Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    A little support for a home user.

    Scheduled Pinned Locked Moved General pfSense Questions
    50 Posts 4 Posters 3.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • NollipfSenseN
      NollipfSense @badfrogg
      last edited by NollipfSense

      @badfrogg General ... hide public IP! Since you're slow to post log, you can see here: https://forum.netgate.com/topic/137847/realtek-driver-slow-speed-lan-ports-after-realtek-driver and here: https://forum.netgate.com/topic/30212/realtek-8111e-driver-install-works

      pfSense+ 23.09 Lenovo Thinkcentre M93P SFF Quadcore i7 dual Raid-ZFS 128GB-SSD 32GB-RAM PCI-Intel i350-t4 NIC, -Intel QAT 8950.
      pfSense+ 23.09 VM-Proxmox, Dell Precision Xeon-W2155 Nvme 500GB-ZFS 128GB-RAM PCIe-Intel i350-t4, Intel QAT-8950, P-cloud.

      1 Reply Last reply Reply Quote 0
      • B
        badfrogg
        last edited by

        was trying to figure out how to hide IP addresses. Ended up just text editing it

        Last 100 General Log Entries. (Maximum 100)
Apr 9 16:31:43	php-fpm	35914	/index.php: Successful login for user 'xxxxxx' from: xxx.xxx.xxx.xxxx (Local Database)
Apr 9 11:46:37	php-fpm	54423	/rc.start_packages: Restarting/Starting all packages.
Apr 9 11:46:36	check_reload_status		Starting packages
Apr 9 11:46:36	php-fpm	35914	/rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - xxx.xxx.xxx.xxx -> xxx.xxx.xxx.xxx - Restarting packages.
Apr 9 11:46:34	php-fpm	35914	/rc.newwanip: Creating rrd update script
Apr 9 11:46:34	php-fpm	35914	/rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Apr 9 11:46:31	php-fpm	35914	/rc.newwanip: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1586447191] unbound[58203:0] error: bind: address already in use [1586447191] unbound[58203:0] fatal error: could not open ports'
Apr 9 11:46:28	php-fpm	74162	/rc.openvpn: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:46:27	check_reload_status		Reloading filter
Apr 9 11:46:27	check_reload_status		Restarting OpenVPN tunnels/interfaces
Apr 9 11:46:27	check_reload_status		Restarting ipsec tunnels
Apr 9 11:46:27	check_reload_status		updating dyndns WAN_DHCP
Apr 9 11:46:27	rc.gateway_alarm	20717	>>> Gateway alarm: WAN_DHCP (Addr:xxx.xxx.xxx.xxx Alarm:0 RTT:244.715ms RTTsd:667.363ms Loss:0%)
Apr 9 11:46:20	php-fpm	25920	/index.php: Successful login for user 'xxxxxxxx' from: xxx.xxx.xxx.xxx (Local Database)
Apr 9 11:46:13	php-fpm	54423	/rc.openvpn: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:46:12	check_reload_status		Reloading filter
Apr 9 11:46:12	check_reload_status		Restarting OpenVPN tunnels/interfaces
Apr 9 11:46:12	check_reload_status		Restarting ipsec tunnels
Apr 9 11:46:12	check_reload_status		updating dyndns WAN_DHCP
Apr 9 11:46:12	rc.gateway_alarm	22584	>>> Gateway alarm: WAN_DHCP (Addr:xxx.xxx.xxx.xxx Alarm:1 RTT:566.044ms RTTsd:949.119ms Loss:0%)
Apr 9 11:46:05	php-fpm	97409	/rc.openvpn: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:46:04	check_reload_status		Reloading filter
Apr 9 11:46:04	check_reload_status		Restarting OpenVPN tunnels/interfaces
Apr 9 11:46:04	check_reload_status		Restarting ipsec tunnels
Apr 9 11:46:04	check_reload_status		updating dyndns WAN_DHCP6
Apr 9 11:46:04	rc.gateway_alarm	80735	>>> Gateway alarm: WAN_DHCP6 (Addr:xxxx::xxxx:xxxx:xxxx:xxxx%re0 Alarm:1 RTT:0.000ms RTTsd:0.000ms Loss:100%)
Apr 9 11:46:04	check_reload_status		Reloading filter
Apr 9 11:46:04	php-fpm	54423	/rc.newwanipv6: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:46:02	php-fpm	54423	/rc.newwanipv6: Removing static route for monitor xxxx::xxxx:xxxx:xxxx:xxxx and adding a new route through xxxx::xxxx:xxxx:xxxx:xxxx%re0
Apr 9 11:45:56	check_reload_status		Reloading filter
Apr 9 11:45:56	check_reload_status		updating dyndns wan
Apr 9 11:45:56	php-fpm	98286	/rc.openvpn: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:45:55	php-fpm	35914	/rc.newwanip: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:45:55	check_reload_status		Reloading filter
Apr 9 11:45:55	check_reload_status		Restarting OpenVPN tunnels/interfaces
