Bypass At&t fiber BGW210-700
-
Thanks @stephenw10 it you could let me know I would appreciate it!
-
[spam was here]
-
Um.... what? Smells like spam...
Edit: Yup spam.Anyway: https://redmine.pfsense.org/issues/10463
-
Thanks @stephenw10 so it sounds like in this case it’s only going to be available in 64 bit for 2.4.5.
Would it be possible to get the compiled file from the 2.4.4 build that was for arm and I can try that out?
-
Yes, and it does appear to load OK but I have no way to test it:
[2.4.5-RELEASE][admin@1100-4.stevew.lan]/root: pkg add https://repo01.netgate.com/pkg/pfSense_factory-v2_4_4_aarch64-pfSense_factory-v2_4_4/All/ng_etf-kmod-0.1.txz Fetching ng_etf-kmod-0.1.txz: 100% 4 KiB 3.8kB/s 00:01 Installing ng_etf-kmod-0.1... Extracting ng_etf-kmod-0.1: 100% [2.4.5-RELEASE][admin@1100-4.stevew.lan]/root: kldload ng_etf [2.4.5-RELEASE][admin@1100-4.stevew.lan]/root: kldstat Id Refs Address Size Name 1 11 0xffff000000000000 17c01a0 kernel 2 1 0xffff000040f47000 41000 safexcel.ko 3 1 0xffff000040fa0000 41000 cryptodev.ko 4 1 0xffff000041123000 31000 ng_etf.koSteve
-
@stephenw10 will give this a shot, I did add the package from the repo and was able to load it up with kldload so that's promising :)
I appreciate your help!
-
@stephenw10 as a follow-up it does work on SG-1100 with 2.4.5, I was able to set it up and am now bypassing the ATT RG completely.
One thing I did run into was that my interface names differed from the output of ngctl and ifconfig, so I needed to manually change some parts of the script.
But so far so good!
-
First off, I'm not sure if there is a difference in repository information from 2.4.4 and 2.4.5, but I was trying to follow the instructions of installing ng_etf_kmod with no luck. When I enter "pkg search etf", I get no return. If I ignore the no return of information and move on to the next step, "pkg install ng_etf-kmod", I get all the text of updating repository catalog and all repositories are up-to-date, but "No packages available to install matching 'ng_etf-kmod' have been found in the repositories."
I am wondering if I've missed a prerequisite step of adding a repository. If so, how do I add the missing repository?
-
There is a difference. What are you installing on?
It's in kernel for amd64 but missing from 2.4.5 for other architectures. See the discussion in the last few posts here.
Steve
-
@stephenw10 Hey I need some help, I'm on 2.45 amd64 and when I try to run the script pfatt.sh it says "ng_etf file not found". I know its in kernel for 2.45 but when I run kldstat I don't see it on the list. Is there a step I am missing?
I'm using the pfatt.sh from link here.
-
If you're using the script from there you should not see that as it won't try to load the module. Assuming you didn't set opnsense=yes.
You have to use
kldstat -vto see the in-kernel modules.Steve
-
@stephenw10 Thanks for replying. Ok I see it in kldstat -v. Yeah I have opnsense='no' but it still comes up as file not found. Since its in kernel I should just be able to edit the pfatt and it work right?
-
Hmm, the logic is not quite right in the script then. Seems like it should be
-lt. The error should not matter though the module is still available, it doesn't look like the script does anything with the error.Steve
-
@stephenw10 Do I have to load the module?
-
No it's already in the kernel in 2.4.5.
-
@stephenw10 hmm yeah not sure why its not working then. I reinstalled pfsense and used the older script file link and still same error.
-
Yeah the old will try to load the module as was required in 2.4.4 and fail. Just comment out those lines if the error is causing a problem.
The error doesn't do anything though so if it's not working that's not the reason.Steve
-
For those that have successfully bypassed their AT&T Fiber Gateway, I am curious about if this has any effect on acquiring multiple static IP addresses? I was told that I can order static IP addresses but I have a suspicion that they are going to insist that they do things to the gateway to make it work. Does my suspicion have any warrant? Also, despite following instructions, it appears I do not have the ability to use IPv6... I'm not sure if it changed from a standard offering to a premium service or what. I used the pfatt.sh script using the ngeth0 interface, not the WPA_supplicant, to bypass the gateway. I still have my gateway plugged into the pfSense via a third NIC with the ONT on my first NIC and LAN on second.
-
@stephenw10 Ok got it all working last night, just had to comment out those lines and was all good. Thanks for the help!
-
@stephenw10 sorry back again :)
I decided to bump up to the SG-3100 and started through this process again. After updating to 2.4.5, I do not see the ng_etf (with kldstat -v | grep ng_etf) type so tried to pull it from the repo again but now I'm getting a certificate failure.
Script is running part of the way through but not completing because it can't find the type.
I suspect this is something simple I'm missing.
Thanks!
[2.4.5-RELEASE][admin@pfSense.localdomain]/boot/kernel: pkg add https://repo01.netgate.com/pkg/pfSense_factory-v2_4_4_aarch64-pfSense_factory-v2_4_4/All/ng_etf-kmod-0.1.txz
Certificate verification failed for /C=US/ST=Texas/L=Austin/O=Rubicon Communications, LLC (Netgate)/CN=repo01.netgate.com
545659552:error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed:/build/factory-crossbuild-245-armv6/sources/FreeBSD-src/crypto/openssl/ssl/s3_clnt.c:1269:
Certificate verification failed for /C=US/ST=Texas/L=Austin/O=Rubicon Communications, LLC (Netgate)/CN=repo01.netgate.com
545659552:error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed:/build/factory-crossbuild-245-armv6/sources/FreeBSD-src/crypto/openssl/ssl/s3_clnt.c:1269:
Certificate verification failed for /C=US/ST=Texas/L=Austin/O=Rubicon Communications, LLC (Netgate)/CN=repo01.netgate.com
545659552:error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed:/build/factory-crossbuild-245-armv6/sources/FreeBSD-src/crypto/openssl/ssl/s3_clnt.c:1269:
pkg: https://repo01.netgate.com/pkg/pfSense_factory-v2_4_4_aarch64-pfSense_factory-v2_4_4/All/ng_etf-kmod-0.1.txz: Authentication error
