HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile
-
Glad you have it working now.
-Rico
-
Hello everyone. This is my first time in this forum and I found this thread explaining exactly what I was looking for. I don't know much about freeBSD, my previous experiences are only writing code for Arduinos... so a big step for me - literally, I just started yesterday with freebsd CL (please don't yell at me or make fun of me, everybody has to start somewhere)
I'm building a pfsense router (Asus P9D-c4L / e5 1268L V3 / 8GB PC3-10600E / NIC NC523SFP based on Qlogic 8200 // qlxgb driver) to connect to my freeNAS box and ESXI PC. The NIC is supported in both and is recognized automatically.
I currently have 2 VMs running, one pfsense 2.4.4 p1 and the second freeBSD 11.2... I'm staring at both screens and I don't know where to go from here...How do I copy qlxgb.ko from FreeBSD? to what physical/virtual media? how do I copy it to pfsense? how do I open loader.conf.local and add the line? I'm guessing the line is if present, "yes" run the driver.
As basic as it might sound to you, I need to do this to get my home network fully working. If you might point me to a thread where it is more "step-by-step" explained, so I could see the commands used, syntax... I would really appreciate it. Thanks in advance! and thanks to @Rico for sharing the module. I guess I only need to add it to pfsense. But as I said before, I would really like to see all the commands used to achieve it. (learning opportunity for me)
-
a follow up note... correct me if I'm wrong, please.
could I use the file @Rico uploaded and save it to a USB drive and then in pfsense...
mount -t msdosfs /dev/da0s1 /mnt
cp -iprv /dev/da0s1/if_qlxgb.ko /boot/kernel/to enter the new line
vi boot/loader.conf.local
iif_qlxgb_load="YES"
:wq!
so I did it in the VM and it said it created a new file... 1 line 19 characters... So I guess I was successful at creating the conf in the VM... no luck coping qlxgb.ko yet.
Thanks everyone.
-
Hi,
The way I copied the file to the machine was through FileZilla SFTP client. Easy that way.
-
Yeah, SCP or SFTP is the easy way. :-)
-Rico
-
Hey guys! you're the best!!! you deserve a beer... I thought it was going to be something really complicated as building the install from source, but it only took me like 5 minutes to get everything up and running after reading your advice. I used WINSCP so it was pretty much drag and drop.
Thanks @ibysmalls and thanks @Rico -
I followed the above steps, super helpful. Thank you all.
I'm getting the following errors when setting up the interface. I use the following command:
ifconfig ql0 upql0: qla_init_rcv_cntxt: Q8_CMD_CREATE_RX_CNTXT failed
ql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000012
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x000005ee
arg3[0x001b2224] = 0x00000000
ql0: qla_issue_cmd: exit (ret = 0xffffffff)
rsp = 0x80000012
arg1 = 0x00000000
arg2 = 0x000005ee
arg3 = 0x00000000
ql0: qla_set_max_mtu: Q8_CMD_RD_MAX_MTU failedql0: qla_issue_cmd: cmd[0x001b2218] = 0x80000002
sig[0x001b2228] = 0xcafe0100
arg1[0x001b221c] = 0x00000000
arg2[0x001b2220] = 0x00000000
arg3[0x001b2224] = 0x00000000ifconfig yields the followings results with a DAC plugged in and connected to my SFP+ switch
ql0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 2c:59:e5:xx:xx:xx
hwaddr 2c:59:e5:xx:xx:xx
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
ql1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether 2c:59:e5:xx:xx:xx
hwaddr 2c:59:e5:xx:xx:xx
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrierAny thoughts about possible issues? What version of firmware is your card using?
-
@homelabber Try doing
Go To System >> Advance >> System Tunables >> add new
Tunables : if_qlxgb_load
Value: YES
Discription : SFP+ (or anything you can remember)
Save
After this go to the interface and set the mtu = 9000Also read [FreeBSD Manual Pages QLXGB(4)] (https://www.freebsd.org/cgi/man.cgi?query=qlxgb&sektion=4&manpath=FreeBSD+12.1-RELEASE+and+Ports)
-
@pragalbh said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
Go To System >> Advance >> System Tunables >> add new
Tunables : if_qlxgb_load
Value: YESThat won't work there, it's a loader varialble you need to put it in /boot/loader.conf.local as @dotdash described above.
The system tunables section there is for sysctls, it equates to sysctl.conf in FreeBSD.
Steve
-
In 2.4.5-p1:
Added support for QLogic 10Gbit/s Ethernet interfaces (qlxgb)https://www.netgate.com/blog/pfsense-2-4-5-release-p1-now-available.html
-
I have this card installed in pfSense 2.4.5-RELEASE-p1 (amd64) but unfortunately I get for both Lan Interfaces lq0 and lq1 "No-Carrier" and status down. Though the bios and also pfSense recognize the card and the driver also seems to be loaded.
Can anybody help me to get this card working?