Apr 9 11:45:55	check_reload_status		Restarting ipsec tunnels
Apr 9 11:45:55	check_reload_status		updating dyndns WAN_DHCP6
Apr 9 11:45:55	rc.gateway_alarm	96912	>>> Gateway alarm: WAN_DHCP6 (Addr:xxxx::xxxx:xxxx:xxxx:xxxx%re0 Alarm:1 RTT:0.000ms RTTsd:0.000ms Loss:100%)
Apr 9 11:45:53	php-fpm	54423	/rc.newwanipv6: rc.newwanipv6: on (IP address: xxxx:xxxx:xxxx:xx:xxxx:xxxx:xxxx:xxxx) (interface: wan) (real interface: re0).
Apr 9 11:45:53	php-fpm	54423	/rc.newwanipv6: rc.newwanipv6: Info: starting on re0.
Apr 9 11:45:53	php-fpm	35914	/rc.newwanip: Removing static route for monitor xxxx::xxxx:xxxx:xxxx:xxxx and adding a new route through xxxx::xxxx:xxxx:xxxx:xxxx%re0
Apr 9 11:45:49	rtsold		Starting dhcp6 client for interface wan(re0)
Apr 9 11:45:49	rtsold		Received RA specifying route xxxx::xxxx:xxxx:xxxx:xxxx for interface wan(re0)
Apr 9 11:45:48	check_reload_status		Restarting ipsec tunnels
Apr 9 11:45:48	php-fpm	74162	/rc.linkup: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:45:46	php-fpm	35914	/rc.newwanip: rc.newwanip: on (IP address: xxx.xxx.xxx.xxx) (interface: WAN[wan]) (real interface: re0).
Apr 9 11:45:46	php-fpm	35914	/rc.newwanip: rc.newwanip: Info: starting on re0.
Apr 9 11:45:45	php-fpm	74162	/rc.linkup: Starting rtsold process
Apr 9 11:45:45	php-fpm	74162	/rc.linkup: Accept router advertisements on interface re0
Apr 9 11:45:45	php-fpm	74162	/rc.linkup: calling interface_dhcpv6_configure.
Apr 9 11:45:45	check_reload_status		rc.newwanip starting re0
Apr 9 11:45:45	php-fpm	74162	/rc.linkup: HOTPLUG: Configuring interface wan
Apr 9 11:45:45	php-fpm	74162	/rc.linkup: DEVD Ethernet attached event for wan
Apr 9 11:45:45	check_reload_status		Reloading filter
Apr 9 11:45:45	php-fpm	60799	/rc.linkup: Shutting down Router Advertisment daemon cleanly
Apr 9 11:45:45	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:44	php-fpm	25920	/rc.start_packages: Restarting/Starting all packages.
Apr 9 11:45:44	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:44	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:44	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:43	check_reload_status		Starting packages
Apr 9 11:45:43	php-fpm	98286	/rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - xxx.xxx.xxx.xxx -> xxx.xxx.xxx.xxx - Restarting packages.
Apr 9 11:45:42	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:42	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:42	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:42	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	php-fpm	98286	/rc.newwanip: Creating rrd update script
Apr 9 11:45:41	php-fpm	98286	/rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:41	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on re0
Apr 9 11:45:39	php-fpm	54423	/rc.openvpn: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:45:39	php-fpm	60799	/rc.linkup: DEVD Ethernet detached event for wan
Apr 9 11:45:38	php-fpm	54423	/rc.openvpn: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:45:38	check_reload_status		Reloading filter
Apr 9 11:45:38	check_reload_status		Restarting OpenVPN tunnels/interfaces
Apr 9 11:45:38	check_reload_status		Restarting ipsec tunnels
Apr 9 11:45:38	check_reload_status		updating dyndns WAN_DHCP
Apr 9 11:45:38	rc.gateway_alarm	29155	>>> Gateway alarm: WAN_DHCP (Addr:xxx.xxx.xxx.xxx Alarm:1 RTT:1263.715ms RTTsd:1244.060ms Loss:0%)
Apr 9 11:45:37	php-fpm	97409	/rc.newwanipv6: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Apr 9 11:45:37	check_reload_status		Restarting OpenVPN tunnels/interfaces
Apr 9 11:45:37	check_reload_status		Restarting ipsec tunnels
        NollipfSenseN 1 Reply Last reply Reply Quote 0
        • NollipfSenseN
          NollipfSense @badfrogg
          last edited by

          @badfrogg You did the right thing ... the second thread that I post above address your issue.

          pfSense+ 23.09 Lenovo Thinkcentre M93P SFF Quadcore i7 dual Raid-ZFS 128GB-SSD 32GB-RAM PCI-Intel i350-t4 NIC, -Intel QAT 8950.
          pfSense+ 23.09 VM-Proxmox, Dell Precision Xeon-W2155 Nvme 500GB-ZFS 128GB-RAM PCIe-Intel i350-t4, Intel QAT-8950, P-cloud.

