Can't get to login.microsoft.com

provels

Can you traceroute (or tracert in Windows) to login.microsoft.com? Could be an ISP or backbone issue.

dcihon

C:\WINDOWS\system32>tracert login.microsoft.com

Tracing route to san.current.a.prd.aadg.akadns.net [40.126.0.70]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms pfsense.eaglestl.com [192.168.1.1]
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

stephenw10

Ok, so the client also resolves it but that cannot reach it.
By default the DNS resolver should be enabled and pfSense will hand it's internal interface IP to client to use for DNS.

Does pfSense also fail when trying to traceroute at every step like that?

If so it's either blocked somewhere upstream or you have a bad route somewhere.
Check Diag > Routes, do you have any subnets defined containing that IP?

Steve

Gertjan

Probably an upstream router that blocks all ICMP requests.
That explains the total absence of replies.

dcihon

This is what I get when I do a tracert from pfsense.
1 * * *
2 * *traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*
3 traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*
4 traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*traceroute: wrote www.tm.a.prd.aadg.trafficmanager.net 40 chars, ret=-1
*

This is from the routing table.

code_textdefault	47.47.60.89	UGS	66550	1500	bce0	
40.0.0.0/5	link#3	U	2827313	1500	bce1	
40.139.91.18	link#3	UHS	0	16384	lo0	
47.47.60.88/29	link#1	U	2593273	1500	bce0	
47.47.60.90	link#1	UHS	0	16384	lo0	
66.148.187.136/29	link#3	U	2603986	1500	bce1	
66.148.187.139	link#3	UHS	0	16384	lo0	
66.148.187.139/32	link#3	U	0	1500	bce1	
66.148.187.140	link#3	UHS	0	16384	lo0	
127.0.0.1	link#7	UH	604	16384	lo0	
172.16.1.0/24	192.168.1.5	UGS	0	1500	re0	
192.168.1.0/24	link#2	U	37862400	1500	re0	
192.168.1.1	link#2	UHS	0	16384	lo0	
208.67.220.220	47.47.60.89	UGHS	16413	1500	bce0	
208.67.222.222	47.47.60.89	UGHS	16530	1500	bce0	
IPv6 Routes
Destination	Gateway	Flags	Use	Mtu	Netif	Expire
::1	link#7	UH	0	16384	lo0	
fe80::%bce0/64	link#1	U	0	1500	bce0	
fe80::219:b9ff:fede:bb5d%bce0	link#1	UHS	0	16384	lo0	
fe80::%re0/64	link#2	U	0	1500	re0	
fe80::ca3a:35ff:fede:f20d%re0	link#2	UHS	0	16384	lo0	
fe80::%bce1/64	link#3	U	0	1500	bce1	
fe80::219:b9ff:fede:bb5b%bce1	link#3	UHS	0	16384	lo0	
fe80::%lo0/64	link#7	U	0	16384	lo0	
fe80::1%lo0	link#7	UHS	0	16384	lo0	
ff01::%bce0/32	fe80::219:b9ff:fede:bb5d%bce0	U	0	1500	bce0	
ff01::%re0/32	fe80::ca3a:35ff:fede:f20d%re0	U	0	1500	re0	
ff01::%bce1/32	fe80::219:b9ff:fede:bb5b%bce1	U	0	1500	bce1	
ff01::%lo0/32	::1	U	0	16384	lo0	
ff02::%bce0/32	fe80::219:b9ff:fede:bb5d%bce0	U	0	1500	bce0	
ff02::%re0/32	fe80::ca3a:35ff:fede:f20d%re0	U	0	1500	re0	
ff02::%bce1/32	fe80::219:b9ff:fede:bb5b%bce1	U	0	1500	bce1	
ff02::%lo0/32	::1	U	0	16384	lo0	

pfSense is © 2004 - 2019 by Rubicon Communications, LLC (Netgate). All Rights Reserved. [view license]

johnpoz

@dcihon said in Can't get to login.microsoft.com:

C:\WINDOWS\system32>tracert login.microsoft.com
Tracing route to san.current.a.prd.aadg.akadns.net [40.126.0.70]

So notice the 40.126 address... Now notice his routing table...

40.0.0.0/5	link#3	U	2827313	1500	bce1

No shit he can not get there ;)

I take it there is a shit ton of stuff he can not get to - and this is just 1 has noticed.

40.0.0.0 - 47.255.255.255

That is a LOT Of addresses... He thinks are directly attacked to his link#3 ;)

Someone has a typo on their mask would be my guess.

dcihon

So can you give me some help on how to fix this?
Where do I go in pfsense to change it so it doesn't route there or whatever I should do to fix this.

Gertjan

@dcihon said in Can't get to login.microsoft.com:

So can you give me some help on how to fix this?

What is your WAN IP / LAN IP ?
WAN is static ? DHCP ?

johnpoz

Looks like maybe someone pulled some IP range out of their you know what and said lets use this..

What network is connected to bce1?

Looks like the default route is on that /29 network on bce0

dcihon

My WAN IP is : 47.47.60.90
There are 2 internet connections at this office .
Lan IP is 192.168.1.60
WAN is static.
DHCP coming from pfsense LAN interface.

Gertjan

More info about this one :
@dcihon said in Can't get to login.microsoft.com:

My WAN IP is : 47.47.60.90

Where did it came from ? Mask ?

( @johnpoz : let's get ready for the ROFL )

dcihon

Not sure how to answer these questions.
Does this help.
Windstream WINDSTREAMWAN 66.148.187.137 66.148.187.137 Windstream Gateway
WSvlan1GWE LAN 192.168.1.5 192.168.1.5 vlan1 IP on WS Router
WindstreamWANGW WINDSTREAMWAN 40.139.91.17 40.139.91.17
CharterWANGW (default) CHARTERWAN 47.47.60.89 47.47.60.89 Charter

johnpoz

@dcihon said in Can't get to login.microsoft.com:

40.0.0.0/5 link#3 U 2827313 1500 bce1
40.139.91.18 link#3 UHS 0 16384 lo0

Where did that come from... Looks someone put a 40.139.91.18 address on pfsense with a mask of /5

WindstreamWANGW WINDSTREAMWAN 40.139.91.17 40.139.91.17

That is not suppose to be a /5 that is for sure ;)

dcihon

It was already here when I got here.
There are 2 ISP's coming in.
I am going to get rid of one of them but I can't yet.
It is running their phone system and I can't get rid of it yet.
It is the 40. address I believe.
I know the 47. ISP is the one I want for Internet traffic.

dcihon

40.139.91.18 address on pfsense with a mask of /5
I changed this to /24 and it fixed the problem.
Not sure if I caused some other problem.
Thanks for everyone's help.

johnpoz

You need to check to see what the mask is actually suppose to be - a /24 seems large as well.. See the other one you have with a /29 that is more realistic for IP space an ISP would give you, etc.

I would check with ISP what the settings should be!!!

What I can tell you for sure though - is not suppose to be a /5 ;) That is a freaking HUGE!!!!!! 134 Million addresses!!!

If I had to make an educated guess if that address is assigned to you I would guess either a /30 or /29 would be the most logical.. Those or maybe a /28 would put the wire at .16 and would make sense for your .17 gateway and .18 address.

With that /5 you wouldn't of been able to access any internet site using any of those 134 some million addresses..