Cant reach my imap server
-
@MOdesty said in Cant reach my imap server:
and provider asks me to use port 587 for outgoing and 143 for incoming.
Are you connecting to the IMAP unencrypted?
-
@viragomann said in Cant reach my imap server:
Are you connecting to the IMAP unencrypted?
That is scary. @MOdesty I would look for another provider if that is the case.
-
thanks @Raffi_ and @viragomann
Well, I have had trouble connecting so its unencrypted. This is a mail account I don't use much...
I call them and ask how to enable encryption.I disabled Snort, but still cant connect whit 'telnet mail.mydomain.com 587' and 'mail.mydomain.com 144'
I know its not much info Isupply, but I'm not a FW expert...
Can I make some logging to show you guys?
Everything can be rebuilt!
-
@viragomann said in Cant reach my imap server:
Are you connecting to the IMAP unencrypted?
587 you just leave it, as it can be STARTTLS
but the 143 naked as the head of a bald man993 and 465 well they prefer
Cats bury it so they can't see it!
(You know what I mean if you have a cat) -
@MOdesty said in Cant reach my imap server:
I disabled Snort, but still cant connect whit 'telnet mail.mydomain.com 587' and 'mail.mydomain.com 144'
I asked you to try going to the block list and removing the entries for a reason. Disabling Snort, does not do the same thing. If you have entries being blocked by snort, disabling snort does not allow traffic to those entries, they are still blocked. You MUST go to Snort and clear the block list to restore that traffic.
-
-
@Raffi_ said in Cant reach my imap server:
You MUST go to Snort
when I first saw the post immediately jumped into Snort issue and if IMAP / SMTP related rules are installed without reason this will be the possible case,....hmmm
-
@MOdesty if you are not familiar with how Snort works, I would highly recommend running it as an IDS (intrusion detection mode) initially. My suggestions above are assuming you're running it as an IPS (intrusion prevention mode) which would block on alerts.
-
@MOdesty said in Cant reach my imap server:
I call them and ask how to enable encryption.
it is usually enough to change the ports + Auth., as every serious mail provider uses more than one ports ...
it is also true that, the serious email service providers....
unencrypted ports have already been closedlike here:
or here:
-
Hi
i hope i can get some more help...I have changed to imap 993/ssl + 465/ssl, it works when on shared 4g WLAN, NOT on pfSense
I have disabled all pfSense pakages, did not work
I have restored pfSense backup from desember 2019 (at that time all was working)
My imap mail service provider states that certificate is not for me alone, but for all their mail customers, it is a letsEncrypt, seems to work because it works on my phone + on my computer when on other wlan that my pfSense box.
Another odd thing, my Samsung phone with samsung mail works as my computer (works not) when phone and PC usese wlan from my pfSense.
On my phone i installed outlook and that client manage to receive mail when on same lan as PC, pfSense box., why?Any ideas to search for solutions?
-
@MOdesty said in Cant reach my imap server:
Another odd thing, my Samsung phone with samsung mail works as my computer (works not) when phone and PC usese wlan from my pfSense.
On my phone i installed outlook and that client manage to receive mail when on same lan as PC, pfSense box., why?Your saying : your Phone, using the local WLAN or Wifi, so behind pfSense on a LAN, can access the mail, but the PC on the same LAN, can not ?
This excludes pfSense as an issue.Suddenly, you mention the word 'certificate' here.
@MOdesty said in Cant reach my imap server:
My imap mail service provider states that certificate is not for me alone
Why are you thinking the (a ?) certificate is just made for you ?
Why ? What error ?
Are you able to makes screen captures of the issues ? And Ctrl-C Ctrl-V them here in the forum ?
@MOdesty said in Cant reach my imap server:
Any ideas to search for solutions?
Yeah. You already said it yourself :
Everything can be rebuilt!
Squid, squidGuard, Snort, iPerf, clamd (and c-icap) are packages that go well beyond 'classic' router/firewall setup **
Better yet : for http, https, pop,pops, imaps,ssh, ntp, etc, actuallu, any port between 1 and 65535, to any addresses situated at the Internet, for TCP, UDP you do not need to add, remove or change something.
Set up pfSense by making WAN work, and you'll be good.Mail access is something that should be done in the device(s), where your mail clients are. Nothing has to be done on pfSense.
** It's said that some video documentation on the Internet shows the usage of some packages, giving the impression that you can intercept traffic that flows through the router. You can't. As the KGB, Mossad, CIA, NSA can't neither.
For valid video sources : see the Netgate => Youtube videos (only). -
Hi
Well, it can be rebuilt, and a backup from 2019 is that, did unfortunate not help this time.
this is the only error I manage to find:
the big question is why my computer reach mail server when on OFFICE LAN and not on HOME LAN? Same internet provider (get.no) and same mail provider. Only difference is router config:
HOME pfSense + bridged get.no router
WORK only get.no router.Reason I mention SSL certificate is that it is information you forum useres may understand and connect to my mail issue. Mail provider write on his home page:
"Use of encryption (SSL)
If you wish, you can use encrypted connection to the mail server. Note, however, that your e-mail server does not have its own so-called SSL certificate, but shares this with other customers. You will thus get a warning in your e-mail reader the first time you activate SSL which says that the certificate does not match your domain name. You must accept the certificate then presented before you can use SSL."
