Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    pfSense Active CARP Member Crashed: aesni_process -> crypto_dispatch ...

    Scheduled Pinned Locked Moved IPsec
    22 Posts 4 Posters 1.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      monotypeTattoo
      last edited by

      We upgraded to 2.4.5 on Monday (2020-05-04).
      Tonight the primary firewall crashed again tonight. Stack trace looks very similar from line 7 onwards.

      We are going to turn off AES-NI acceleration later on tonight.

      Tracing pid 12 tid 100135 td 0xfffff8000470f620
      kdb_enter() at kdb_enter+0x3b/frame 0xfffffe0000336e10
      vpanic() at vpanic+0x19b/frame 0xfffffe0000336e70
      panic() at panic+0x43/frame 0xfffffe0000336ed0
      trap_pfault() at trap_pfault/frame 0xfffffe0000336f20
      trap_pfault() at trap_pfault+0x49/frame 0xfffffe0000336f80
      trap() at trap+0x29d/frame 0xfffffe0000337090
      calltrap() at calltrap+0x8/frame 0xfffffe0000337090
      --- trap 0xc, rip = 0xffffffff80e89c3b, rsp = 0xfffffe0000337160, rbp = 0xfffffe0000337280 ---
      ip_output() at ip_output+0x12fb/frame 0xfffffe0000337280
      ipsec_process_done() at ipsec_process_done+0x1c7/frame 0xfffffe00003372d0
      esp_output_cb() at esp_output_cb+0xea/frame 0xfffffe0000337330
      aesni_process() at aesni_process+0x151/frame 0xfffffe00003373e0
      crypto_dispatch() at crypto_dispatch+0x14d/frame 0xfffffe0000337410
      esp_output() at esp_output+0x601/frame 0xfffffe00003374b0
      ipsec4_perform_request() at ipsec4_perform_request+0x38c/frame 0xfffffe0000337550
      ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0000337580
      ip_forward() at ip_forward+0x230/frame 0xfffffe0000337620
      ip_input() at ip_input+0x724/frame 0xfffffe00003376b0
      netisr_dispatch_src() at netisr_dispatch_src+0xa2/frame 0xfffffe0000337700
      ether_demux() at ether_demux+0x15b/frame 0xfffffe0000337730
      ether_nh_input() at ether_nh_input+0x32c/frame 0xfffffe0000337790
      netisr_dispatch_src() at netisr_dispatch_src+0xa2/frame 0xfffffe00003377e0
      ether_input() at ether_input+0x26/frame 0xfffffe0000337800
      igb_rxeof() at igb_rxeof+0x6d5/frame 0xfffffe0000337890
      igb_msix_que() at igb_msix_que+0x101/frame 0xfffffe00003378e0
      intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0000337920
      ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0000337970
      fork_exit() at fork_exit+0x83/frame 0xfffffe00003379b0
      fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00003379b0
      
      FreeBSD 11.3-STABLE #236 21cbb70bbd1(RELENG_2_4_5): Tue Mar 24 15:26:53 EDT 2020     root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense
      
      1 Reply Last reply Reply Quote 0
      • M
        monotypeTattoo
        last edited by monotypeTattoo

        We turned off AES-NI but that capped IpSec VPN traffic to 8 Mb/s (seemed very drastic?)
        We've turned AES-NI back on.

        We've got physically identical firewalls ready to go in at one of our other sites. Once we have those in situ, we will look at firmware upgrades and tweaking AES ciphers.

        1 Reply Last reply Reply Quote 0
        • M
          monotypeTattoo
          last edited by

          Quick update, we experienced an identical crash on 2020-05-08.
          Will keep apprised for developments as we hopefully, in the coming weeks, roll out firmware upgrades.

          1 Reply Last reply Reply Quote 0
          • jimpJ
            jimp Rebel Alliance Developer Netgate
            last edited by

            Under VPN > IPsec, Advanced settings tab, do you have Asynchronous Cryptography checked? If so, try unchecking it.

            Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

            Need help fast? Netgate Global Support!

            Do not Chat/PM for help!

            1 Reply Last reply Reply Quote 0
            • M
              monotypeTattoo
              last edited by

              Hi Jimp,

              We don't have the asynchronous cryptography option checked.

              Thank you.

              1 Reply Last reply Reply Quote 0
              • M
                monotypeTattoo
                last edited by

                Another crash late last night.
                Different stack trace this time.

                We haven't made any changes as yet as we have been waiting for our physically identical firewalls at our other site get some bedding in time.

                Tracing pid 12 tid 100067 td 0xfffff8000435e000
                kdb_enter() at kdb_enter+0x3b/frame 0xfffffe003e10e4a0
                vpanic() at vpanic+0x19b/frame 0xfffffe003e10e500
                panic() at panic+0x43/frame 0xfffffe003e10e560
                trap_pfault() at trap_pfault/frame 0xfffffe003e10e5b0
                trap_pfault() at trap_pfault+0x49/frame 0xfffffe003e10e610
                trap() at trap+0x29d/frame 0xfffffe003e10e720
                calltrap() at calltrap+0x8/frame 0xfffffe003e10e720
                --- trap 0xc, rip = 0xffffffff80e8127a, rsp = 0xfffffe003e10e7f0, rbp = 0xfffffe003e10e870 ---
                ip_input() at ip_input+0x5da/frame 0xfffffe003e10e870
                swi_net() at swi_net+0x143/frame 0xfffffe003e10e8e0
                intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe003e10e920
                ithread_loop() at ithread_loop+0xe7/frame 0xfffffe003e10e970
                fork_exit() at fork_exit+0x83/frame 0xfffffe003e10e9b0
                fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe003e10e9b0
                
                1 Reply Last reply Reply Quote 0
                • M
                  monotypeTattoo
                  last edited by

                  I'm not sure whether this will help in shining any light on the issue, but I've collated the relevant contents of msgbuf.txt from each crash:

                  2020-05-26

                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 7; apic id = 07
                  
                  fault virtual address	= 0x3800
                  
                  Fatal trap 12: page fault while in kernel mode
                  fault code		= supervisor write data, page not present
                  cpuid = 3; apic id = 03
                  instruction pointer	= 0x20:0xffffffff80e89c3b
                  fault virtual address	= 0x1
                  stack pointer	        = 0x0:0xfffffe000037d160
                  
                  frame pointer	        = 0x0:0xfffffe000037d280
                  
                  Fatal trap 12: page fault while in kernel mode
                  
                  cpuid = 1; 
                  apic id = 01
                  Fatal trap 12: page fault while in kernel mode
                  fault virtual address	= 0x800
                  cpuid = 5; apic id = 05
                  fault virtual address	= 0x1
                  fault code		= supervisor read data, page not present
                  fault code		= supervisor write data, page not present
                  instruction pointer	= 0x20:0xffffffff80e8127a
                  stack pointer	        = 0x0:0xfffffe003e10e7f0
                  frame pointer	        = 0x0:0xfffffe003e10e870
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags	= interrupt enabled, resume, IOPL = 0
                  current process		= 12 (swi1: netisr 6)
                  trap number		= 12
                  panic: page fault
                  cpuid = 5
                  KDB: enter: panic
                  

                  2020-05-16

                  Fatal trap 12: page fault while in kernel mode
                  
                  
                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 2; apic id = 02
                  fault virtual address	= 0x1000
                  fault code		= supervisor write data, page not present
                  
                  
                  
                  Fatal trap 12: page fault while in kernel mode
                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 6; apic id = 06
                  fault virtual address	= 0x3000
                  fault code		= supervisor write data, page not present
                  
                  instruction pointer	= 0x20:0xffffffff80e89c3b
                  stack pointer	        = 0x28:0xfffffe0000373160
                  frame pointer	        = 0x28:0xfffffe0000373280
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags	= interrupt enabled, resume, IOPL = 0
                  current process		= 12 (irq288: igb2:que 6)
                  trap number		= 12
                  panic: page fault
                  cpuid = 6
                  KDB: enter: panic
                  