          1 Reply Last reply Reply Quote 0
          • B
            badfrogg
            last edited by

            Looks like you're saying that the Realtek RTL8111E need to have a different driver loaded. That is not something I feel comfortable doing. The router works 99% of the time and that is much better then 0% if I screw it up. Also the original post is from 2009. Will the driver still be compatible?

            Think I will just have to buy a proper router. It would have been cool to make this old scrap work though.

            NollipfSenseN 1 Reply Last reply Reply Quote 0
            • NollipfSenseN
              NollipfSense @badfrogg
              last edited by NollipfSense

              @badfrogg If you can just add an Intel NIC, that's all you need. It appears that you have two empty PCI slots available ... you can add an Intel pro/1000 or i350, cheap on eBay and it's plug & play ... you should be able to handle that ... nothing wrong with the computer, it just has terrible NIC. I would use the PCIe slot and if you can remove the Realtek card that would be great.
              https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2060353.m570.l1313.TR11.TRC1.A0.H0.XIntel+NIC.TRS0&_nkw=Intel+NIC&_sacat=0

              pfSense+ 23.09 Lenovo Thinkcentre M93P SFF Quadcore i7 dual Raid-ZFS 128GB-SSD 32GB-RAM PCI-Intel i350-t4 NIC, -Intel QAT 8950.
              pfSense+ 23.09 VM-Proxmox, Dell Precision Xeon-W2155 Nvme 500GB-ZFS 128GB-RAM PCIe-Intel i350-t4, Intel QAT-8950, P-cloud.

              1 Reply Last reply Reply Quote 0
              • B
                badfrogg
                last edited by badfrogg

                I did finally try this again. I built another system using much better parts...

                
May 31 08:53:17	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on em0
May 31 08:53:17	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on em0
May 31 08:53:17	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on em0
May 31 08:53:17	kernel		arpresolve: can't allocate llinfo for xxx.xxx.xxx.xxx on em0

                And I have pretty much the exact same problem as far as I can tell. Internet drops once or twice a day for a minute or two. I used a dell branded pro / 1000 card (dual) nic card and the mother board is an Intel DQ77KB with an i7-3770S and 16gb ddr3.

                I could not afford to spend money on a new router just yet. I got this stuff out of the recycle bin too.

                If anyone could help it would be awesome.

                1 Reply Last reply Reply Quote 0
                • B
                  badfrogg
                  last edited by badfrogg

                  I searched "arpresolve: can't allocate llinfo for" and I don't think it is a hardware problem. Seems like its is a WAN DHCP thing and some compatibility issue with my cable modem and pfsense. People with Natgate branded boxes are having the same issue. But none of those posts seem to ever result in a clear way of fixing it. Some folks say that buying a static IP or changing ISPs does it. Some say that spoofing the MAC on the WAN does it. Some buy a different modem or change its firmware. Most threads just end in no resolution though.

                  Is pfsense just not meant for residential use?

                  1 Reply Last reply Reply Quote 0
                  • DaddyGoD
                    DaddyGo
                    last edited by

                    Every system is different...but you have looked at some good topics in the forum so far (MAC spoofing, compatibility issue with my cable, etc.)
                    @badfrogg Is pfsense just not meant for residential use?

                    not pfSense is much more serious than that!

                    at what speed do you connect to your modem?
                    (if you find out, turn off auto - negotional)

                    935f07a6-2b34-43ea-8e9e-0256dc653077-image.png

                    Cats bury it so they can't see it!
                    (You know what I mean if you have a cat)

                    1 Reply Last reply Reply Quote 0
                    • B
                      badfrogg
                      last edited by

                      Thanks. I haven't seen that recommended before. Will give it a try.

                      So, what I was asking about pfsense is more along the lines of, is it not meant to be compatible with a residential ISP modems and an ISP with DHCP?

                      1 Reply Last reply Reply Quote 0
                      • DaddyGoD
                        DaddyGo
                        last edited by DaddyGo

                        It's not that simple.
                        PfSense uses generally accepted tested packages for DHCP, but this does not mean that there should be no problems.

