Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] First installation, but PC no longer connects

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    30 Posts 4 Posters 3.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GertjanG
      Gertjan @WhiteTiger-IT
      last edited by

      @WhiteTiger-IT said in First installation, but PC no longer connects:

      I noticed that on both PCs an address is not assigned by the pfSense DHCP Server.

      If these PC's do not have their default network setup (DHCP) then you have to setup up on these PC's the correct "IP" information (IP, mask, gateway, DNS - these 4 are all important). Which is non-advisable.
      Leave everything to default is always the best way ;)

      pfSense, behaves like any other router you can find on planet earth : when you unbox them, it works.
      True : a WAN and LAN interface has to be assigned, because it can't know on what device you are running it, when it wakes up for the very first time. Up to you to hook up your internal network to LAN, and the upstream connection to WAN NIC.

      No "help me" PM's please. Use the forum, the community will thank you.
      Edit : and where are the logs ??

      W 2 Replies Last reply Reply Quote 0
      • W
        WhiteTiger-IT @Gertjan
        last edited by WhiteTiger-IT

        @Gertjan
        As I wrote, it works neither with DHCP nor with static IP.
        Obviously with the static IP the values IP, Mask, DNS and Gateway are correct.

        As for the assignment of the interfaces it is not difficult.
        I disconnect the three cables, launch the "auto" and then connect the single cable.
        This is for each one of the three cables.

        The red cable goes to the router.
        The green cable goes to the switch where the two PCs are connected
        The yellow cable goes to a second switch where nothing is currently connected.

        So, I can't go wrong, nor do I assign cables to the interfaces, nor do I assign cables to the router and the two switches.

        During the various installations I made, however, I noticed that pfSense randomly assigns the re0, re1, re2 cards.
        Once they are connected in one way and another time they are connected in a different way.
        I am therefore obliged to do the manual assignment to avoid problems and confusion.
        For this reason I am sure that the assignment is correct.

        ==== Update ====
        I solved the problem.

        On the PC of pfSense I installed Xubuntu indicating to take the whole disk.
        Then I installed pfSense again, always taking the whole disk.
        Now I can connect to 192.168.1.1

        I wonder if with the first installation something was saved that then remained on the disk even with the "reset to default factory" and with the (old) new installation of pfSense.
        Something that has been erased using the entire disk for something else, Xubuntu in my case.

        Or is it just a coincidence?

        GertjanG 1 Reply Last reply Reply Quote 0
        • GertjanG
          Gertjan @WhiteTiger-IT
          last edited by Gertjan

          @WhiteTiger-IT said in First installation, but PC no longer connects:

          During the various installations I made, however, I noticed that pfSense randomly assigns the re0, re1, re2 cards.
          Once they are connected in one way and another time they are connected in a different way.
          I am therefore obliged to do the manual assignment to avoid problems and confusion.
          For this reason I am sure that the assignment is correct.

          Scary.
          If the kernel detects interface on a subsequent boot in another order : then known interfaces will get assigned teh other way around. LAN becomes WAN ,etc which is a big security issue.
          Such a situation should never happen.

          But you're using "re" or Raaeltek NIC's. This forum is loaded with issues with NIC's : mostly Realtek ones, they are are then famous for this.

          @WhiteTiger-IT said in First installation, but PC no longer connects:

          On the PC of pfSense I installed Xubuntu indicating to take the whole disk.
          Then I installed pfSense again, always taking the whole disk.

          I guess it's possible to make the pfSense device a dual boot device.
          The manual doesn't speak a word about it. I didn't even know people did such a thing.
          Ones it own it's has it's own file system. pfSense doesn't look in other file system for it's settings, it isn't even aware that they exist.
          As long as it boot, it should be fine.

          @WhiteTiger-IT said in First installation, but PC no longer connects:

          Obviously with the static IP the values IP, Mask, DNS and Gateway are correct

          Great.
          Understand that I had to ask.
          Most people that install pfSense understand what an Ip is.
          But masks (networks) , gateway etc : they are less known.
          Like the famous : I set up my pfSense LAN to /32 (was /24) and now DHCP doesn't work ....