                  2020-05-08

                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 2; apic id = 02
                  fault virtual address	= 0x1000
                  
                  fault code		= supervisor write data, page not present
                  
                  instruction pointer	= 0x20:0xffffffff80e89c3b
                  Fatal trap 12: page fault while in kernel mode
                  stack pointer	        = 0x28:0xfffffe000034b160
                  frame pointer	        = 0x28:0xfffffe000034b280
                  
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  Fatal trap 12: page fault while in kernel mode
                  processor eflags	= interrupt enabled, cpuid = 6; apic id = 06
                  fault virtual address	= 0x3000
                  fault code		= supervisor write data, page not present
                  instruction pointer	= 0x20:0xffffffff80e89c3b
                  stack pointer	        = 0x28:0xfffffe0000373160
                  frame pointer	        = 0x28:0xfffffe0000373280
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags	= resume, IOPL = 0
                  current process		= 12 (irq284: igb2:que 2)
                  trap number		= 12
                  panic: page fault
                  cpuid = 2
                  KDB: enter: panic
                  

                  2020-05-06

                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 0; apic id = 00
                  fault virtual address	= 0x0
                  fault code		= supervisor write data, page not present
                  instruction pointer	= 0x20:0xffffffff80e89c3b
                  stack pointer	        = 0x28:0xfffffe0000337160
                  frame pointer	        = 0x28:0xfffffe0000337280
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags	= interrupt enabled, resume, IOPL = 0
                  current process		= 12 (irq282: igb2:que 0)
                  trap number		= 12
                  panic: page fault
                  cpuid = 0
                  KDB: enter: panic
                  

                  2020-04-14

                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 4; apic id = 04
                  fault virtual address	= 0x1
                  fault code		= supervisor read data, page not present
                  instruction pointer	= 0x20:0xffffffff80f447a4
                  stack pointer	        = 0x28:0xfffffe00002ffe90
                  frame pointer	        = 0x28:0xfffffe00003000c0
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  processor eflags	= interrupt enabled, resume, IOPL = 0
                  current process		= 12 (irq286: igb2:que 4)
                  

                  2020-03-15

                  Fatal trap 12: page fault while in kernel mode
                  
                  
                  cpuid = 0; 
                  Fatal trap 12: page fault while in kernel mode
                  
                  Fatal trap 12: page fault while in kernel mode
                  cpuid = 7; apic id = 07
                  cpuid = 5; 
                  apic id = 05
                  
                  Fatal trap 12: page fault while in kernel mode
                  fault virtual address	= 0x1
                  cpuid = 1; fault code		= supervisor read data, page not present
                  apic id = 01
                  instruction pointer	= 0x20:0xffffffff80f447a4
                  stack pointer	        = 0x28:0xfffffe0000309e90
                  frame pointer	        = 0x28:0xfffffe000030a0c0
                  code segment		= base 0x0, limit 0xfffff, type 0x1b
                  			= DPL 0, pres 1, long 1, def32 0, gran 1
                  fault virtual address	= 0x1
                  fault code		= supervisor read data, page not present
                  instruction pointer	= 0x20:0xffffffff80f447a4
                  stack pointer	        = 0x28:0xfffffe000031de90
                  frame pointer	        = 0x28:0xfffffe000031e0c0
                  fault virtual address	= 0x1
                  processor eflags	= interrupt enabled, resume, IOPL = 0
                  current process		= 12 (irq287: igb2:que 5)
                  

                  We are going to do some benchmarking with OpenVPN today and see if we can use it instead of ipSec for a couple of weeks. We're also discussing swapping the master/stand-by firewalls around, in order to rule-in/rule-out are hardware problem.

