PC Engines apu2 experiences
-
@kevindd992002 said in PC Engines apu2 experiences:
How's BIOS v4.12.0.1 doing for the one's who tested already?
Until now I cannot find any issue ...
-
@fireodo said in PC Engines apu2 experiences:
@kevindd992002 said in PC Engines apu2 experiences:
How's BIOS v4.12.0.1 doing for the one's who tested already?
Until now I can find any issue ...
Sorry, you can or you can't?
-
@kevindd992002 said in PC Engines apu2 experiences:
@fireodo said in PC Engines apu2 experiences:
@kevindd992002 said in PC Engines apu2 experiences:
How's BIOS v4.12.0.1 doing for the one's who tested already?
Until now I can find any issue ...
Sorry, you can or you can't?
I cannot find any issue :-)
-
Hello
I bought an APU2E4 I have tried to increase the throughput with the help of this website. Supposedly a speed with only 1 connection at about 800Mbit/s and with 2 connections should be about 940 Mbit/s. But I reach with a measurement in LAN (iperf3) with one connection about 350Mbit/s.The following is in loader.conf.local:
hw.igb.rx_process_limit="-1"
hw.igb.tx_process_limit="-1"offloading is unchecked under advanced networking.
website:
https://teklager.se/en/knowledge-base/apu2-1-gigabit-throughput-pfsense/
https://teklager.se/en/knowledge-base/apu-pfsense-throughput-bios-comparison/BIOS: 4.12.0.1
pfsense: 2.4.5What could be the problem here?
-
this has long been out of date https://teklager.se/ !!!
This is the right @kevindd992002 !!!
@kinch Pls, check all offloading (because i210AT = multi - queue ethernet controller
(4 receive queues and 4 transmit queues))Thanks @saltandpepper
edit:
the APU board Coreboot development team (https://3mdeb.com/) isn't specifically focused on FreeBSD, it's more Linux, so wait longer and don't update the BIOS right awayThink about how long it has not been recommended the Mainline releases for FreeBSD (pfSense) only Lagacy was the right way.
-
@DaddyGo said in PC Engines apu2 experiences:
this has long been out of date https://teklager.se/ !!!
This is the right @kevindd992002 !!!
@kinch Pls, check all offloading (because i210AT = multi - queue ethernet controller
(4 receive queues and 4 transmit queues))Thanks @saltandpepper
edit:
the APU board Coreboot development team (https://3mdeb.com/) isn't specifically focused on FreeBSD, it's more Linux, so wait longer and don't update the BIOS right awayThink about how long it has not been recommended the Mainline releases for FreeBSD (pfSense) only Lagacy was the right way.
I'm sorry but which info were you trying to tell me? I don't seem to understand your mention.
-
what do you mean, outdated?
How does his test differ from now? -
Hi,
since then the guys (F.E. - @kevindd992002 ) who actively use the pfSense with APU boards overwritten this tweak ( https://teklager.se/)
our system has nearly 40 pcs. APU4d4s, so I speak from experience as wellwhat you read here ( https://teklager.se/) is just a test and suggestion, since then the experience gained is important, not a blog statement
-
@kevindd992002 I'm just saying that your work is the appropriate guidance
-
@DaddyGo
unfortunately, none of the guys you mentioned posted a speed test. Also the question is not answered, how the boy from https://teklager.se/ could reach these values. -
-
yes, I know but you were mentioned in this post and I passed it on
I didn't want to complicate the thread further with the question of author......... (ERROR on my part)
but you are right, the laurel is his: @dugeemedit: you see how many misconceptions there are about APU
-
@kinch
pls. don't get me wrong, I want to helpdo you want to get first hand results, why is speed the most important thing?
(what kind of speed ISP connection do you have at home, how big is the internal network?)
is it a business or SOHO system you operate?I'm happy to help you, because I know the limits of APU stuff as well (we've been using them for 4 -5 years for "homeworker" colleagues' endpoints)
-
Hi again !
I did every trick you gave me...
Flashed back to Bios V4.10.0.1 - Halt System - Disconnect Power for 30sec.Made changes is loader.conf.local
Made a few tunables (like DaddyGo)
Disabled the offloads
Reboot
Speedtest
Shit
-
Never give up
it’s time to review your entire configuration
can we get a drawing of your system and more information(F.E. ISP, WAN interface type, installed packages, LAN enviroment)
believe me the APU knows a lot in the SOHO categorythe place of the joke:
"the error is in your device"
does not matter anyway, this is a European slangedit: it was missed
-
watch this, this is an APU 4d4 performance (I apologize for the Hungarian language)
yes, I live in lisbon now because
and
what is the lesson
is that it is not impossiblea small dictionary:
letöltés = download
feltöltés = upload
késleltetés = latency
átlag = average
remegés = jitter -
Personally, I got better performance by enabling hardware offload (clear the check boxes).
iPerf on local LAN from pfSense (client) to my NAS (server):
iperf3 -c SERVER_IP_HERE -P 4With Hardware Offload: ~950Mbit/s
Without Hardware Offload: ~450Mbit/s
-
@Veldkornet congratulations, you posted an irrelevant performance number for people trying to configure a router or firewall!
offload can potentially help a client because the client can send a large chunk of data to the NIC at once and then allow the NIC to chop the data into packets and send. offload is useless on a firewall, which must inspect and process packets rather than large chunks of data.
-
@FLOK 92.8Mbps looks suspiciously like you have something negotiating a 100Mbps link. even the original APU could push data faster than that, let alone the APU2, and with no faffing about with configuration settings. you are wasting your time by trying to fine tune your way out of this; put everything back to the default and then find the actual problem.
-
is it:
hw.igb.rx_process_limit="-1"
hw.igb.tx_process_limit="-1"or
hw.igb.rx_process_limit=-1
hw.igb.tx_process_limit=-1is "" needed?
Sorry