          No "help me" PM's please. Use the forum, the community will thank you.
          Edit : and where are the logs ??

          1 Reply Last reply Reply Quote 0
          • W
            WhiteTiger-IT @Gertjan
            last edited by

            @Gertjan
            It happened again!
            I have made a new installation.

            From my browser I connected and arrived at the login page.
            I did not enter and I turned off my PC; then, from the console of pfSense, I selected 6) Halt System.

            Return to the office.
            I turn on pfSense and once it is started, I turn on my PC, try the connection again and it gives me an error.
            From the moment of installation to now I have only turned off pfSense with the Halt System command.

            This is the photo taken on the pfSense PC after the installation.
            After installation there is an error message.
            Alt-Install
            This is the photo taken on the pfSense PC now
            pfSense-Now
            This is the photo taken on the switch with only the two cables involved.
            Switch
            And this is the snapshoot of the IPv4 configurations of my PC.
            alt text

            1 Reply Last reply Reply Quote 0
            • GertjanG
              Gertjan
              last edited by Gertjan

              During boot, look at boot console screen.
              At the end - you'll see the menu.

              Use option 8 and command

              ifconfig

              compare mac addresses with interface / driver names = pfSense interfaces.
              be sure they are not mixed up.

              If your LAN became WAN , then all explains.

              edit : when you set up a static IP on your PC, do not omit the Gateway - neither the DNS. You have to fill them in.
              "192.168.1.1" for both. These 2 are not really optional.

              No "help me" PM's please. Use the forum, the community will thank you.
              Edit : and where are the logs ??

              W 1 Reply Last reply Reply Quote 0
              • V
                valentinius
                last edited by

                seccion reply lists seem to be useful for me, i dont remember where i saw them

                1 Reply Last reply Reply Quote 0
                • W
                  WhiteTiger-IT @Gertjan
                  last edited by WhiteTiger-IT

                  @Gertjan said in First installation, but PC no longer connects:

                  During boot, look at boot console screen.
                  At the end - you'll see the menu.

                  Use option 8 and command

                  ifconfig

                  compare mac addresses with interface / driver names = pfSense interfaces.
                  be sure they are not mixed up.

                  If your LAN became WAN , then all explains.

                  edit : when you set up a static IP on your PC, do not omit the Gateway - neither the DNS. You have to fill them in.
                  "192.168.1.1" for both. These 2 are not really optional.

                  Sorry, but are you telling me that during boot pfSense swaps the WAN with the LAN?
                  If true it is crazy!
                  At this point pfSense becomes totally useless because it is unmanageable.
                  Since there are thousands of them installed, I would like to understand why this only happens to mine.

                  Finally, I know that I have to put gateways and DNS on my PC, but if I want to surf with Wi-Fi I can't put them because there is already the gateway to this.

                  === Update ===
                  From Xubuntu I deleted the partition on the disk and then I made a new fresh installation of pfSense.
                  Now I have arrived again at the login page and this time turning off and on I can still get to the login page.
                  I try again to do the configuration and we will see if it still works tomorrow morning.
                  Otherwise I don't know what to think anymore, except to blame the green goblins

                  For the moment, thank you

                  1 Reply Last reply Reply Quote 1
                  • W
                    WhiteTiger-IT
                    last edited by WhiteTiger-IT

                    It is simply ridiculous!
                    It was not possible that last evening it worked and this morning it no longer works!

                    Whatever the change that bothered it.
                    It cannot work at the time of the save and not work the next day.

                    And then what bothers?
                    I haven't even created a rule. I haven't even changed the interface configuration. Not even the name OPT1.
                    I changed the Dashboard, activated PowerSaving, created two users

                    GertjanG 1 Reply Last reply Reply Quote 1
                    • GertjanG
                      Gertjan @WhiteTiger-IT
                      last edited by

                      This :

                      @WhiteTiger-IT said in First installation, but PC no longer connects:

                      last evening it worked and this morning it no longer works!

                      is close-to-none error description.

