Not getting properthroughput on gigabit devices. 200mbps when it should be at least 600mbps

Berzerk

@johnpoz Alberta. School Board ant no piggy bank. They offered devices, but not free. Cheapest were still $300CAD.

stephenw10

Check the PCI bus. Maybe it has something else on there doing something funky? pciconf -lv

The FreeBSD drivers for other things of that age are probably....sub optimal!

Disable anything you can in the BIOS etc.

What does your /var/log/dmesg.boot look like? Errors in there?

johnpoz

That sucks.. But even here in chicago they were giving away devices.. Pretty sure CPS gave away like 100k devices, with priority going to lower income families..

edit: They want them back after this is all over though.

Berzerk

@johnpoz And people say Canada has more free stuff.

johnpoz

I am curious where that budget came from ;) You would hope that the makers would step up and donate, or atleast offer them at fraction of cost, etc.

But a new pi would be a great little device for sure - at very low cost.. problem would be is I don't think they make enough of them for the situation we are in.

Berzerk

@stephenw10 Ya, there are a few things going on, on the bus.

hostb0@pci0:0:0:0:	class=0x060000 card=0x30c5103c chip=0x2a008086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Memory Controller Hub'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:	class=0x060400 card=0x30c5103c chip=0x2a018086 rev=0x0c hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
none0@pci0:0:3:0:	class=0x078000 card=0x30c5103c chip=0x2a048086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965 MEI Controller'
    class      = simple comms
atapci0@pci0:0:3:2:	class=0x010185 card=0x30c5103c chip=0x2a068086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965 PT IDER Controller'
    class      = mass storage
    subclass   = ATA
uart2@pci0:0:3:3:	class=0x070002 card=0x30c5103c chip=0x2a078086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965 KT Controller'
    class      = simple comms
    subclass   = UART
em0@pci0:0:25:0:	class=0x020000 card=0x30c5103c chip=0x10498086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82566MM Gigabit Network Connection'
    class      = network
    subclass   = ethernet
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x30c5103c chip=0x28348086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x30c5103c chip=0x28358086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x30c5103c chip=0x283a8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
hdac1@pci0:0:27:0:	class=0x040300 card=0x30c5103c chip=0x284b8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) HD Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib2@pci0:0:28:0:	class=0x060400 card=0x30c5103c chip=0x283f8086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:4:	class=0x060400 card=0x30c5103c chip=0x28478086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCI Express Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci2@pci0:0:29:0:	class=0x0c0300 card=0x30c5103c chip=0x28308086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:1:	class=0x0c0300 card=0x30c5103c chip=0x28318086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:2:	class=0x0c0300 card=0x30c5103c chip=0x28328086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x30c5103c chip=0x28368086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
pcib4@pci0:0:30:0:	class=0x060401 card=0x30c5103c chip=0x24488086 rev=0xf3 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Mobile PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x30c5103c chip=0x28118086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HEM (ICH8M-E) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
ahci0@pci0:0:31:2:	class=0x010601 card=0x30c5103c chip=0x28298086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]'
    class      = mass storage
    subclass   = SATA
vgapci0@pci0:1:0:0:	class=0x030000 card=0x30c5103c chip=0x95811002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices, Inc. [AMD/ATI]'
    device     = 'RV630/M76 [Mobility Radeon HD 2600]'
    class      = display
    subclass   = VGA
hdac0@pci0:1:0:1:	class=0x040300 card=0x30c5103c chip=0xaa081002 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices, Inc. [AMD/ATI]'
    device     = 'RV630 HDMI Audio [Radeon HD 2600 PRO/XT / HD 3610]'
    class      = multimedia
    subclass   = HDA
cbb0@pci0:2:6:0:	class=0x060700 card=0x30c5103c chip=0x04761180 rev=0xb9 hdr=0x02
    vendor     = 'Ricoh Co Ltd'
    device     = 'RL5c476 II'
    class      = bridge
    subclass   = PCI-CardBus
cbb1@pci0:2:6:1:	class=0x060700 card=0x30c5103c chip=0x04761180 rev=0xb9 hdr=0x02
    vendor     = 'Ricoh Co Ltd'
    device     = 'RL5c476 II'
    class      = bridge
    subclass   = PCI-CardBus
re0@pci0:3:0:0:	class=0x020000 card=0x52001385 chip=0x816910ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8169 PCI Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet

JKnott

@akuma1x said in Not getting properthroughput on gigabit devices. 200mbps when it should be at least 600mbps:

Dude, time to throw stuff away! It's nostalgic and all, but old tech is rarely useful.

