NBASE-T Support for Intel X550
-
i can't change media
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig -m ix0 ix0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8538b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO> capabilities=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether a0:36:9f:17:c7:06 inet 192.168.10.254 netmask 0xffffff00 broadcast 192.168.10.255 media: Ethernet autoselect (10Gbase-T <full-duplex>) status: active supported media: media autoselect media 100baseTX media 1000baseT media 10Gbase-T nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>there is no 5 or 2,5 that can be selected
-
The only reference I see for 2.5Gbps even in the most recent ix driver is for 2500base-KX like we use for the internal link in the XG-7100, where no PHY exists:
https://github.com/freebsd/freebsd/blob/fe710b3242abb89deab33c466c1911d45dbde795/sys/dev/ixgbe/if_ix.c#L1238Steve
-
AFAIK NBASE-T for X550 is supported only for Windows and Linux OSes, moreover, on release NBASE-T was stated only for Linux by INTEL ARK.
I've been running into the same issue with speeds and same card on FreeBSD and the solution was to place the cheapest unmanaged switch with NBASE-T supported, but the other end must support NBASE-T speed switching and you should manually select the desired speed or you need the managed switch. -
[2.4.5-RELEASE][admin@pfSense.localdomain]/root: ifconfig -m ix1 ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8400b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO> capabilities=f507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6> ether a0:36:9f: hwaddr a0:36:9f: inet6 fe80::a236:9fff:fe27:b1f6%ix1 prefixlen 64 scopeid 0x2 inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect (Unknown) status: active supported media: media autoselect media 100baseTX media 1000baseT media 10Gbase-Tthis is how it looks when runing at 2.5gbps. it seems to work fine was passing traffic, but has that scary unknown on ui. also still not able to select 2.5g/5g as listed under linux drivers by intel ARK for x550 specs. maybe its not been updated yet under pfsense.
-
Interesting. The other end shows it linked at 2.5G though?
-
Just re-tested it also.
I can confirm that selecting on the other end speeds below 10G is now working and yes, it's "unknown" mode on pfSense side. But I do not think there is anything to do with that since Intel driver does not report any speed, not pfSense. -
@stephenw10 yes , i had to use a realtek 2.5g on a new board because i could not get x550 to change to 2.5g under PFsense or on the other side on windows system. it would be nice if PFsense suported 2.5 and 5g as selectable on its end if posible. idk where there is a hiccup in support, intel - bsd - pfsense. intel says under linux driver it should be setectable so idk,
thank you for keeping an eye on this issue.
-
under windows driver nbase t is only for auto-negotiating depending on link partner. but under Linux it should be fully supported and select-able. unless i am missing something.
https://www.intel.com/content/dam/www/public/us/en/documents/release-notes/ethernet-controller-x550-feature-support-matrix.pdf
-
If Intel says it's Linux only then that's probably true since they write the FreeBSD drivers themselves. There is probably nothing much we can do about that but wait for an update.
If the driver shows it as selectable then pfSense should also show that, the values from the driver are just passed through.Steve
-
so even its not user select-able under BSD why is the driver seeing the current state as unknown. it work at 2.5/5 with auto negotiating when at link partner request under every other OS and displays it under ui and driver but its not displaying the current state under BSD. the HW support is there but the driver just does not know what is going on ?
i don't have a spare box up atm so i can just test on windows and pfsense(bsd)
here is X550 under windows driver connecting to the same realtek 2.5 board working and displaying fine. only the user selectablity to NBase-t is limited to linux. auto negotiating to nbase-t should be working on all drivers and os, should be displayed on ui.
-
Pretty much, yeah. The driver in FreeBSD 11.3 / pfSense 2.4.5 cannot return a link speed of 2.5G or 5G but it seemingly can show unknown.
The most recent drivers will be in FreeBSD 12 or those Intel offers for download.Try a pfSense 2.5 snapshot, currenntly based on 12-rel. Or a newer FreeBSD image.
Steve
-
[2.5.0-DEVELOPMENT][admin@pfSense.localdomain]/root: ifconfig -m ix1 ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e538bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> capabilities=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether a0:36:9f: inet6 fe80::a236:9fff:fe27:b1f6%ix1 prefixlen 64 scopeid 0x2 inet6 fe80::1:1%ix1 prefixlen 64 scopeid 0x2 inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (Unknown) status: active supported media: media autoselect media 100baseTX media 1000baseT media 10Gbase-Tsame in 2.5.0 :( definitely an FreeBSD/PFsense driver only issue . tested with Ubuntu bootable usb as well. as with windows it displays and auto negotiates at 2.5g just fine, i may test under newest FreeBSD tomorrow on the pfsense box it self.