                      Something in the logs at the moment of change ?
                      Did it reboot ?
                      Did you check the interfaces ?

                      @WhiteTiger-IT said in First installation, but PC no longer connects:

                      created two users

                      It's a firewall. Two users ? You need two admins ?

                      No "help me" PM's please. Use the forum, the community will thank you.
                      Edit : and where are the logs ??

                      W 1 Reply Last reply Reply Quote 0
                      • W
                        WhiteTiger-IT @Gertjan
                        last edited by WhiteTiger-IT

                        Everything closed at 12:45. At 16:00 I turn on and once again nothing works.
                        It was configured with DHCP and instead I am forced to put the Static IP on the PC, but even so it is not reachable.
                        There is no ping between PC and pfSense, nor between pfSense and PC.

                        If I don't log in, where can I find the logs?

                        @Gertjan said in First installation, but PC no longer connects:

                        is close-to-none error description.

                        So what?

                        Did you check the interfaces ?

                        The interfaces are correctly assigned to their respective MAC addresses, there has been no swap.
                        If they are working obviously I don't know.
                        The leds on the cards and on the switch work.

                        It's a firewall. Two users ? You need two admins ?

                        There are three users, two admin. I'm only using user "admin", but if I don't even get to the login page it's useless to talk about it.

                        GertjanG 1 Reply Last reply Reply Quote 0
                        • GertjanG
                          Gertjan @WhiteTiger-IT
                          last edited by

                          @WhiteTiger-IT said in First installation, but PC no longer connects:

                          So what?

                          I'm trying to understand what can happen.
                          I can shut my pfSense, and start it right away, or hours /days later, and it will humm on as before.
                          You probably believe me that this happens with many others (although, most of do not shut the system down often).

                          So what so special about your settings and/or device, knowing that the code base is the same.

                          @WhiteTiger-IT said in First installation, but PC no longer connects:

                          If I don't log in

                          God mode always works ☺ The console access : the most important access because it's dedicated to those times when things go down hill.

                          I'm curious to see - from the console - a boot when all goes well, and one when the system goes 'freeze'.

                          No "help me" PM's please. Use the forum, the community will thank you.
                          Edit : and where are the logs ??

                          W 1 Reply Last reply Reply Quote 0
                          • W
                            WhiteTiger-IT
                            last edited by

                            These are the steps during and after installation.
                            I don't find anything particular or wrong with what I have done.

                            PfSense installation

                            • Installation from USB stick
                            • Interface assignment
                              (remove the cable from the boards, choose Auto and insert the corresponding cable)
                            • Assign addresses
                            • Yes for reverting to WebConfigurator
                            • DHCP for LAN and OPT1
                            • Continue from browser (admin / pfsense)
                            • Complete the Wizard
                            • Check for updates
                            • In System / General Setup:
                              ** change the columns of the Dashboard to 3
                              ** Top Navigation on "Fixed"
                            • First configuration of the Dashboard

                            Done Backup -1-Post Installation

                            Advanced configuration

                            • In System / Advanced / Admin Access / WebConfigurator
                              ** Select HTTPS
                              ** WebConfigurator / TCP port = 1020
                              ** DO NOT enable WebGUI redirect (I tried also with enabled)
                              ** Enable Browser tab text
                              ** Enable Secure Shell on port 222
                            • In System / Advanced / Networking
                              ** Disable IPV6
                            • In System / Advanced / Miscellaneous
                              ** Power Savings Activate Enable PowerD
                              ** Cryptographic & Thermal Hardware / Thermal Sensors = Intel CPU
                              ** NO! Hardware Settings / Hard disk standby time = 12 (I tried with this settings)

                            Done Backup -2-Advanced-Config

                            User Management

                            • In System / User Manager
                              ** Creation of SysManager group / Users "admin" with fewer rights
                              ** Privilege assignment
                              *** User - Notices: View
                              *** WebCfg - Crash reporter
                              *** WebCfg - Diagnostics
                              *** WebCfg - Status
                            • User creation and association to groups
                              ** Enable Custom Settings and specify:
                              *** Top Navigatuon on "Fixed"
                              *** 3 columns in Dashnboard
                              *** Browser tab text = "Display page name first in browser tab"

                            Done Backup -3-UserManagement

                            1 Reply Last reply Reply Quote 0
                            • W
                              WhiteTiger-IT @Gertjan
                              last edited by

                              @Gertjan
                              Thank you for your interest and help.
                              I am aware that the problem is here, with my pfSense.