                  1 Reply Last reply Reply Quote 0
                  • M
                    mazafak
                    last edited by

                    we are seeing the same exact problem. panics/reboots every 5-7 days.
                    setup: 2.4.4-p3, CARP, VLANs, site-to-site Ipsec(aesni in use). hardware was fully replaced to eliminate HW related problems.
                    May 16

                    db:0:kdb.enter.default>  show pcpu
                    cpuid        = 3
                    dynamic pcpu = 0xfffffe044c606380
                    curthread    = 0xfffff8000c429000: pid 12 "irq351: ixl3:q3"
                    curpcb       = 0xfffffe0451afa400
                    fpcurthread  = none
                    idlethread   = 0xfffff8000835b620: tid 100006 "idle: cpu3"
                    curpmap      = 0xffffffff82b85998
                    tssp         = 0xffffffff82bb6948
                    commontssp   = 0xffffffff82bb6948
                    rsp0         = 0xfffffe0451afa400
                    gs32p        = 0xffffffff82bbd1a0
                    ldt          = 0xffffffff82bbd1e0
                    tss          = 0xffffffff82bbd1d0
                    db:0:kdb.enter.default>  bt
                    Tracing pid 12 tid 100284 td 0xfffff8000c429000
                    pf_test() at pf_test+0x1d24/frame 0xfffffe0451af9880
                    pf_check_out() at pf_check_out+0x1d/frame 0xfffffe0451af98a0
                    pfil_run_hooks() at pfil_run_hooks+0x90/frame 0xfffffe0451af9930
                    ip_output() at ip_output+0xb1d/frame 0xfffffe0451af9a60
                    ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe0451af9ab0
                    esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0451af9b10
                    aesni_process() at aesni_process+0x151/frame 0xfffffe0451af9bc0
                    crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0451af9c00
                    esp_output() at esp_output+0x5cc/frame 0xfffffe0451af9ca0
                    ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0451af9d40
                    ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0451af9d70
                    ip_forward() at ip_forward+0x221/frame 0xfffffe0451af9e10
                    ip_input() at ip_input+0x72a/frame 0xfffffe0451af9e70
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af9ec0
                    ether_demux() at ether_demux+0x173/frame 0xfffffe0451af9ef0
                    ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451af9f50
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af9fa0
                    ether_input() at ether_input+0x26/frame 0xfffffe0451af9fc0
                    vlan_input() at vlan_input+0x215/frame 0xfffffe0451afa070
                    ether_demux() at ether_demux+0x15c/frame 0xfffffe0451afa0a0
                    ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451afa100
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451afa150
                    ether_input() at ether_input+0x26/frame 0xfffffe0451afa170
                    ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451afa210
                    ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451afa260
                    intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451afa2a0
                    ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451afa2f0
                    fork_exit() at fork_exit+0x83/frame 0xfffffe0451afa330
                    fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451afa330
                    

                    May 21

                    db:0:kdb.enter.default>  run lockinfo
                    db:1:lockinfo> show locks
                    No such command; use "help" to list available commands
                    db:1:lockinfo>  show alllocks
                    No such command; use "help" to list available commands
                    db:1:lockinfo>  show lockedvnods
                    Locked vnodes
                    db:0:kdb.enter.default>  show pcpu
                    cpuid        = 4
                    dynamic pcpu = 0xfffffe044c610380
                    curthread    = 0xfffff8000ccf6620: pid 12 "irq352: ixl3:q4"
                    curpcb       = 0xfffffe0451aff400
                    fpcurthread  = none
                    idlethread   = 0xfffff8000835b000: tid 100007 "idle: cpu4"
                    curpmap      = 0xffffffff82b85998
                    tssp         = 0xffffffff82bb69b0
                    commontssp   = 0xffffffff82bb69b0
                    rsp0         = 0xfffffe0451aff400
                    gs32p        = 0xffffffff82bbd208
                    ldt          = 0xffffffff82bbd248
                    tss          = 0xffffffff82bbd238
                    db:0:kdb.enter.default>  bt
                    Tracing pid 12 tid 100285 td 0xfffff8000ccf6620
                    ip_input() at ip_input+0x60e/frame 0xfffffe0451afee70
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451afeec0
                    ether_demux() at ether_demux+0x173/frame 0xfffffe0451afeef0
                    ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451afef50
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451afefa0
                    ether_input() at ether_input+0x26/frame 0xfffffe0451afefc0
                    vlan_input() at vlan_input+0x215/frame 0xfffffe0451aff070
                    ether_demux() at ether_demux+0x15c/frame 0xfffffe0451aff0a0
                    ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451aff100
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451aff150
                    ether_input() at ether_input+0x26/frame 0xfffffe0451aff170
                    ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451aff210
                    ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451aff260
                    intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451aff2a0
                    ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451aff2f0
                    fork_exit() at fork_exit+0x83/frame 0xfffffe0451aff330
                    fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451aff330
                    

