows on a PI, the new PI 4's have little power use, and just use a switch to create more interfaces to connect to your box.. cheap vlan switch (40ish) Pi 4 kit say 100ish... Your looking like 150$ gets you a pc to run your windows on.. And 8 ports to work with..
You could run a switch and a pi for day prob on the cheapest of ups I would bet ;)
-
@Grimson said in PFsense mini computer and battery/powerbank questions.:
@logart said in PFsense mini computer and battery/powerbank questions.:
the PFsense mini computers that are sold in amazon looks good for what i want.
Those have nothing to do with pfSense, they are cheap (in every way) hardware where the seller misuses the pfSense brand to up his sales. You will not find much love/support for them here.
I didn't even know... i just need to figure out which kind of hardware i need? I was hoping if i could get some technical wisdom or guidance.
-
Why are you stuck on this software -- again pfsense can use multiple ISPs for its wan, and share load across them for your clients behind..
Something like a sg1100 for $149 would most likely work, and then vlan capable switch and you would be cooking with gas ;) Very little power use..
-
@johnpoz said in PFsense mini computer and battery/powerbank questions.:
You can run windows on a PI, the new PI 4's have little power use, and just use a switch to create more interfaces to connect to your box.. cheap vlan switch (40ish) Pi 4 kit say 100ish... Your looking like 150$ gets you a pc to run your windows on.. And 8 ports to work with..
You could run a switch and a pi for day prob on the cheapest of ups I would bet ;)
And what kind of battery should i buy for the pi?
-
@johnpoz said in PFsense mini computer and battery/powerbank questions.:
sg1100
It has to be the software i have :( I'm in love with it and I'm paying 50$ a year for it.
-
You would buy a ups... Do a google for how much pi4 draws.. Sure there is plenty of info about it.. if not now real soon.. Since they just hit the streets and people posting all kinds of info for them..
Something like a 1350 ups with 50w would give you a run time of over 2 hours for sure... Pi and switch not going to draw half of that... A sg1100 shows it draws 3.48W (Idle), lets say 5 for your switch puts you less than 10w so a 1350 UPS would give you easy hours and hours and hours over your 2 hour requirement.. Look for a ups runtime calc - apc has one, cyberpower has one and wills how you graph at estimated runtime for specific load.
-
@logart said in PFsense mini computer and battery/powerbank questions.:
I'm paying 50$ a year for it.
Pfsense is FREE.. So in 3 years you would pay for the sg1100 ;)
-
@johnpoz said in PFsense mini computer and battery/powerbank questions.:
@logart said in PFsense mini computer and battery/powerbank questions.:
I'm paying 50$ a year for it.
Pfsense is FREE.. So in 3 years you would pay for the sg1100 ;)
But my software is giving me a VPN for that price a year. PFsense VPN is free?
-
@johnpoz said in PFsense mini computer and battery/powerbank questions.:
You would buy a ups... Do a google for how much pi4 draws.. Sure there is plenty of info about it.. if not now real soon.. Since they just hit the streets and people posting all kinds of info for them..
Something like a 1350 ups with 50w would give you a run time of over 2 hours for sure... Pi and switch not going to draw half of that... A sg1100 shows it draws 3.48W (Idle), lets say 5 for your switch puts you less than 10w so a 1350 UPS would give you easy hours and hours and hours over your 2 hour requirement.. Look for a ups runtime calc - apc has one, cyberpower has one and wills how you graph at estimated runtime for specific load.
Funny thing is that i already have a cyberpower 1500VA, i have my 2 ISP modems connected to it. How much do you think it will last with two modems, and the raspbery PI 4 and a switch?
Edit: Also the pi can run windows enterprise or just windows IoT?