                              I don't understand what you mean by "close-to-none".
                              If you tell me where I find the log from the console, I'll go and see it

                              GertjanG 1 Reply Last reply Reply Quote 0
                              • GertjanG
                                Gertjan @WhiteTiger-IT
                                last edited by Gertjan

                                @WhiteTiger-IT said in First installation, but PC no longer connects:

                                "close-to-none"

                                "we" as a forum audience like to "see" things.

                                Like :

                                Console or SSH access : I's using SSH because all is fine now :

                                Using username "admin".

                                Authenticating with public key "rsa-key-20190201"
Passphrase for key "rsa-key-20190201":
pfSense - Netgate Device ID: 195fccaad82dc1d68d5f

*** Welcome to pfSense 2.4.5-RELEASE-p1 (amd64) on pfsense ***

 WAN (wan)       -> em3        -> v4/DHCP4: 192.168.10.2/24
 LAN (lan)       -> em1        -> v4: 192.168.1.1/24
                                  v6: 2001:470:1e13:5d0:2::1/64
 PORTAL (opt1)   -> fxp0       -> v4: 192.168.2.1/24
 HENETV6 (opt2)  -> gif0       -> v6: 2001:470:1e12:5d0::2/128
 EXPRESS (opt3)  -> ovpnc2     ->
 OPENVPN (opt4)  -> ovpns1     -> v4: 192.168.3.1/24
                                  v6: 2001:470:bce0:3::1/64