                    May 24

                    db:0:kdb.enter.default>  run lockinfo
                    db:1:lockinfo> show locks
                    No such command; use "help" to list available commands
                    db:1:lockinfo>  show alllocks
                    No such command; use "help" to list available commands
                    db:1:lockinfo>  show lockedvnods
                    Locked vnodes
                    db:0:kdb.enter.default>  show pcpu
                    cpuid        = 0
                    dynamic pcpu = 0x898380
                    curthread    = 0xfffff8000c88f620: pid 12 "irq339: ixl2:q0"
                    curpcb       = 0xfffffe0451a16400
                    fpcurthread  = none
                    idlethread   = 0xfffff8000834c000: tid 100003 "idle: cpu0"
                    curpmap      = 0xffffffff82b85998
                    tssp         = 0xffffffff82bb6810
                    commontssp   = 0xffffffff82bb6810
                    rsp0         = 0xfffffe0451a16400
                    gs32p        = 0xffffffff82bbd068
                    ldt          = 0xffffffff82bbd0a8
                    tss          = 0xffffffff82bbd098
                    db:0:kdb.enter.default>  bt
                    Tracing pid 12 tid 100263 td 0xfffff8000c88f620
                    ip_output() at ip_output+0x1418/frame 0xfffffe0451a15a60
                    ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe0451a15ab0
                    esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0451a15b10
                    aesni_process() at aesni_process+0x151/frame 0xfffffe0451a15bc0
                    crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0451a15c00
                    esp_output() at esp_output+0x5cc/frame 0xfffffe0451a15ca0
                    ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0451a15d40
                    ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0451a15d70
                    ip_forward() at ip_forward+0x221/frame 0xfffffe0451a15e10
                    ip_input() at ip_input+0x72a/frame 0xfffffe0451a15e70
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451a15ec0
                    ether_demux() at ether_demux+0x173/frame 0xfffffe0451a15ef0
                    ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451a15f50
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451a15fa0
                    ether_input() at ether_input+0x26/frame 0xfffffe0451a15fc0
                    vlan_input() at vlan_input+0x215/frame 0xfffffe0451a16070
                    ether_demux() at ether_demux+0x15c/frame 0xfffffe0451a160a0
                    ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451a16100
                    netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451a16150
                    ether_input() at ether_input+0x26/frame 0xfffffe0451a16170
                    ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451a16210
                    ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451a16260
                    intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451a162a0
                    ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451a162f0
                    fork_exit() at fork_exit+0x83/frame 0xfffffe0451a16330
                    fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451a16330
                    
                    1 Reply Last reply Reply Quote 1
                    • M
                      monotypeTattoo
                      last edited by

                      Hello mazafak,

                      What hardware are you using?
                      When you replaced the hardware, was it a like for like replacement or did you change the specification in any way?

                      Thanks
                      M

                      1 Reply Last reply Reply Quote 0
                      • M
                        monotypeTattoo
                        last edited by

                        Probably also worth mentioning, we are using two Intel I350 Quad Port 1GbE network cards in each of our pfSense boxes.

