pfSense Active CARP Member Crashed: aesni_process -> crypto_dispatch ...

monotypeTattoo

Thank you Jimp.
We had a re-occurrence last night. That was 12 days after the first incident. We are going to leave it another 12 days and then upgrade to 2.4.5.

monotypeTattoo

This has happened again, still on 2.4.4-p3:

Tracing pid 12 tid 100124 td 0xfffff80004760000
pf_test() at pf_test+0x1d24/frame 0xfffffe00003000c0
pf_check_out() at pf_check_out+0x1d/frame 0xfffffe00003000e0
pfil_run_hooks() at pfil_run_hooks+0x90/frame 0xfffffe0000300170
ip_output() at ip_output+0xb1d/frame 0xfffffe00003002a0
ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe00003002f0
esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0000300350
aesni_process() at aesni_process+0x151/frame 0xfffffe0000300400
crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0000300440
esp_output() at esp_output+0x5cc/frame 0xfffffe00003004e0
ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0000300580
ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe00003005b0
ip_forward() at ip_forward+0x221/frame 0xfffffe0000300650
ip_input() at ip_input+0x72a/frame 0xfffffe00003006b0
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0000300700
ether_demux() at ether_demux+0x173/frame 0xfffffe0000300730
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0000300790
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe00003007e0
ether_input() at ether_input+0x26/frame 0xfffffe0000300800
igb_rxeof() at igb_rxeof+0x6e1/frame 0xfffffe0000300890
igb_msix_que() at igb_msix_que+0x110/frame 0xfffffe00003008e0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0000300920
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0000300970
fork_exit() at fork_exit+0x83/frame 0xfffffe00003009b0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00003009b0

That's the third time, 19 days since the last crash.
We have started rolling 2.4.5 out across our sites and dare say this firewall will be upgraded to 2.4.5 before it crashes again.

Will advise whether the upgrade resolves the problem.

monotypeTattoo

We upgraded to 2.4.5 on Monday (2020-05-04).
Tonight the primary firewall crashed again tonight. Stack trace looks very similar from line 7 onwards.

We are going to turn off AES-NI acceleration later on tonight.

Tracing pid 12 tid 100135 td 0xfffff8000470f620
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe0000336e10
vpanic() at vpanic+0x19b/frame 0xfffffe0000336e70
panic() at panic+0x43/frame 0xfffffe0000336ed0
trap_pfault() at trap_pfault/frame 0xfffffe0000336f20
trap_pfault() at trap_pfault+0x49/frame 0xfffffe0000336f80
trap() at trap+0x29d/frame 0xfffffe0000337090
calltrap() at calltrap+0x8/frame 0xfffffe0000337090
--- trap 0xc, rip = 0xffffffff80e89c3b, rsp = 0xfffffe0000337160, rbp = 0xfffffe0000337280 ---
ip_output() at ip_output+0x12fb/frame 0xfffffe0000337280
ipsec_process_done() at ipsec_process_done+0x1c7/frame 0xfffffe00003372d0
esp_output_cb() at esp_output_cb+0xea/frame 0xfffffe0000337330
aesni_process() at aesni_process+0x151/frame 0xfffffe00003373e0
crypto_dispatch() at crypto_dispatch+0x14d/frame 0xfffffe0000337410
esp_output() at esp_output+0x601/frame 0xfffffe00003374b0
ipsec4_perform_request() at ipsec4_perform_request+0x38c/frame 0xfffffe0000337550
ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0000337580
ip_forward() at ip_forward+0x230/frame 0xfffffe0000337620
ip_input() at ip_input+0x724/frame 0xfffffe00003376b0
netisr_dispatch_src() at netisr_dispatch_src+0xa2/frame 0xfffffe0000337700
ether_demux() at ether_demux+0x15b/frame 0xfffffe0000337730
ether_nh_input() at ether_nh_input+0x32c/frame 0xfffffe0000337790
netisr_dispatch_src() at netisr_dispatch_src+0xa2/frame 0xfffffe00003377e0
ether_input() at ether_input+0x26/frame 0xfffffe0000337800
igb_rxeof() at igb_rxeof+0x6d5/frame 0xfffffe0000337890
igb_msix_que() at igb_msix_que+0x101/frame 0xfffffe00003378e0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0000337920
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0000337970
fork_exit() at fork_exit+0x83/frame 0xfffffe00003379b0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00003379b0

FreeBSD 11.3-STABLE #236 21cbb70bbd1(RELENG_2_4_5): Tue Mar 24 15:26:53 EDT 2020     root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense

monotypeTattoo

We turned off AES-NI but that capped IpSec VPN traffic to 8 Mb/s (seemed very drastic?)
We've turned AES-NI back on.