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 8

[2.4.5-RELEASE][admin@pfsense.brit-hotel-fumel.net]/root: dmesg
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun  2 17:53:37 EDT 2020
    root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf43  Family=0xf  Model=0x4  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2005266432 (1912 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <DELL   DM051  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 hardware threads
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1596034060 Hz quality 1000
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
000.000022 [4213] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff812d9960, 0) error 19
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL DM051  > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xecd8-0xecdf mem 0xeff00000-0xeff7ffff,0xd0000000-0xdfffffff,0xefec0000-0xefefffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xeff80000-0xefffffff at device 2.1 on pci0
hdac0: <Intel 82801G HDA Controller> mem 0xefebc000-0xefebffff irq 16 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xd8c0-0xd8ff mem 0xef980000-0xef99ffff,0xefa00000-0xefa3ffff irq 18 at device 2.0 on pci2
em0: Ethernet address: 6c:b3:11:50:c6:c6
em0: netmap queues/slots: TX 1/256, RX 1/256
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xdc00-0xdc3f mem 0xef9a0000-0xef9bffff,0xefa40000-0xefa7ffff irq 19 at device 2.1 on pci2
em1: Ethernet address: 6c:b3:11:50:c6:c7
em1: netmap queues/slots: TX 1/256, RX 1/256
em2: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xdc40-0xdc7f mem 0xef9c0000-0xef9dffff,0xefa80000-0xefabffff irq 19 at device 3.0 on pci2
em2: Ethernet address: 00:1b:21:32:da:42
em2: netmap queues/slots: TX 1/256, RX 1/256
em3: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xdc80-0xdcbf mem 0xef9e0000-0xef9fffff,0xefac0000-0xefafffff irq 16 at device 3.1 on pci2
em3: Ethernet address: 00:1b:21:32:da:43
em3: netmap queues/slots: TX 1/256, RX 1/256
fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0xdcc0-0xdcff mem 0xef97f000-0xef97ffff irq 20 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:12:3f:b3:58:75
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff,0xcc800-0xce7ff,0xce800-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102d0000102d
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102d0000102d
device_attach: est1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <Sigmatel STAC9221 HDA CODEC> at cad 0 on hdac0
hdaa0: <Sigmatel STAC9221 Audio Function Group> at nid 1 on hdacc0
pcm0: <Sigmatel STAC9221 (Rear Analog 5.1 Speaker)> at nid 13,15,12 on hdaa0
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ata0: timeout waiting for read DRQ
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata0:0:1:0): Retrying command
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub0: 8 ports with 8 removable, self powered
ugen2.2: <American Power Conversion Back-UPS RS 550G FW857.L4 .I USB FWL4> at usbus2
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: Command timeout
(aprobe0:ata0:0:1:0): Error 5, Retries exhausted
ada0 at ata2 bus 0 scbus1 target 1 lun 0
ada0: <WDC WD3200AAKS-00G3A0 40.00A40> ATA8-ACS SATA 2.x device
cd0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: Serial Number WD-WMAUC0015474
ada0: 300.000MB/s transferscd0:  (SATA 2.x, UDMA5, PIO 8192bytes<PHILIPS DVD+-RW DVD8701 5D24> Removable CD-ROM SCSI device
cd0: Serial Number MY0M9753701595AD01HQ
cd0: 33.300MB/s transfers)
ada0: 305245MB (625142448 512 byte sectors)
 (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ufsid/54ca20c41b3d50b0 [rw]...
random: unblocking device.
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf43  Family=0xf  Model=0x4  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  TSC: P-state invariant
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102d0000102d
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102d0000102d
device_attach: est1 attach returned 6
lo0: link state changed to UP
em3: link state changed to UP
fxp0: link state changed to DOWN
gif0: link state changed to UP
tun1: changing name to 'ovpns1'
ovpns1: link state changed to UP
pflog0: promiscuous mode enabled
gif0: link state changed to DOWN
gif0: link state changed to UP
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
fxp0: link state changed to UP
em1: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
IPFW: starting up interface tracker
em3: link state changed to DOWN
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
em3: link state changed to UP
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
gif0: link state changed to DOWN
arpresolve: can't allocate llinfo for 192.168.10.1 on em3
gif0: link state changed to DOWN
gif0: link state changed to UP
gif0: link state changed to DOWN
gif0: link state changed to UP
gif0: link state changed to DOWN
gif0: link state changed to UP
ovpns1: link state changed to DOWN
ovpns1: link state changed to UP
arp: 192.168.2.132 moved from f8:a2:d6:4b:dc:bd to fa:a2:c5:4b:64:44 on fxp0

                                The logs shows the hardware inventory of the kernel.
                                Could be interessting, because

                                ** Power Savings Activate Enable PowerD

                                and if the MB doesn't support that FreeBSD approach of implementing PowerD, anything can happen (just an example).

                                What about rebooting when you reached the "Backup -1-Post " : if it comes back fine, you know you can proceed oen step ...

                                No "help me" PM's please. Use the forum, the community will thank you.
                                Edit : and where are the logs ??

                                W 2 Replies Last reply Reply Quote 0
                                • W
                                  WhiteTiger-IT @Gertjan
                                  last edited by

                                  @Gertjan
                                  I can't even connect to SSH, which I'm sure I have enabled.
                                  I also thought it might be PowerSaving.
                                  The Motherboard expects this and the CPU is a Celeron. So this shouldn't be the problem.
                                  However I install pfSense again and don't enable the option. I had already "discarded" the standby of the disc.
                                  Considering that little is used, I would not mind that they would consume less, if everything does not stop.
                                  Now I reset pfSense another time

                                  1 Reply Last reply Reply Quote 0
                                  • W
                                    WhiteTiger-IT @Gertjan
                                    last edited by

                                    @Gertjan
                                    Is it normal that after installation I cannot surf the Internet from the LAN?
                                    I have to use a second PC connection on a Hotspot of my Smartphone to be able to surf the Internet and access the documentation.

