Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    31 Posts 9 Posters 9.8k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • viktor_gV
      viktor_g Netgate
      last edited by

      In 2.4.5-p1:
      Added support for QLogic 10Gbit/s Ethernet interfaces (qlxgb)

      https://www.netgate.com/blog/pfsense-2-4-5-release-p1-now-available.html

      1 Reply Last reply Reply Quote 2
      • M
        maartenv
        last edited by

        I have this card installed in pfSense 2.4.5-RELEASE-p1 (amd64) but unfortunately I get for both Lan Interfaces lq0 and lq1 "No-Carrier" and status down. Though the bios and also pfSense recognize the card and the driver also seems to be loaded.

        Can anybody help me to get this card working?

        Output following commands
        : sysctl kern.conftxt | grep qlx
        device qlxgb
        : strings /boot/kernel/kernel | grep qlxgb
        device qlxgb
        : kldstat -v | grep qla80xx
        637 pci/qla80xx

        : ifconfig
        re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether a8:a1:59:27:d2:04
        hwaddr a8:a1:59:27:d2:04
        inet6 fe80::aaa1:59ff:fe27:d204%re0 prefixlen 64 scopeid 0x1
        inet 192.168.1.80 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
        ether a0:1d:48:98:02:78
        hwaddr a0:1d:48:98:02:78
        inet6 fe80::a21d:48ff:fe98:278%ql0 prefixlen 64 scopeid 0x2
        inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
        ql1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
        ether a0:1d:48:98:02:7c
        hwaddr a0:1d:48:98:02:7c
        inet6 fe80::a21d:48ff:fe98:27c%ql1 prefixlen 64 scopeid 0x3
        inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
        enc0: flags=0<> metric 0 mtu 1536
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: enc
        lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
        pfsync0: flags=0<> metric 0 mtu 1500
        groups: pfsync
        pflog0: flags=100<PROMISC> metric 0 mtu 33160
        groups: pflog
        ue0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:e0:4a:68:95:52
        hwaddr 00:e0:4a:68:95:52
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Try running ifconfig -vvvm ql0 when it's connected.

          Does the card itself show link? Does whatever it's attached to?

          Steve

          1 Reply Last reply Reply Quote 0
          • M
            maartenv
            last edited by

            @stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

            Try running ifconfig -vvvm ql0 when it's connected.

            Does the card itself show link? Does whatever it's attached to? What do you mean by that? No link light (only briefly on during boot, but than switches off) For testing connected to media > rj45 converter, also nothing happens. By the way I gave 3 of those cards, each of them same result

            Steve

            Hello Steve
            What do you mean with "Does the card itself show link?" No link light (only on during boot, but than switches off) For testing connected to media > rj45 converter, also nothing happens. By the way I gave 3 of those cards, each of them same result

            pfSense Interfaces Status
            Status
            no carrier
            MAC Address
            a0:1d:48:98:02:78
            IPv4 Address
            192.168.10.1
            Subnet mask IPv4
            255.255.255.0
            IPv6 Link Local
            fe80::a21d:48ff:fe98:278%ql0
            MTU
            1500
            Media
            autoselect
            In/out packets
            0/1 (0 B/76 B)
            In/out packets (pass)
            0/1 (0 B/76 B)
            In/out packets (block)
            0/0 (0 B/0 B)
            In/out errors
            0/0
            Collisions
            0

            ifconfig -vvvm ql0

            ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
            options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
            capabilities=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
            ether a0:1d:48:98:02:78
            hwaddr a0:1d:48:98:02:78
            inet6 fe80::a21d:48ff:fe98:278%ql0 prefixlen 64 scopeid 0x2
            inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
            nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
            media: Ethernet autoselect
            status: no carrier
            supported media:
            media autoselect
            media 10Gbase-SR mediaopt full-duplex

            Maarten

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              @maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

              media 10Gbase-SR mediaopt full-duplex

              Hmm, it only shows 10Gbase-SR as an available connection and you're trying to use 10Gbase-T.

              If you try a different SFP+ module in the NIC does it show any other available link types? Or any further info from the module?