-
Mine was always 2.5. Definitely FreeBSD/Intel issue, nothing to do on pfSense side. But at least it works now and this should not be a problem anyway.
-
Even the latest driver from Intel does not list 2.5G or 5G link speeds.
https://downloadcenter.intel.com/download/14688/Intel-Network-Adapters-Driver-for-PCIe-10-Gigabit-Network-Connections-Under-FreeBSD-?product=192957Steve
-
@stephenw10
This is the same driver we have in pfSense 2.5.0. Don't know are there any plans to implement full support for NBASE-T or not, can't find anything about it on FreeBSD side. -
Installed a Netgear CM2000 modem today. It's a DOCSIS 3.1 modem with a single 2.5GBASE-T port. The modem reports a 2.5G connection and pfSense reports "Unknown" as @WanTime showed earlier. I also see "<rxpause,txpause>" but it does not affect the connection as far as I can tell.
I'm getting an aggregate bandwidth of about 1.2 Gbps between devices so Comcast is overprovisioning my gigabit service. Upload is still terrible however.
-
Can anyone recommend a 1-port and/or 2-port low profile card?
-
Just another data point:
pfsense 2.5.1-RELEASE (amd64)
Intel X550-T2 connected to the 2.5Gb port on an Arris Surfboard S33 Cable Modem support page:
Standard Specification Compliant DOCSIS 3.1 Hardware Version V1.0 Software Version TB01.01.001.14_102120_192.S3 Energy Efficient Ethernet EnabledConnected with a 10m Cat8 Cable.
ifconfig -m ix1 reports:
media: Ethernet autoselect (Unknown <rxpause,txpause>) status: active supported media: media autoselect media 100baseTX media 1000baseT media 10Gbase-TFrom the transfer speeds it definitely seems to be connected at greater than 1Gb and seems to be 2.5Gb from what I can tell. Obviously it's not paused.
The latest Intel Driver is 3.3.24
The README still says:
This driver supports the following media type options: Media Type Description ---------- ----------- autoselect Enables auto-negotiation for speed and duplex. 10baseT/UTP Sets speed to 10 Mbps. Use the ifconfig mediaopt option to select full-duplex mode. 100baseTX Sets speed to 100 Mbps. Use the ifconfig mediaopt option to select full-duplex mode. 1000baseTX Sets speed to 1000 Mbps. In this case, the driver supports only full-duplex mode. 1000baseSX Sets speed to 1000 Mbps. In this case, the driver supports only full-duplex mode.Here's the dmesg output from boot:
... ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfcc00000-0xfcffffff,0xfcbfc000-0xfcbfffff irq 19 at device 0.0 on pci2 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 8 RX queues 8 TX queues ix0: Using MSI-X interrupts with 9 vectors ix0: allocated for 8 queues ix0: allocated for 8 rx queues ix0: Ethernet address: a0:36:9f:28:1f:a6 ix0: PCI Express Bus: Speed 5.0GT/s Width x4 ix0: netmap queues/slots: TX 8/2048, RX 8/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfc400000-0xfc7fffff,0xfcbf8000-0xfcbfbfff irq 18 at device 0.1 on pci2 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 8 RX queues 8 TX queues ix1: Using MSI-X interrupts with 9 vectors ix1: allocated for 8 queues ix1: allocated for 8 rx queues ix1: Ethernet address: a0:36:9f:28:1f:a4 ix1: PCI Express Bus: Speed 5.0GT/s Width x4 ix1: netmap queues/slots: TX 8/2048, RX 8/2048 ... lo0: link state changed to UP ix1: link state changed to UP ix1: link state changed to DOWN igb1: link state changed to UP ix1: link state changed to UP pflog0: promiscuous mode enabled re0: link state changed to DOWN igb1: promiscuous mode enabled ...WAN is on ix1, LAN is on igb1, ix0, igb0, and re0 (motherboard) are not currently connected. Eventually ix0 will connected to a 10GBASE-T SFP+ transceiver on a 10G switch as soon as I get around to installing the switch with another 10G Cat8.
So the hardware still seems happy to auto-negotiate to 2500Mbps, even though the FreeBSD ix driver can't report it. ¯_(ツ)_/¯ Annoying, but usable. Where do I sign the "Dear Intel" "metoo" petition? ;-)
-
The presence of
<rxpause,txpause>there indicates that flow control is active on that link. Not that it's actually paused at that moment. -
I knew that! :-)
Sorry, I should have rephrased that as “Flow Control appears to be working.” Rather than saying the NIC does not appear to be paused. Doh! ;-)
Any guess on when/if this could be addressed by Intel or someone else?
