locked out - reset not working - SG3100
-
i pressed the reset button at boot but the dhcp address i get is not 192.168.1.X but something like 169.254.29.154 with a subnet 255.255.0.0 - I have no idea where this address comes from. I tried all the ports but same result.
all 3 lights on the appliance are blinking and glowing at identical pace like a fast heart beat
how can i access the webgui?
-
If the status lights are blinking fast that means the firewall has not fully booted. Do they stop blinking an then start again around once every 30s? That implies a boot loop of some sort.
You need to connect to the serial console so see what is happening:
https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/connect-to-console.htmlI would open a ticket with us for more direct assistance if it's not obvious from the console output that the problem is:
https://go.netgate.comSteve
-
@vladanpopovic said in locked out - reset not working - SG3100:
address i get is not 192.168.1.X but something like 169.254.29.154 with a subnet 255.255.0.0 - I have no idea where this address comes from.
The DHCP client running on your device (PC, Phone, laptop, whatever) will auto-assign itself an 169.254.0.0/16 after a certain time-out : when no DHCP is answering its request for an IP/DNS/Gateway..