                        for example:

                        8f6e13c3-046a-4d67-bf79-73800d82e86d-image.png

                        This is usually not a fault of pfSense
                        rather, ethernet controller to ethernet controller issue (modem eth. port to pfSense WAN interface eth, port

                        edit: many cable ISPs use a MAC ACL
                        plus MAC usability rules can be set up by the ISP (tied to time, frequency, etc.)

                        for you, since this is an intermittent error, ethernet controller compatibility is the possible error

                        Cats bury it so they can't see it!
                        (You know what I mean if you have a cat)

                        1 Reply Last reply Reply Quote 0
                        • B
                          badfrogg
                          last edited by

                          I wish I understood. Regardless, thanks for taking the time to respond. I thought it would be good to play around and DIY a router but it is quite a bit more over my head then I realized.

                          1 Reply Last reply Reply Quote 0
                          • B
                            badfrogg
                            last edited by badfrogg

                            Can I take away from this that it is likely a software issue and that buying a branded Netgate box would likely not fix this problem?

                            DaddyGoD 1 Reply Last reply Reply Quote 0
                            • DaddyGoD
                              DaddyGo
                              last edited by

                              check this, pls:

                              cdfec3eb-7073-470a-b518-59801d0856a5-image.png

                              and try to preserve the speed negotiation
                              by not allowing auto-negotiation

                              Netgate dedicated hardware is a good choice, but it may not solve your problem.
                              The cause must be investigated first...

                              Cats bury it so they can't see it!
                              (You know what I mean if you have a cat)

                              1 Reply Last reply Reply Quote 0
                              • DaddyGoD
                                DaddyGo
                                last edited by DaddyGo

                                and try not to use the Realtek or noname ethernet controller on pfSense interfaces ...
                                use these:

                                Intel I340 / I350 / i210-At / i211 ✋

                                edit: unfortunately, you cannot select the ethernet controller in the ISP CPE (this is given already by ISP) ☹

                                Cats bury it so they can't see it!
                                (You know what I mean if you have a cat)

                                1 Reply Last reply Reply Quote 0
                                • B
                                  badfrogg
                                  last edited by

                                  315622ec-df64-4542-b659-9d9914a45372-image.png ![alt text](image url)

                                  Got it. Will disable auto.

                                  I am using an intel pro/1000 dual card now. But the problem is identical to the old box that ha the Realtek NIC.

                                  Should I disable IPv6?

                                  1 Reply Last reply Reply Quote 0
                                  • DaddyGoD
                                    DaddyGo @badfrogg
                                    last edited by

                                    @badfrogg said in A little support for a home user.:

                                    Can I take away from this that it is likely a software issue and that buying a branded Netgate box would likely not fix this problem?

                                    Definitely NOT a software bug ☺

                                    Cats bury it so they can't see it!
                                    (You know what I mean if you have a cat)

                                    1 Reply Last reply Reply Quote 0
                                    • DaddyGoD
                                      DaddyGo
                                      last edited by DaddyGo

                                      I don't use IPv6 on my home network, it's unnecessary yet, but my service provides it ensure anyway

                                      BTW, I use it in my work as it is needed in those systems...

                                      if you don't need it much IPv6 for something (lot of IoT, etc.), turn it off

                                      Cats bury it so they can't see it!
                                      (You know what I mean if you have a cat)

                                      1 Reply Last reply Reply Quote 0
                                      • B
                                        behemyth
                                        last edited by behemyth

                                        That is an ARP issue - thats what arpresolve is doing i assume. ARP is Layer 2. What interface is EM0? Is that your WAN interface? You can go under interfaces to see what interface that is tied to. I dont know why you would be having an ARP issue between your cable modem and the WAN port, that is really odd.

                                        If you google that error, they talk about that generally means the device cant find its gateway. That is why I'm asking what interface EM0 is. Your using a non-netgate box, so that interface might not be your WAN.

                                        If this interface is not your WAN, then you have the wrong network (IP Space) assigned to that interface. If you have 1.1.1.0/24 assigned to an interface and the gateway is on 1.1.2.0/24, your going to have that exact issue.

                                        1 Reply Last reply Reply Quote 0
                                        • B
                                          badfrogg
                                          last edited by

                                          EM0 is connected to my Cable Modem. EM1 is connected to my home switch.

                                          What do you mean by VM? I have pfsence booting directly from an SSD. It was the serial img.

                                          1 Reply Last reply Reply Quote 0
                                          • B
                                            behemyth
                                            last edited by

                                            Yah I updated my comment. Is your WAN interface using DHCP, or are you assigning a static IP?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.