We've got physically identical firewalls ready to go in at one of our other sites. Once we have those in situ, we will look at firmware upgrades and tweaking AES ciphers.

monotypeTattoo

Quick update, we experienced an identical crash on 2020-05-08.
Will keep apprised for developments as we hopefully, in the coming weeks, roll out firmware upgrades.

jimp

Under VPN > IPsec, Advanced settings tab, do you have Asynchronous Cryptography checked? If so, try unchecking it.

monotypeTattoo

Hi Jimp,

We don't have the asynchronous cryptography option checked.

Thank you.

monotypeTattoo

Another crash late last night.
Different stack trace this time.

We haven't made any changes as yet as we have been waiting for our physically identical firewalls at our other site get some bedding in time.

Tracing pid 12 tid 100067 td 0xfffff8000435e000
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe003e10e4a0
vpanic() at vpanic+0x19b/frame 0xfffffe003e10e500
panic() at panic+0x43/frame 0xfffffe003e10e560
trap_pfault() at trap_pfault/frame 0xfffffe003e10e5b0
trap_pfault() at trap_pfault+0x49/frame 0xfffffe003e10e610
trap() at trap+0x29d/frame 0xfffffe003e10e720
calltrap() at calltrap+0x8/frame 0xfffffe003e10e720
--- trap 0xc, rip = 0xffffffff80e8127a, rsp = 0xfffffe003e10e7f0, rbp = 0xfffffe003e10e870 ---
ip_input() at ip_input+0x5da/frame 0xfffffe003e10e870
swi_net() at swi_net+0x143/frame 0xfffffe003e10e8e0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe003e10e920
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe003e10e970
fork_exit() at fork_exit+0x83/frame 0xfffffe003e10e9b0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe003e10e9b0

monotypeTattoo

I'm not sure whether this will help in shining any light on the issue, but I've collated the relevant contents of msgbuf.txt from each crash:

2020-05-26

Fatal trap 12: page fault while in kernel mode
cpuid = 7; apic id = 07

fault virtual address	= 0x3800

Fatal trap 12: page fault while in kernel mode
fault code		= supervisor write data, page not present
cpuid = 3; apic id = 03
instruction pointer	= 0x20:0xffffffff80e89c3b
fault virtual address	= 0x1
stack pointer	        = 0x0:0xfffffe000037d160

frame pointer	        = 0x0:0xfffffe000037d280

Fatal trap 12: page fault while in kernel mode

cpuid = 1; 
apic id = 01
Fatal trap 12: page fault while in kernel mode
fault virtual address	= 0x800
cpuid = 5; apic id = 05
fault virtual address	= 0x1
fault code		= supervisor read data, page not present
fault code		= supervisor write data, page not present
instruction pointer	= 0x20:0xffffffff80e8127a
stack pointer	        = 0x0:0xfffffe003e10e7f0
frame pointer	        = 0x0:0xfffffe003e10e870
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (swi1: netisr 6)
trap number		= 12
panic: page fault
cpuid = 5
KDB: enter: panic

2020-05-16

Fatal trap 12: page fault while in kernel mode


Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address	= 0x1000
fault code		= supervisor write data, page not present



Fatal trap 12: page fault while in kernel mode
Fatal trap 12: page fault while in kernel mode
cpuid = 6; apic id = 06
fault virtual address	= 0x3000
fault code		= supervisor write data, page not present

instruction pointer	= 0x20:0xffffffff80e89c3b
stack pointer	        = 0x28:0xfffffe0000373160
frame pointer	        = 0x28:0xfffffe0000373280
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (irq288: igb2:que 6)
trap number		= 12
panic: page fault
cpuid = 6
KDB: enter: panic

2020-05-08

Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address	= 0x1000

fault code		= supervisor write data, page not present

instruction pointer	= 0x20:0xffffffff80e89c3b
Fatal trap 12: page fault while in kernel mode
stack pointer	        = 0x28:0xfffffe000034b160
frame pointer	        = 0x28:0xfffffe000034b280

code segment		= base 0x0, limit 0xfffff, type 0x1b

			= DPL 0, pres 1, long 1, def32 0, gran 1
Fatal trap 12: page fault while in kernel mode
processor eflags	= interrupt enabled, cpuid = 6; apic id = 06
fault virtual address	= 0x3000
fault code		= supervisor write data, page not present
instruction pointer	= 0x20:0xffffffff80e89c3b
stack pointer	        = 0x28:0xfffffe0000373160
frame pointer	        = 0x28:0xfffffe0000373280
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= resume, IOPL = 0
current process		= 12 (irq284: igb2:que 2)
trap number		= 12
panic: page fault
cpuid = 2
KDB: enter: panic

