Different Network Structure
-
network this way
But how should I do it? -
Both interfaces on the same subnet. Say 172.20.1.0/30
Routed package on pfsense.
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30031
Then you allow networks from the other side to reach via firewall rules.
You will probably have to allow the pfsense traffic on the Fortinet side as well.
-
Have you set up the interfaces that you show connected in your picture above?
-
I fail ignorant :(
-
First set up your spare interfaces like this and connect them together.
-
Add the "Routed" package.
-
Set up the "Routed" package on the pfsense router and choose the interface that connects to the other Fortinet Router. Pick a password that both sides will share.
-
@chpalmer said in Different Network Structure:
Use this document to help you with the Fortinet router and setting up RIP on it.
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30031
-
-
If you don't have spare interfaces.. this could be done via a VPN from one WAN to the other WAN..
-
Will it work if we connect two devices with port and write route ?
-
@ahmetakkaya said in Different Network Structure:
Will it work if we connect two devices with port and write route ?
Yes. The routed package writes the route for you. But it can be all done manually..