                        1 Reply Last reply Reply Quote 0
                        • M
                          mazafak
                          last edited by

                          first it was a dell R430 with Intel X520 10gbe card (ix)
                          now it is a supermicro with Intel X710 10gbe card (ixl)

                          configuration was moved from the first host to the next. problem with crashes and reboots stayed.
                          here is a new one from 5/28

                          db:0:kdb.enter.default>  run lockinfo
                          db:1:lockinfo> show locks
                          No such command; use "help" to list available commands
                          db:1:lockinfo>  show alllocks
                          No such command; use "help" to list available commands
                          db:1:lockinfo>  show lockedvnods
                          Locked vnodes
                          db:0:kdb.enter.default>  show pcpu
                          cpuid        = 2
                          dynamic pcpu = 0xfffffe044c5fc380
                          curthread    = 0xfffff8000c67b000: pid 12 "irq350: ixl3:q2"
                          curpcb       = 0xfffffe0451af5400
                          fpcurthread  = none
                          idlethread   = 0xfffff8000834b000: tid 100005 "idle: cpu2"
                          curpmap      = 0xffffffff82b85998
                          tssp         = 0xffffffff82bb68e0
                          commontssp   = 0xffffffff82bb68e0
                          rsp0         = 0xfffffe0451af5400
                          gs32p        = 0xffffffff82bbd138
                          ldt          = 0xffffffff82bbd178
                          tss          = 0xffffffff82bbd168
                          db:0:kdb.enter.default>  bt
                          Tracing pid 12 tid 100283 td 0xfffff8000c67b000
                          ip_output() at ip_output+0x1418/frame 0xfffffe0451af4a60
                          ipsec_process_done() at ipsec_process_done+0x1c8/frame 0xfffffe0451af4ab0
                          esp_output_cb() at esp_output_cb+0xeb/frame 0xfffffe0451af4b10
                          aesni_process() at aesni_process+0x151/frame 0xfffffe0451af4bc0
                          crypto_dispatch() at crypto_dispatch+0x140/frame 0xfffffe0451af4c00
                          esp_output() at esp_output+0x5cc/frame 0xfffffe0451af4ca0
                          ipsec4_perform_request() at ipsec4_perform_request+0x37f/frame 0xfffffe0451af4d40
                          ipsec4_forward() at ipsec4_forward+0x5a/frame 0xfffffe0451af4d70
                          ip_forward() at ip_forward+0x221/frame 0xfffffe0451af4e10
                          ip_input() at ip_input+0x72a/frame 0xfffffe0451af4e70
                          netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af4ec0
                          ether_demux() at ether_demux+0x173/frame 0xfffffe0451af4ef0
                          ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451af4f50
                          netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af4fa0
                          ether_input() at ether_input+0x26/frame 0xfffffe0451af4fc0
                          vlan_input() at vlan_input+0x215/frame 0xfffffe0451af5070
                          ether_demux() at ether_demux+0x15c/frame 0xfffffe0451af50a0
                          ether_nh_input() at ether_nh_input+0x32b/frame 0xfffffe0451af5100
                          netisr_dispatch_src() at netisr_dispatch_src+0xa8/frame 0xfffffe0451af5150
                          ether_input() at ether_input+0x26/frame 0xfffffe0451af5170
                          ixl_rxeof() at ixl_rxeof+0x47b/frame 0xfffffe0451af5210
                          ixl_msix_que() at ixl_msix_que+0x42/frame 0xfffffe0451af5260
                          intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe0451af52a0
                          ithread_loop() at ithread_loop+0xe7/frame 0xfffffe0451af52f0
                          fork_exit() at fork_exit+0x83/frame 0xfffffe0451af5330
                          fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0451af5330
                          
                          
                          1 Reply Last reply Reply Quote 0
                          • M
                            monotypeTattoo
                            last edited by

                            Hi Mazafak,

                            Any chance that you could let us know what model CPUs/chipsets you have reproduced the issue with?
                            Also the ciphers/hash algorithms used?