Output following commands
: sysctl kern.conftxt | grep qlx
device qlxgb
: strings /boot/kernel/kernel | grep qlxgb
device qlxgb
: kldstat -v | grep qla80xx
637 pci/qla80xx: ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether a8:a1:59:27:d2:04
hwaddr a8:a1:59:27:d2:04
inet6 fe80::aaa1:59ff:fe27:d204%re0 prefixlen 64 scopeid 0x1
inet 192.168.1.80 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
ether a0:1d:48:98:02:78
hwaddr a0:1d:48:98:02:78
inet6 fe80::a21d:48ff:fe98:278%ql0 prefixlen 64 scopeid 0x2
inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
ql1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
ether a0:1d:48:98:02:7c
hwaddr a0:1d:48:98:02:7c
inet6 fe80::a21d:48ff:fe98:27c%ql1 prefixlen 64 scopeid 0x3
inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
enc0: flags=0<> metric 0 mtu 1536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: enc
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
pfsync0: flags=0<> metric 0 mtu 1500
groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33160
groups: pflog
ue0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:e0:4a:68:95:52
hwaddr 00:e0:4a:68:95:52
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> -
Try running
ifconfig -vvvm ql0when it's connected.Does the card itself show link? Does whatever it's attached to?
Steve
-
@stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
Try running
ifconfig -vvvm ql0when it's connected.Does the card itself show link? Does whatever it's attached to? What do you mean by that? No link light (only briefly on during boot, but than switches off) For testing connected to media > rj45 converter, also nothing happens. By the way I gave 3 of those cards, each of them same result
Steve
Hello Steve
What do you mean with "Does the card itself show link?" No link light (only on during boot, but than switches off) For testing connected to media > rj45 converter, also nothing happens. By the way I gave 3 of those cards, each of them same resultpfSense Interfaces Status
Status
no carrier
MAC Address
a0:1d:48:98:02:78
IPv4 Address
192.168.10.1
Subnet mask IPv4
255.255.255.0
IPv6 Link Local
fe80::a21d:48ff:fe98:278%ql0
MTU
1500
Media
autoselect
In/out packets
0/1 (0 B/76 B)
In/out packets (pass)
0/1 (0 B/76 B)
In/out packets (block)
0/0 (0 B/0 B)
In/out errors
0/0
Collisions
0ifconfig -vvvm ql0
ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
capabilities=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether a0:1d:48:98:02:78
hwaddr a0:1d:48:98:02:78
inet6 fe80::a21d:48ff:fe98:278%ql0 prefixlen 64 scopeid 0x2
inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
supported media:
media autoselect
media 10Gbase-SR mediaopt full-duplexMaarten
-
@maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
media 10Gbase-SR mediaopt full-duplex
Hmm, it only shows 10Gbase-SR as an available connection and you're trying to use 10Gbase-T.
If you try a different SFP+ module in the NIC does it show any other available link types? Or any further info from the module?
It may just not be compatible with 10Gbase-T modules.
Steve
-
@stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
@maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
media 10Gbase-SR mediaopt full-duplex
Hmm, it only shows 10Gbase-SR as an available connection and you're trying to use 10Gbase-T.
If you try a different SFP+ module in the NIC does it show any other available link types? Or any further info from the module?
It may just not be compatible with 10Gbase-T modules.
Steve
Hello Steve,Thanks for your help. I was under the impression that DAC cables with 10G sfp+ Modules (for short distances) were compatible with 10Gbase-SR and the this NIC can handle both 1Gb (because the media converter that I bought for testing can only do 1Gb) and 10Gb. (because I thought the only difference is that copper is used instead of fiber). So am I wrong and must the NIC itself also be 10Gbase-T compatible?
Quite complex (for a newbie) all these different cables and modules for 10G sfp+ NIC's Also it is interesting to see that the DAC cable works fine between two Media Converters (I have two of them) So probably you are right and is the NIC not 10Gbase-T compatible and now I am curious if the Media Converters will be 10Gbase-SR compatible?Anyway I will buy 10Gbase-SR modules and see what happens than. I will keep you informed.
Maarten
-
@maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
It may just not be compatible with 10Gbase-T modules.
Thinking about it, most likely is that the media converters are the problem, not the DAC cable because I also received a Cisco SFP H10GB CU cable together with one of the NICS, so I suppose that should work. Tomorrow I will receive a new computer on which I will install Freebsd or Linux and one of the other NIC's and connect the pfSense box directly to this new computer.
-
Ah sorry, I thought you meant SFP+ RJ-45 modules but in fact you mean separate media converters?
I would also expect those to work with DAC cables though maybe not at 1G. That often requires setting the link speed manually and it doesn't appear to be giving you that option.
I would still try some different modules in there to see if it reports anything different.
You could also try just linking the two QK NICs with a DAC cable directly just to see if they do then link and what media the driver reports.
Steve
-
@stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:
You could also try just linking the two QK NICs with a DAC cable directly just to see if they do then link and what media the driver reports.