                                    GertjanG 1 Reply Last reply Reply Quote 0
                                    • GertjanG
                                      Gertjan @WhiteTiger-IT
                                      last edited by Gertjan

                                      @WhiteTiger-IT said in First installation, but PC no longer connects:

                                      Is it normal that after installation I cannot surf the Internet from the LAN?

                                      If the LAN NIC is ok, your PC NIC is ok, the cable is ok - and at least one of the NIC's support MDX (rather standard these days, before you needed a hub/switch/or cross over cable), then all you need is a cable and your connected.

                                      Do understand that I use just one line for something that needs to meets hundreds of conditions to work.

                                      Your PC will use it's default DHCP client to obtain an IP (and mask and gateway and DNS) from the DHCP server on pfSense - this is something every router on earth does, pfSense does the same thing.
                                      This can be sen in the DHCP server log right away.
                                      On your PC, a Windows thing ? Enter

                                      ipconfig /all

                                      and you see the other side.

                                      edit : just by any chance : when you set up the DHCP pool on LAN, it's bigger as "1" - something like 192.168.1.10 to 192.168.1.100 and the LAN's mask is /24, not /32 (yep, this happens).

                                      No "help me" PM's please. Use the forum, the community will thank you.
                                      Edit : and where are the logs ??

                                      W 1 Reply Last reply Reply Quote 0
                                      • W
                                        WhiteTiger-IT @Gertjan
                                        last edited by

                                        @Gertjan said in First installation, but PC no longer connects:
                                        The cable is OK, the switch is a good HP and it's OK.
                                        On the other hand, the problem occurs after switching off and on.
                                        pfSense refuses the connection.
                                        Now I do a new installation of Win10Pro.
                                        Mine is a clean PC with only very few applications installed: Dropbox, OpenVPN, VMWare Workstation, Evernote.
                                        I do a new installation since on the net we talk about the problems with the latest Win Updates, but I'm sure that's not the problem.
                                        Now I'm going by attempts.

                                        GertjanG 1 Reply Last reply Reply Quote 0
                                        • GertjanG
                                          Gertjan @WhiteTiger-IT
                                          last edited by Gertjan

                                          @WhiteTiger-IT said in First installation, but PC no longer connects:

                                          problems with the latest Win Updates

                                          2004 ?
                                          Runs fine on several machines here.

                                          @WhiteTiger-IT said in First installation, but PC no longer connects:

                                          VMWare Workstation

                                          This one can do 'things' with the NIC of your PC .... Never sued it myself, although I have a VM using Windows Pro Hyper-V running pfSense just fine @home.

                                          edit : side note : I wouldn't call a today fresh Windows machine a "clean" thing.
                                          Bought two news PC's from dell this morning, equipped with Win10Pro and probably lose my temper (again) when I see that Candy & family popping up in my phase. These two PC's will get probably de-bloated first.

                                          No "help me" PM's please. Use the forum, the community will thank you.
                                          Edit : and where are the logs ??

                                          W 1 Reply Last reply Reply Quote 0
                                          • W
                                            WhiteTiger-IT @Gertjan
                                            last edited by

                                            @Gertjan
                                            New installation from scratch of pfSense.
                                            New installation from scratch of Win10 Pro.
                                            No configuration neither in pfSense, nor in Win 10; not even an update.
                                            A failed connection error returns from Edge http://192.168.1.1 and https://192.168.1.1.
                                            I also tried with Xubuntu 20.04 Live. Always mistake.

                                            With the PC clean and from a Live there are no more potential conflicts with other particular programs or configurations.
                                            On the other hand, this PC has always connected to IPFire, OpnSense, Proxmox, VMWare ESXi, Debian & Ubuntu Server.
                                            I have never had connection problems, both when SSH was needed and when I had to use a web panel.

                                            Tomorrow I change the firewall PC, but I don't understand why since it never gave problems.

                                            Then I give up because I don't know what to do anymore.

                                            P.S .: I don't think it's some game that MS downloads in the Start Menu to create problems since I haven't even opened it.

                                            GertjanG 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.