              It may just not be compatible with 10Gbase-T modules.

              Steve

              M 1 Reply Last reply Reply Quote 0
              • M
                maartenv @stephenw10
                last edited by

                @stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

                @maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

                media 10Gbase-SR mediaopt full-duplex

                Hmm, it only shows 10Gbase-SR as an available connection and you're trying to use 10Gbase-T.

                If you try a different SFP+ module in the NIC does it show any other available link types? Or any further info from the module?

                It may just not be compatible with 10Gbase-T modules.

                Steve
                Hello Steve,

                Thanks for your help. I was under the impression that DAC cables with 10G sfp+ Modules (for short distances) were compatible with 10Gbase-SR and the this NIC can handle both 1Gb (because the media converter that I bought for testing can only do 1Gb) and 10Gb. (because I thought the only difference is that copper is used instead of fiber). So am I wrong and must the NIC itself also be 10Gbase-T compatible?
                Quite complex (for a newbie) all these different cables and modules for 10G sfp+ NIC's Also it is interesting to see that the DAC cable works fine between two Media Converters (I have two of them) So probably you are right and is the NIC not 10Gbase-T compatible and now I am curious if the Media Converters will be 10Gbase-SR compatible?

                Anyway I will buy 10Gbase-SR modules and see what happens than. I will keep you informed.

                Maarten

                M 1 Reply Last reply Reply Quote 0
                • M
                  maartenv @maartenv
                  last edited by

                  @maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

                  It may just not be compatible with 10Gbase-T modules.

                  Thinking about it, most likely is that the media converters are the problem, not the DAC cable because I also received a Cisco SFP H10GB CU cable together with one of the NICS, so I suppose that should work. Tomorrow I will receive a new computer on which I will install Freebsd or Linux and one of the other NIC's and connect the pfSense box directly to this new computer.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Ah sorry, I thought you meant SFP+ RJ-45 modules but in fact you mean separate media converters?

                    I would also expect those to work with DAC cables though maybe not at 1G. That often requires setting the link speed manually and it doesn't appear to be giving you that option.

                    I would still try some different modules in there to see if it reports anything different.

                    You could also try just linking the two QK NICs with a DAC cable directly just to see if they do then link and what media the driver reports.

                    Steve

                    M 1 Reply Last reply Reply Quote 0
                    • M
                      maartenv @stephenw10
                      last edited by

                      @stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

                      You could also try just linking the two QK NICs with a DAC cable directly just to see if they do then link and what media the driver reports.

                      Hello Stephen,

                      I installed a second pc and connected pfSense with the linux guest pc (Both with an HP Qlogic NC523SFP nic) and now both interfaces are up. (also the port lights of both nics are burning) It seems that the problem was with the media converter.

                      Nevertheless I get no connection between pfSense and the guest pc. On pfSense I continuously get the following error

                      Jul 29 19:28:47 pfSense kernel: ql0: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS)
                      Jul 29 19:28:47 pfSense kernel: ql0: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start
                      Jul 29 19:28:47 pfSense kernel: ql0: 0x00000000: c4 34 6b cc b1 f0 c4 34 6b cc f9 e0 08 06 00 01
                      Jul 29 19:28:47 pfSense kernel: ql0: 0x00000010: 08 00 06 04 00 02 c4 34 6b cc f9 e0 c0 a8 0a 01
                      Jul 29 19:28:47 pfSense kernel: ql0: 0x00000020: c4 34 6b cc b1 f0 c0 a8 0a 0b
                      Jul 29 19:28:47 pfSense kernel: ql0: qla_dump_buf8: qla_hw_send: wrong pkt dump end

                      The above message stops when I assign a static ip address (in the correct ip range! Because the guest pc keeps searching for a dhcp address) but I still don't get a Lan connection. Also Status/DHCP Leases in pfSense stay empty though I Enabled DHCP server on LAN interface

                      Both nics are set to 10Gb full duplex (the guest pc manually) And the hardware of both pfSense and the guest PC is 100% identical.

