Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Hardware options to run pfSense

    Scheduled Pinned Locked Moved Hardware
    17 Posts 6 Posters 1.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Raffi_R
      Raffi_ @stephenw10
      last edited by

      @stephenw10 said in Hardware options to run pfSense:

      I would have had the Dell down as consuming significantly more than the Atom based Supermicro.

      A C2750 will be more than sufficient there. You won't need 16GB of RAM in it. You could probably do all of that with 2GB, 4GB to be safe.

      Steve

      Agree with this. The supermiro sounds like the least power hungry out of all options. I would go with that. All of them will be more than enough for all the requirements mentioned. To give you an idea, I'm running pfblockerNG, suricata, OpenVPN, and a few other packages on an overkill 8th gen i3, 8GB of ram and a single 120GB SSD. The CPU is always sitting close to 1-2% and ram is only ~40%. All of this is overkill for the small office even during heavy VPN use.

      1 Reply Last reply Reply Quote 0
      • provelsP
        provels @stephenw10
        last edited by

        @stephenw10
        Not to worry, as it's a cold backup. If you want to compile 2.4.5_p1 on x86 for me, I'll happily upgrade. And if that blows, I still have my Nokia ip530 on 1.2.3 on a gmirror raid... In any case it would only need to be online long enough to DL an ISO if needed.

        Peder

        MAIN - pfSense+ 24.11-RELEASE - Adlink MXE-5401, i7, 16 GB RAM, 64 GB SSD. 500 GB HDD for SyslogNG
        BACKUP - pfSense+ 23.01-RELEASE - Hyper-V Virtual Machine, Gen 1, 2 v-CPUs, 3 GB RAM, 8GB VHDX (Dynamic)

        stephenw10S 1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator @provels
          last edited by

          @provels said in Hardware options to run pfSense:

          I still have my Nokia ip530 on 1.2.3 on a gmirror raid...

          Ha. ๐Ÿ˜

          provelsP 1 Reply Last reply Reply Quote 0
          • C
            cphillips
            last edited by

            Thanks all, I am going to run the C2750 and see how that goes.

            This is the board I have - https://www.supermicro.com/products/motherboard/atom/x10/a1sai-2750f.cfm

            Do we know if the onboard NIC's are ok to run pfSense or should I be looking at installing an Intel card?

            DaddyGoD 1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              C2K CPUs are a SoC with 4x igb NICs built in. You should be fine there.

              Steve

              1 Reply Last reply Reply Quote 0
              • DaddyGoD
                DaddyGo @cphillips
                last edited by

                @cphillips

                Just for the sake of completeness...
                It's a matter of taste, the Atom series

                https://www.servethehome.com/intel-atom-c2000-series-bug-quiet/
                https://www.servethehome.com/intel-atom-c2000-avr54-bug-strikes-sth/

                and etc.

                Cats bury it so they can't see it!
                (You know what I mean if you have a cat)

                1 Reply Last reply Reply Quote 1
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by stephenw10

                  It does depend on the age of that board though.

                  1 Reply Last reply Reply Quote 0
                  • C
                    cphillips
                    last edited by

                    It's not new, a few years old but I am willing to use it. I actually have two of them so can have a cold spare ready to go.

                    1 Reply Last reply Reply Quote 0
                    • provelsP
                      provels @stephenw10
                      last edited by

                      @stephenw10
                      HA you say! :) I think it was $15,000 our price ($17,000 MSRP). Probably the most expensive home installed pfSense box ever!
                      And they just gave it to me... :)

                      Memories...

                      Peder

                      MAIN - pfSense+ 24.11-RELEASE - Adlink MXE-5401, i7, 16 GB RAM, 64 GB SSD. 500 GB HDD for SyslogNG
                      BACKUP - pfSense+ 23.01-RELEASE - Hyper-V Virtual Machine, Gen 1, 2 v-CPUs, 3 GB RAM, 8GB VHDX (Dynamic)

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Ha nice. ๐Ÿ‘

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.