Hello Stephen,
I installed a second pc and connected pfSense with the linux guest pc (Both with an HP Qlogic NC523SFP nic) and now both interfaces are up. (also the port lights of both nics are burning) It seems that the problem was with the media converter.
Nevertheless I get no connection between pfSense and the guest pc. On pfSense I continuously get the following error
Jul 29 19:28:47 pfSense kernel: ql0: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS)
Jul 29 19:28:47 pfSense kernel: ql0: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start
Jul 29 19:28:47 pfSense kernel: ql0: 0x00000000: c4 34 6b cc b1 f0 c4 34 6b cc f9 e0 08 06 00 01
Jul 29 19:28:47 pfSense kernel: ql0: 0x00000010: 08 00 06 04 00 02 c4 34 6b cc f9 e0 c0 a8 0a 01
Jul 29 19:28:47 pfSense kernel: ql0: 0x00000020: c4 34 6b cc b1 f0 c0 a8 0a 0b
Jul 29 19:28:47 pfSense kernel: ql0: qla_dump_buf8: qla_hw_send: wrong pkt dump endThe above message stops when I assign a static ip address (in the correct ip range! Because the guest pc keeps searching for a dhcp address) but I still don't get a Lan connection. Also Status/DHCP Leases in pfSense stay empty though I Enabled DHCP server on LAN interface
Both nics are set to 10Gb full duplex (the guest pc manually) And the hardware of both pfSense and the guest PC is 100% identical.
Shell Output - ifconfig -vvvm ql0
ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
capabilities=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
ether c4:34:6b:cc:f9:e0
hwaddr c4:34:6b:cc:f9:e0
inet6 fe80::c634:6bff:fecc:f9e0%ql0 prefixlen 64 scopeid 0x2
inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet 10Gbase-SR <full-duplex>
status: active
supported media:
media autoselect
media 10Gbase-SR mediaopt full-duplexAnd this is dmesg.boot
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020
root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.33-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 14359818240 (13694 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1796665086 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806a2f20, 0) error 1
wlan: mac acl policy registered
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806a2fd0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806a3080, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806ca140, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806ca1f0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806ca2a0, 0) error 1
kbd1 at kbdmux0
000.000022 [4213] netmap_init netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff812d9960, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc9a0000-0xfc9a7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfc980000-0xfc99ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 29 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfc800000-0xfc800fff,0xf0300000-0xf0303fff irq 29 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: a8:a1:59:27:d2:04
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci2
pci5: <ACPI PCI bus> on pcib5
ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfc400000-0xfc5fffff,0xfc690000-0xfc69ffff irq 28 at device 0.0 on pci5
ql0: qla_pci_attach: firmware[4.20.1.1429931003]
ql0: Ethernet address: c4:34:6b:cc:f9:e0
ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfc200000-0xfc3fffff,0xfc680000-0xfc68ffff irq 28 at device 0.1 on pci5
ql1: qla_pci_attach: firmware[4.20.1.1429931003]
ql1: Ethernet address: c4:34:6b:cc:f9:e4
pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcd00000-0xfcd7ffff irq 52 at device 0.0 on pci6
vgapci0: Boot video device
hdac0: <ATI (0x15de) HDA Controller> mem 0xfcd88000-0xfcd8bfff irq 53 at device 0.1 on pci6
pci6: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcb00000-0xfcbfffff irq 55 at device 0.3 on pci6
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff irq 52 at device 0.4 on pci6
xhci2: 64 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfcd80000-0xfcd87fff irq 54 at device 0.6 on pci6
pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci7: <ACPI PCI bus> on pcib7
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 54 at device 0.0 on pci7
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich8: <AHCI channel> at channel 0 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC892 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm4: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen2.1: <0x1022 XHCI root HUB> at usbus2
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub0: 8 ports with 8 removable, self powered
uhub2: 22 ports with 22 removable, self powered
ugen0.2: <USB USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
kbd2 at ukbd0
uhid0 on uhub2
uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST250DM000-1BD141 KC48> ATA8-ACS SATA 3.x device
ada0: Serial Number Z6EK74HT
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST250DM000-1BD141 KC48> ATA8-ACS SATA 3.x device
ada1: Serial Number Z6EK54KD
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors)
ada1: quirks=0x1<4K>
random: unblocking device.
Trying to mount root from zfs:FW02/ROOT/default []...
CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.33-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics -
Some hardware off loading error maybe? Make sure that are all disabled in Sys > Adv > Networking.
Otherwise that's probably a question for the FreeBSD forum. There are likely many more people running those NICs there.
This looks relevant: https://www.reddit.com/r/freenas/comments/957hz0/hp_nc523sfp_10gb/
Steve
-
Hello Stephen
It seems to be a bug: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=226217
also they show how that bug can be fixed and as I am not a programmer I don't how to do that.But luckily there is also a simple workaround for it: First take out the cable(s) and do: ifconfig ql0 & ql1 mtu 1500 and that works fine, I get a connection!
Now I am putting these commands in /boot/loader.conf.local and will check if this also works. I will let you know