                      Shell Output - ifconfig -vvvm ql0
                      ql0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
                      options=8003b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,LINKSTATE>
                      capabilities=8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKSTATE>
                      ether c4:34:6b:cc:f9:e0
                      hwaddr c4:34:6b:cc:f9:e0
                      inet6 fe80::c634:6bff:fecc:f9e0%ql0 prefixlen 64 scopeid 0x2
                      inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
                      nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
                      media: Ethernet 10Gbase-SR <full-duplex>
                      status: active
                      supported media:
                      media autoselect
                      media 10Gbase-SR mediaopt full-duplex

                      And this is dmesg.boot
                      Copyright (c) 1992-2020 The FreeBSD Project.
                      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                      The Regents of the University of California. All rights reserved.
                      FreeBSD is a registered trademark of The FreeBSD Foundation.
                      FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020
                      root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64
                      FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
                      VT(vga): resolution 640x480
                      CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.33-MHz K8-class CPU)
                      Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
                      Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
                      Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
                      AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
                      AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
                      Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
                      XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
                      AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
                      SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
                      TSC: P-state invariant, performance statistics
                      real memory = 17179869184 (16384 MB)
                      avail memory = 14359818240 (13694 MB)
                      Event timer "LAPIC" quality 600
                      ACPI APIC Table: <ALASKA A M I >
                      FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                      FreeBSD/SMP: 1 package(s) x 4 core(s)
                      ioapic0 <Version 2.1> irqs 0-23 on motherboard
                      ioapic1 <Version 2.1> irqs 24-55 on motherboard
                      SMP: AP CPU #2 Launched!
                      SMP: AP CPU #1 Launched!
                      SMP: AP CPU #3 Launched!
                      Timecounter "TSC-low" frequency 1796665086 Hz quality 1000
                      random: entropy device external interface
                      ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                      ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806a2f20, 0) error 1
                      wlan: mac acl policy registered
                      ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                      ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806a2fd0, 0) error 1
                      ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
                      ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806a3080, 0) error 1
                      iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                      iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806ca140, 0) error 1
                      iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                      iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806ca1f0, 0) error 1
                      iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
                      iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806ca2a0, 0) error 1
                      kbd1 at kbdmux0
                      000.000022 [4213] netmap_init netmap: loaded module
                      module_register_init: MOD_LOAD (vesa, 0xffffffff812d9960, 0) error 19
                      random: registering fast source Intel Secure Key RNG
                      random: fast provider: "Intel Secure Key RNG"
                      mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
                      nexus0
                      vtvga0: <VT VGA driver> on motherboard
                      cryptosoft0: <software crypto> on motherboard
                      padlock0: No ACE support.
                      acpi0: <ALASKA A M I > on motherboard
                      acpi0: Power Button (fixed)
                      cpu0: <ACPI CPU> on acpi0
                      cpu1: <ACPI CPU> on acpi0
                      cpu2: <ACPI CPU> on acpi0
                      cpu3: <ACPI CPU> on acpi0
                      attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
                      Timecounter "i8254" frequency 1193182 Hz quality 0
                      Event timer "i8254" frequency 1193182 Hz quality 100
                      atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
                      atrtc0: registered as a time-of-day clock, resolution 1.000000s
                      Event timer "RTC" frequency 32768 Hz quality 0
                      hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
                      Timecounter "HPET" frequency 14318180 Hz quality 950
                      Event timer "HPET" frequency 14318180 Hz quality 450
                      Event timer "HPET1" frequency 14318180 Hz quality 450
                      Event timer "HPET2" frequency 14318180 Hz quality 450
                      Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
                      acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                      pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
                      pcib0: _OSC returned error 0x10
                      pci0: <ACPI PCI bus> on pcib0
                      pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
                      pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
                      pci1: <ACPI PCI bus> on pcib1
                      xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc9a0000-0xfc9a7fff irq 28 at device 0.0 on pci1
                      xhci0: 32 bytes context size, 64-bit DMA
                      xhci0: Unable to map MSI-X table
                      usbus0 on xhci0
                      usbus0: 5.0Gbps Super Speed USB v3.0
                      ahci0: <AHCI SATA controller> mem 0xfc980000-0xfc99ffff irq 29 at device 0.1 on pci1
                      ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
                      ahcich0: <AHCI channel> at channel 0 on ahci0
                      ahcich1: <AHCI channel> at channel 1 on ahci0
                      ahcich4: <AHCI channel> at channel 4 on ahci0
                      ahcich5: <AHCI channel> at channel 5 on ahci0
                      pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
                      pci2: <ACPI PCI bus> on pcib2
