Client Isolation by Default
-
Most AP's (thus Wifi switches) offer that possibility : wifi clients can connect to the gateway, and nobody else. The AP enforces it.
Manageable switches can do the same thing.pfSense can't help you here.
Even Microsoft Windows has this possibility build in for very long now :
It's exactly that what is been asked when you connect to a new network (cable or Wifi) :
Is it Private and trusted ?
Or Public ?If Public is chosen, your Windows device will only communicate with the gateway, blocking everybody on the LAN segment out.
Public is of course the way to go when you connect to a public - non trusted Wifi network. Your isolated !
If that (Wifi) network is trusted you should have a talk with the device owner : you're trusting him right ? And he brings in nasty ware ? -
@ProfessorManhattan said in Client Isolation by Default:
Is there a particular feature I need to look for?
What a switch maker might call it might vary, but this is commonly called a private vlan.
https://en.wikipedia.org/wiki/Private_VLAN
-
We v done it here a kind of complex way for a workbench
8 port vlan switch
Used 7 ports 7 vlans 7 dhcps and on and on all on pfS workingPS
Firewall rules included :) -
Yeah that is hard way to do it ;) hehehe Doesn't scale very well.. What if you have say 500 devices...
-
Doesn't your switch do that? My Cisco switch certainly does and, IIRC, even my crappy TP-Link switch does too.
-
Yeah my switches do it - not sure about the 40$ ones though.. Your saying the $40 tplink that don't really do vlans correctly and don't allow you remove vlan 1 in old versions support private vlans?
-
Hang on a minute while I check.
.
.
.
Sorry, I didn't remember correctly. I must have been thinking of my crappy TP-Link AP, which does have that. It also doesn't do VLANs correctly. -
Yeah many a AP can do client isolation keeping wireless devices from talking to each other.. Even the crappiest of 20$ wifi router support this feature quite often ;)
But wired switches, I think they need to be more of a full managed switch.. Doesn't it mean it has to be $1k enterprise.. My 200$ small business sg300's can do it for example.
The work around for when you have a handful of devices sure is viable even on a $40 smart switch... That works if you have only a handful of devices.. But what if you had 100 ;) hehehehe
-
Vlan hoppin and tp link
And yes the hard way when you do not trust your cheap switch -
I don't use that TP-Link switch for VLANs. I've configured it to use as a data tap, so I can monitor Ethernet connections with Wireshark. It works fine there.
-
any suggestions for a cheap switch that can do client isolation out of the box ?
;) brNP -
@noplan said in Client Isolation by Default:
any suggestions for a cheap switch that can do client isolation out of the box ?
;) brNPD-Link has a cheap ($35 USD) managed switch, the DGS-1100-05. I quickly looked at the overview, but, like @johnpoz says, a manufacturer could call it something completely different. I didn't see the words "client isolation" specifically. You might have to chat or call them to ask.
You could, and I'm not saying it's a good idea, but you could, with that switch, setup VLANs to do some basic isolation.
Jeff
-
Yeah I feel ya
That's exactly why we used the hard not well scalable approach for a 8 port switch ;)
-
@noplan
So dlink calls it Asymmetric VLANsIts the same thing - so yeah your good with a switch like that..
-
Hey thanks for the hint
We got here some dgs-1100-08 hanging around in their dusty boxes :)Let's go testin!!!