                            Thank you.

                            I've made a mistake in the initial post. We are using AES256-GCM, not AES256-CBC.

                            1 Reply Last reply Reply Quote 0
                            • M
                              mazafak
                              last edited by

                              I took ipsec settings from:
                              https://docs.netgate.com/pfsense/en/latest/vpn/scaling.html (scroll down to "Optimal Encryption Settings")

                              the supermicro mb is X11SDV-8C-TP8F, that's the one having crashes similar to the dell R430.

                              what is interesting is that on the other side of the ipsec tunnel we have another pfsense running on Super Micro XG-1537. it doesn't have VLAN/LACP setup and it has been rock solid for over a year.

                              so, it could be the VLAN code that's crashing for me. I will attempt upgrading to 2.4.5-p1 once it is available to see if it is any better.

                              1 Reply Last reply Reply Quote 0
                              • M
                                monotypeTattoo
                                last edited by

                                Thank you Mazafak.

                                We had another crash last night:

                                Tracing pid 12 tid 100065 td 0xfffff80004359000
                                kdb_enter() at kdb_enter+0x3b/frame 0xfffffe003e1044a0
                                vpanic() at vpanic+0x19b/frame 0xfffffe003e104500
                                panic() at panic+0x43/frame 0xfffffe003e104560
                                trap_pfault() at trap_pfault/frame 0xfffffe003e1045b0
                                trap_pfault() at trap_pfault+0x49/frame 0xfffffe003e104610
                                trap() at trap+0x29d/frame 0xfffffe003e104720
                                calltrap() at calltrap+0x8/frame 0xfffffe003e104720
                                --- trap 0xc, rip = 0xffffffff80e8127a, rsp = 0xfffffe003e1047f0, rbp = 0xfffffe003e104870 ---
                                ip_input() at ip_input+0x5da/frame 0xfffffe003e104870
                                swi_net() at swi_net+0x143/frame 0xfffffe003e1048e0
                                intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe003e104920
                                ithread_loop() at ithread_loop+0xe7/frame 0xfffffe003e104970
                                fork_exit() at fork_exit+0x83/frame 0xfffffe003e1049b0
                                fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe003e1049b0
                                
                                1 Reply Last reply Reply Quote 0
                                • A
                                  astabing
                                  last edited by

                                  We had very similar crashes on different pfSense 2.4.4 machines along with kernel: [zone: pf frag entries] PF frag entries limit reached messages in logs.

                                  Crashes are gone after Enable MSS clamping on VPN traffic was enabled in IPsec advanced settings. Maybe its your case too ?

                                  M 1 Reply Last reply Reply Quote 0
                                  • M
                                    monotypeTattoo @astabing
                                    last edited by monotypeTattoo

                                    @astabing said in pfSense Active CARP Member Crashed: aesni_process -> crypto_dispatch ...:

                                    We had very similar crashes on different pfSense 2.4.4 machines along with kernel: [zone: pf frag entries] PF frag entries limit reached messages in logs.

                                    Crashes are gone after Enable MSS clamping on VPN traffic was enabled in IPsec advanced settings. Maybe its your case too ?

                                    We've never seen kernel: [zone: pf frag entries] PF frag entries limit reached and we enabled MSS clamping last week to resolve an IPSec throughput issue. We had another crash within 48 hours of making that change, so it didn't resolve it.

                                    We've raised a FreeBSD Bugzilla report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=246951.

                                    Thanks

                                    1 Reply Last reply Reply Quote 0
                                    • M
                                      monotypeTattoo
                                      last edited by

                                      Looks like this may be fixed:

                                      https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=246951#c16

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        mazafak
                                        last edited by

                                        opened https://redmine.pfsense.org/issues/10745
                                        so that we know when this gets applied to pfsense and when we can go back to IPSec.

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post
                                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.