2020-05-06

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x0
fault code		= supervisor write data, page not present
instruction pointer	= 0x20:0xffffffff80e89c3b
stack pointer	        = 0x28:0xfffffe0000337160
frame pointer	        = 0x28:0xfffffe0000337280
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (irq282: igb2:que 0)
trap number		= 12
panic: page fault
cpuid = 0
KDB: enter: panic

2020-04-14

Fatal trap 12: page fault while in kernel mode
cpuid = 4; apic id = 04
fault virtual address	= 0x1
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80f447a4
stack pointer	        = 0x28:0xfffffe00002ffe90
frame pointer	        = 0x28:0xfffffe00003000c0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (irq286: igb2:que 4)

2020-03-15

Fatal trap 12: page fault while in kernel mode


cpuid = 0; 
Fatal trap 12: page fault while in kernel mode

Fatal trap 12: page fault while in kernel mode
cpuid = 7; apic id = 07
cpuid = 5; 
apic id = 05

Fatal trap 12: page fault while in kernel mode
fault virtual address	= 0x1
cpuid = 1; fault code		= supervisor read data, page not present
apic id = 01
instruction pointer	= 0x20:0xffffffff80f447a4
stack pointer	        = 0x28:0xfffffe0000309e90
frame pointer	        = 0x28:0xfffffe000030a0c0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
fault virtual address	= 0x1
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80f447a4
stack pointer	        = 0x28:0xfffffe000031de90
frame pointer	        = 0x28:0xfffffe000031e0c0
fault virtual address	= 0x1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (irq287: igb2:que 5)

We are going to do some benchmarking with OpenVPN today and see if we can use it instead of ipSec for a couple of weeks. We're also discussing swapping the master/stand-by firewalls around, in order to rule-in/rule-out are hardware problem.

mazafak

we are seeing the same exact problem. panics/reboots every 5-7 days.
setup: 2.4.4-p3, CARP, VLANs, site-to-site Ipsec(aesni in use). hardware was fully replaced to eliminate HW related problems.
May 16

db:0:kdb.enter.default>  show pcpu
cpuid        = 3
dynamic pcpu = 0xfffffe044c606380
curthread    = 0xfffff8000c429000: pid 12 "irq351: ixl3:q3"
curpcb       = 0xfffffe0451afa400
fpcurthread  = none
idlethread   = 0xfffff8000835b620: tid 100006 "idle: cpu3"
curpmap      = 0xffffffff82b85998
tssp         = 0xffffffff82bb6948
commontssp   = 0xffffffff82bb6948
rsp0         = 0xfffffe0451afa400
gs32p        = 0xffffffff82bbd1a0
ldt          = 0xffffffff82bbd1e0
tss          = 0xffffffff82bbd1d0
db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100284 td 0xfffff8000c429000
pf_test() at pf_test+0x1d24/frame 0xfffffe0451af9880
pf_check_out() at pf_check_out+0x1d/frame 0xfffffe0451af98a0
pfil_run_hooks() at pfil_run_hooks+0x90/frame 0xfffffe0451af9930
ip_output() at ip_output+0xb1d/frame 0xfffffe0451af9a60
ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe0451af9ab0
esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0451af9b10
aesni_process() at aesni_process+0x151/frame 0xfffffe0451af9bc0
crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0451af9c00
esp_output() at esp_output+0x5cc/frame 0xfffffe0451af9ca0
ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0451af9d40
ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0451af9d70
ip_forward() at ip_forward+0x221/frame 0xfffffe0451af9e10
ip_input() at ip_input+0x72a/frame 0xfffffe0451af9e70
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af9ec0
ether_demux() at ether_demux+0x173/frame 0xfffffe0451af9ef0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451af9f50
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af9fa0
ether_input() at ether_input+0x26/frame 0xfffffe0451af9fc0
vlan_input() at vlan_input+0x215/frame 0xfffffe0451afa070
ether_demux() at ether_demux+0x15c/frame 0xfffffe0451afa0a0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451afa100
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451afa150
ether_input() at ether_input+0x26/frame 0xfffffe0451afa170
ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451afa210
ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451afa260
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451afa2a0
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451afa2f0
fork_exit() at fork_exit+0x83/frame 0xfffffe0451afa330
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451afa330