                      pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
                      pci3: <ACPI PCI bus> on pcib3
                      pcib4: <ACPI PCI-PCI bridge> irq 29 at device 1.0 on pci2
                      pci4: <ACPI PCI bus> on pcib4
                      re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfc800000-0xfc800fff,0xf0300000-0xf0303fff irq 29 at device 0.0 on pci4
                      re0: Using 1 MSI-X message
                      re0: Chip rev. 0x4c000000
                      re0: MAC rev. 0x00000000
                      miibus0: <MII bus> on re0
                      rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
                      rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
                      re0: Using defaults for TSO: 65518/35/2048
                      re0: Ethernet address: a8:a1:59:27:d2:04
                      re0: netmap queues/slots: TX 1/256, RX 1/256
                      pcib5: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci2
                      pci5: <ACPI PCI bus> on pcib5
                      ql0: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfc400000-0xfc5fffff,0xfc690000-0xfc69ffff irq 28 at device 0.0 on pci5
                      ql0: qla_pci_attach: firmware[4.20.1.1429931003]
                      ql0: Ethernet address: c4:34:6b:cc:f9:e0
                      ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfc200000-0xfc3fffff,0xfc680000-0xfc68ffff irq 28 at device 0.1 on pci5
                      ql1: qla_pci_attach: firmware[4.20.1.1429931003]
                      ql1: Ethernet address: c4:34:6b:cc:f9:e4
                      pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0
                      pci6: <ACPI PCI bus> on pcib6
                      vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcd00000-0xfcd7ffff irq 52 at device 0.0 on pci6
                      vgapci0: Boot video device
                      hdac0: <ATI (0x15de) HDA Controller> mem 0xfcd88000-0xfcd8bfff irq 53 at device 0.1 on pci6
                      pci6: <encrypt/decrypt> at device 0.2 (no driver attached)
                      xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcb00000-0xfcbfffff irq 55 at device 0.3 on pci6
                      xhci1: 64 bytes context size, 64-bit DMA
                      xhci1: Unable to map MSI-X table
                      usbus1 on xhci1
                      usbus1: 5.0Gbps Super Speed USB v3.0
                      xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff irq 52 at device 0.4 on pci6
                      xhci2: 64 bytes context size, 64-bit DMA
                      xhci2: Unable to map MSI-X table
                      usbus2 on xhci2
                      usbus2: 5.0Gbps Super Speed USB v3.0
                      hdac1: <AMD (0x15e3) HDA Controller> mem 0xfcd80000-0xfcd87fff irq 54 at device 0.6 on pci6
                      pcib7: <ACPI PCI-PCI bridge> at device 8.2 on pci0
                      pci7: <ACPI PCI bus> on pcib7
                      ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 54 at device 0.0 on pci7
                      ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
                      ahcich8: <AHCI channel> at channel 0 on ahci1
                      isab0: <PCI-ISA bridge> at device 20.3 on pci0
                      isa0: <ISA bus> on isab0
                      acpi_button0: <Power Button> on acpi0
                      uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                      atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
                      atkbd0: <AT Keyboard> irq 1 on atkbdc0
                      kbd0 at atkbd0
                      atkbd0: [GIANT-LOCKED]
                      ppc0: cannot reserve I/O port range
                      hwpstate0: <Cool`n'Quiet 2.0> on cpu0
                      ZFS filesystem version: 5
                      ZFS storage pool version: features support (5000)
                      Timecounters tick every 1.000 msec
                      hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
                      hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
                      pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
                      pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
                      pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
                      hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
                      hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
                      pcm3: <Realtek ALC892 (Rear Analog)> at nid 20 and 24,26 on hdaa1
                      pcm4: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
                      ugen1.1: <0x1022 XHCI root HUB> at usbus1
                      ugen0.1: <0x1022 XHCI root HUB> at usbus0
                      ugen2.1: <0x1022 XHCI root HUB> at usbus2
                      uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
                      uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
                      uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
                      uhub1: 2 ports with 2 removable, self powered
                      uhub0: 8 ports with 8 removable, self powered
                      uhub2: 22 ports with 22 removable, self powered
                      ugen0.2: <USB USB Keyboard> at usbus0
                      ukbd0 on uhub2
                      ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
                      kbd2 at ukbd0
                      uhid0 on uhub2
                      uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
                      ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
                      ada0: <ST250DM000-1BD141 KC48> ATA8-ACS SATA 3.x device
                      ada0: Serial Number Z6EK74HT
                      ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
                      ada0: Command Queueing enabled
                      ada0: 238475MB (488397168 512 byte sectors)
                      ada0: quirks=0x1<4K>
                      ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
                      ada1: <ST250DM000-1BD141 KC48> ATA8-ACS SATA 3.x device
                      ada1: Serial Number Z6EK54KD
                      ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
                      ada1: Command Queueing enabled
                      ada1: 238475MB (488397168 512 byte sectors)
                      ada1: quirks=0x1<4K>
                      random: unblocking device.
                      Trying to mount root from zfs:FW02/ROOT/default []...
                      CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.33-MHz K8-class CPU)
                      Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
                      Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
                      Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
                      AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
                      AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
                      Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
                      XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
                      AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
                      SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
                      TSC: P-state invariant, performance statistics

