Setting up IPsec VPN pfsense to dsr dlink-1000 router
-
no, you opened port from 1 to 500 for outgoing and from 1 to 4500 for incoming
i don't known the dlink but you probably need 2 rules
udp
Outgoing
start port 500
to 500Incoming
start port 500
to 500another rules with
udp
outgoing
start port 4500
to 4500
incoming
start port 4500
to 4500check if you have the latest firmware for the dlink
-
@kiokoman I already done that but it didnt help that's why i go crazy wait hang on lemme change it. and for the firmware its already up to date sadly :(
-
2.13 ?
https://tsd.dlink.com.tw/downloads2008.asp -
nope.
-
@kiokoman oh no it appears that I can upgrade the firmware up to 3.14
-
ok but i think the rules are on the wrong interface, it shoul be WAN not LAN
-
@kiokoman yes I agree on that but my only options are LAN and DMZ. damn this DSR is really a pain in the ass.
-
-
i've read the manual and saw some video on youtube, it seems that there is no need to open the port
https://eu.dlink.com/uk/en/support/faq/routers/wireless-routers/dsr-series/uk_dsr_how_to_setup_vpn_ipsec_between_dsr_series
https://www.youtube.com/watch?v=fppUQfmtNt8what i would suggest at this point is to upgrade the firmware, completely reset /hard reset the router and start over
-
@kiokoman thank you so much! I've upgraded the router to the latest version. I will try to factory default this and start over.
-
And probably about time to ask on the D-Link forums instead of here.