Well, if we're talking antiques...

Morse sounder

Several years ago, I salvaged this from a telecommunications office in Geraldton, Ont., which was going to be demolished. It would be from around 1935. 1 Gb is a bit of a stretch for it.

JKnott

Here's another one:

Core memory

Derelict

@johnpoz said in Not getting properthroughput on gigabit devices. 200mbps when it should be at least 600mbps:

@Derelict So you drove/shipped that all the way to TN, just to throw it away - hehehhe

You have no idea. Well, maybe you do.

stephenw10

Anything further from:
pciconf -lcvV re0
or
cat /var/log/dmesg.boot | grep re0

Steve

Berzerk

@stephenw10

pciconf -lcvV re0
re0@pci0:3:0:0:	class=0x020000 card=0x52001385 chip=0x816910ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8169 PCI Gigabit Ethernet Controller'
    class      = network
    subclass   = ethernet
    cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0

cat /var/log/dmesg.boot | grep re0
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0x1400-0x14ff irq 16 at device 0.0 on cardbus0
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:0f:b5:4d:5b:90
re0: netmap queues/slots: TX 1/256, RX 1/256

stephenw10

Any further details of cardbus0? cat /var/log/dmesg.boot | grep cardbus0

Berzerk

@stephenw10 said in Not getting properthroughput on gigabit devices. 200mbps when it should be at least 600mbps:

cat /var/log/dmesg.boot | grep cardbus0

cat /var/log/dmesg.boot | grep cardbus0
cardbus0: <CardBus bus> on cbb0
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0x1400-0x14ff irq 16 at device 0.0 on cardbus0

Berzerk

@JKnott Oh wow. And I thought my MFM HD with a carrying handle was neat.

stephenw10

Could try booting verbose mode:
Add boot_verbose="YES" to /boot/loader.conf.local. Create that file if you don't have one.

Be good to see it report the bus width and speed at some point.

But to be honest even I would probably just move onto something less problematic. Unless it's just a challenge at this point.

Steve

Berzerk

@stephenw10 Well like I said, I've got a core 2 quad I can use, and I'll order a Intel PRO/1000 dual port server adapter for it. Then I'll have a third port for testing seperate network if I want.

But it is a challenge. I'll add that to boot, and get back to you.

johnpoz

Its a challenge to start a fire with rubbing 2 sticks together, when you could just use the lighter in your pocket.

I get it if your plane crashed in the mountains, and you need to get the fire going to cook the guy next to you that didn't make it..

Or hey your doing a good thing by getting this old pos laptop working for the poor kids. But for my internet router.. And your 600mbps connection - which I take it isn't freaking free.. Why dick around - just buy something current that you know is going to work and be problem free.

Sure if its your hobby to get old shit working doing shit it was never meant to do.. Then have at it.. But sure wouldn't use it for "my" actual internet connection.. Just Saying..

You hobble together some shit parts from yesteryear, and every time you don't get the speed you think you should be getting that your paying for.. Is it the isp, is it something else - is it my pos 15 year old hardware that my new toaster oven has a faster cpu than ;)

Berzerk

@stephenw10 @johnpoz @Derelict @JKnott

Well, last night I switched to a Dell Core 2 quad with 6gb RAM.
Same Ethernet. 1 Intel/Pro1000 and 1 Realtek8169 (Dlink PCI)

Hooked it up, imported the settings, and I'm getting 600mbps easy now. So it looks like it was the CPU as the main roadblock.

Thanks for all you guy's help.

It was fun.

akuma1x

@Berzerk That looks better!

Ok, one question remains... what interface is that Realtek NIC running - WAN or LAN? I thought you were going to try to get away from that stuff...

Jeff

Berzerk

@akuma1x It is running on the lan side. I'm going to be putting a Dual port Intel/Pro1000 in its place, but It has not arrived yet.

I mean, I only ordered it yesterday, and I wasn't going to pay for overnight shipping. :) Being as how cheap I am.