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by stephenw10

                        Some hardware off loading error maybe? Make sure that are all disabled in Sys > Adv > Networking.

                        Otherwise that's probably a question for the FreeBSD forum. There are likely many more people running those NICs there.

                        This looks relevant: https://www.reddit.com/r/freenas/comments/957hz0/hp_nc523sfp_10gb/

                        Steve

                        M 1 Reply Last reply Reply Quote 0
                        • M
                          maartenv @stephenw10
                          last edited by

                          @stephenw10

                          Hello Stephen

                          It seems to be a bug: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=226217
                          also they show how that bug can be fixed and as I am not a programmer I don't how to do that.

                          But luckily there is also a simple workaround for it: First take out the cable(s) and do: ifconfig ql0 & ql1 mtu 1500 and that works fine, I get a connection! 😊

                          Now I am putting these commands in /boot/loader.conf.local and will check if this also works. I will let you know

                          M 1 Reply Last reply Reply Quote 0
                          • M
                            maartenv @maartenv
                            last edited by

                            @maartenv said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

                            Now I am putting these commands in /boot/loader.conf.local and will check if this also works. I will let you know

                            Unfortunately loading these commands don't work with /boot/loader.conf.local

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by stephenw10

                              Yeah, those are not boot loader commands.

                              You might be able to run them as early shellcmds either directly or call a shell script:
                              https://docs.netgate.com/pfsense/en/latest/development/executing-commands-at-boot-time.html

                              They have to be run with the cable actually disconnected? Not just DOWN the interface?

                              M 1 Reply Last reply Reply Quote 0
                              • M
                                maartenv @stephenw10
                                last edited by

                                @stephenw10 said in HP Qlogic NC523SFP Driver install Freebsd 11 pfsense kernal recompile:

                                Yeah, those are not boot loader commands.

                                You might be able to run them as early shellcmds either directly or call a shell script:
                                https://docs.netgate.com/pfsense/en/latest/development/executing-commands-at-boot-time.html

                                They have to be run with the cable actually disconnected? Not just DOWN the interface?

                                You are probably right, but I did not yet try that. Also I will try to find the source file with the bugs on FreeBSD, change the lines with the bugs, compile the file and than copy the new file to pfSense.
                                I will keep you informed about both solutions

                                Maarten

                                1 Reply Last reply Reply Quote 1
                                • bingo600B bingo600 referenced this topic on
                                • bingo600B bingo600 referenced this topic on
                                • First post
                                  Last post
                                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.