May 21

db:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo>  show alllocks
No such command; use "help" to list available commands
db:1:lockinfo>  show lockedvnods
Locked vnodes
db:0:kdb.enter.default>  show pcpu
cpuid        = 4
dynamic pcpu = 0xfffffe044c610380
curthread    = 0xfffff8000ccf6620: pid 12 "irq352: ixl3:q4"
curpcb       = 0xfffffe0451aff400
fpcurthread  = none
idlethread   = 0xfffff8000835b000: tid 100007 "idle: cpu4"
curpmap      = 0xffffffff82b85998
tssp         = 0xffffffff82bb69b0
commontssp   = 0xffffffff82bb69b0
rsp0         = 0xfffffe0451aff400
gs32p        = 0xffffffff82bbd208
ldt          = 0xffffffff82bbd248
tss          = 0xffffffff82bbd238
db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100285 td 0xfffff8000ccf6620
ip_input() at ip_input+0x60e/frame 0xfffffe0451afee70
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451afeec0
ether_demux() at ether_demux+0x173/frame 0xfffffe0451afeef0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451afef50
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451afefa0
ether_input() at ether_input+0x26/frame 0xfffffe0451afefc0
vlan_input() at vlan_input+0x215/frame 0xfffffe0451aff070
ether_demux() at ether_demux+0x15c/frame 0xfffffe0451aff0a0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451aff100
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451aff150
ether_input() at ether_input+0x26/frame 0xfffffe0451aff170
ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451aff210
ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451aff260
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451aff2a0
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451aff2f0
fork_exit() at fork_exit+0x83/frame 0xfffffe0451aff330
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451aff330

May 24

db:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo>  show alllocks
No such command; use "help" to list available commands
db:1:lockinfo>  show lockedvnods
Locked vnodes
db:0:kdb.enter.default>  show pcpu
cpuid        = 0
dynamic pcpu = 0x898380
curthread    = 0xfffff8000c88f620: pid 12 "irq339: ixl2:q0"
curpcb       = 0xfffffe0451a16400
fpcurthread  = none
idlethread   = 0xfffff8000834c000: tid 100003 "idle: cpu0"
curpmap      = 0xffffffff82b85998
tssp         = 0xffffffff82bb6810
commontssp   = 0xffffffff82bb6810
rsp0         = 0xfffffe0451a16400
gs32p        = 0xffffffff82bbd068
ldt          = 0xffffffff82bbd0a8
tss          = 0xffffffff82bbd098
db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100263 td 0xfffff8000c88f620
ip_output() at ip_output+0x1418/frame 0xfffffe0451a15a60
ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe0451a15ab0
esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0451a15b10
aesni_process() at aesni_process+0x151/frame 0xfffffe0451a15bc0
crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0451a15c00
esp_output() at esp_output+0x5cc/frame 0xfffffe0451a15ca0
ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0451a15d40
ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0451a15d70
ip_forward() at ip_forward+0x221/frame 0xfffffe0451a15e10
ip_input() at ip_input+0x72a/frame 0xfffffe0451a15e70
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451a15ec0
ether_demux() at ether_demux+0x173/frame 0xfffffe0451a15ef0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451a15f50
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451a15fa0
ether_input() at ether_input+0x26/frame 0xfffffe0451a15fc0
vlan_input() at vlan_input+0x215/frame 0xfffffe0451a16070
ether_demux() at ether_demux+0x15c/frame 0xfffffe0451a160a0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451a16100
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451a16150
ether_input() at ether_input+0x26/frame 0xfffffe0451a16170
ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451a16210
ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451a16260
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451a162a0
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451a162f0
fork_exit() at fork_exit+0x83/frame 0xfffffe0451a16330
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451a16330

monotypeTattoo

Hello mazafak,

What hardware are you using?
When you replaced the hardware, was it a like for like replacement or did you change the specification in any way?

Thanks
M

monotypeTattoo

Probably also worth mentioning, we are using two Intel I350 Quad Port 1GbE network cards in each of our pfSense boxes.

mazafak

first it was a dell R430 with Intel X520 10gbe card (ix)
now it is a supermicro with Intel X710 10gbe card (ixl)

configuration was moved from the first host to the next. problem with crashes and reboots stayed.
here is a new one from 5/28

db:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo>  show alllocks
No such command; use "help" to list available commands
db:1:lockinfo>  show lockedvnods
Locked vnodes
db:0:kdb.enter.default>  show pcpu
cpuid        = 2
dynamic pcpu = 0xfffffe044c5fc380
curthread    = 0xfffff8000c67b000: pid 12 "irq350: ixl3:q2"
curpcb       = 0xfffffe0451af5400
fpcurthread  = none
idlethread   = 0xfffff8000834b000: tid 100005 "idle: cpu2"
curpmap      = 0xffffffff82b85998
tssp         = 0xffffffff82bb68e0
commontssp   = 0xffffffff82bb68e0
rsp0         = 0xfffffe0451af5400
gs32p        = 0xffffffff82bbd138
ldt          = 0xffffffff82bbd178
tss          = 0xffffffff82bbd168
db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100283 td 0xfffff8000c67b000
ip_output() at ip_output+0x1418/frame 0xfffffe0451af4a60
ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe0451af4ab0
esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0451af4b10
aesni_process() at aesni_process+0x151/frame 0xfffffe0451af4bc0
crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0451af4c00
esp_output() at esp_output+0x5cc/frame 0xfffffe0451af4ca0
ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0451af4d40
ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0451af4d70
ip_forward() at ip_forward+0x221/frame 0xfffffe0451af4e10
ip_input() at ip_input+0x72a/frame 0xfffffe0451af4e70
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af4ec0
ether_demux() at ether_demux+0x173/frame 0xfffffe0451af4ef0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451af4f50
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af4fa0
ether_input() at ether_input+0x26/frame 0xfffffe0451af4fc0
vlan_input() at vlan_input+0x215/frame 0xfffffe0451af5070
ether_demux() at ether_demux+0x15c/frame 0xfffffe0451af50a0
ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451af5100
netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af5150
ether_input() at ether_input+0x26/frame 0xfffffe0451af5170
ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451af5210
ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451af5260
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451af52a0
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451af52f0
fork_exit() at fork_exit+0x83/frame 0xfffffe0451af5330
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451af5330

monotypeTattoo

Hi Mazafak,

Any chance that you could let us know what model CPUs/chipsets you have reproduced the issue with?
Also the ciphers/hash algorithms used?

Thank you.

I've made a mistake in the initial post. We are using AES256-GCM, not AES256-CBC.

mazafak

I took ipsec settings from:
https://docs.netgate.com/pfsense/en/latest/vpn/scaling.html (scroll down to "Optimal Encryption Settings")

the supermicro mb is X11SDV-8C-TP8F, that's the one having crashes similar to the dell R430.

what is interesting is that on the other side of the ipsec tunnel we have another pfsense running on Super Micro XG-1537. it doesn't have VLAN/LACP setup and it has been rock solid for over a year.

so, it could be the VLAN code that's crashing for me. I will attempt upgrading to 2.4.5-p1 once it is available to see if it is any better.

monotypeTattoo

Thank you Mazafak.

We had another crash last night:

Tracing pid 12 tid 100065 td 0xfffff80004359000
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe003e1044a0
vpanic() at vpanic+0x19b/frame 0xfffffe003e104500
panic() at panic+0x43/frame 0xfffffe003e104560
trap_pfault() at trap_pfault/frame 0xfffffe003e1045b0
trap_pfault() at trap_pfault+0x49/frame 0xfffffe003e104610
trap() at trap+0x29d/frame 0xfffffe003e104720
calltrap() at calltrap+0x8/frame 0xfffffe003e104720
--- trap 0xc, rip = 0xffffffff80e8127a, rsp = 0xfffffe003e1047f0, rbp = 0xfffffe003e104870 ---
ip_input() at ip_input+0x5da/frame 0xfffffe003e104870
swi_net() at swi_net+0x143/frame 0xfffffe003e1048e0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe003e104920
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe003e104970
fork_exit() at fork_exit+0x83/frame 0xfffffe003e1049b0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe003e1049b0

astabing

We had very similar crashes on different pfSense 2.4.4 machines along with kernel: [zone: pf frag entries] PF frag entries limit reached messages in logs.

Crashes are gone after Enable MSS clamping on VPN traffic was enabled in IPsec advanced settings. Maybe its your case too ?

monotypeTattoo

@astabing said in pfSense Active CARP Member Crashed: aesni_process -> crypto_dispatch ...:

We had very similar crashes on different pfSense 2.4.4 machines along with kernel: [zone: pf frag entries] PF frag entries limit reached messages in logs.

Crashes are gone after Enable MSS clamping on VPN traffic was enabled in IPsec advanced settings. Maybe its your case too ?

We've never seen kernel: [zone: pf frag entries] PF frag entries limit reached and we enabled MSS clamping last week to resolve an IPSec throughput issue. We had another crash within 48 hours of making that change, so it didn't resolve it.

We've raised a FreeBSD Bugzilla report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=246951.

Thanks

monotypeTattoo

Looks like this may be fixed:

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=246951#c16

mazafak

opened https://redmine.pfsense.org/issues/10745
so that we know when this gets applied to pfsense and when we can go back to IPSec.