Locked out with "browser needs to accept cookies"

Mosheb

Hi,
I installed the Pfsense and after all configuration I have changed the login to https (fromhttp).
At this point I was locked out, getting the message that the browser need to accept cookies.
Tried Chrome, Mozilla, IE - all configured to accept cookies, but dod nit succeed to log in.
Please help as the next solution is to start all over again which is time consuming!!!
Thanks

kiokoman

@Mosheb said in Locked out with "browser needs to accept cookies":

browser need to accept cookies

Jimp wrote: This appears to be a local problem with browser caching and is likely from HSTS or similar. You'll have to clear the cache and probably manually delete cookies if you change from HTTPS to HTTP. That's all up to your browser, though.

https://redmine.pfsense.org/issues/8235

use something like ccleaner

stephenw10

You can revert to http from the console if required without having to re-install.

You should be using https though. That's the default.

Steve

Mosheb

This post is deleted!

Mosheb

@stephenw10 You mean from the server itself? How?
I know there is a menue for configuring - how do I revert back to the http?

SteveITS

@Mosheb said in Locked out with "browser needs to accept cookies":

how do I revert back to the http

https://docs.netgate.com/pfsense/en/latest/troubleshooting/locked-out.html#http-vs-https-confusion

stephenw10

You can roll back the last config change using option 15.

You can reset the LAN IP (to the same thing) using option 2.

*** Welcome to pfSense 2.5.0-DEVELOPMENT (amd64) on 25dev ***

 WAN (wan)       -> vtnet0     -> v4/DHCP4: 172.21.16.167/24
 LAN (lan)       -> vtnet1     -> v4: 192.168.167.1/24
 VXLAN0 (opt1)   -> vxlan0     -> 
 VXLAN3 (opt2)   -> vxlan1     -> 
 VXLAN4 (opt3)   -> vxlan3     -> 

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 2

Available interfaces:

1 - WAN (vtnet0 - dhcp, dhcp6)
2 - LAN (vtnet1 - static)
3 - VXLAN0 (vxlan0)
4 - VXLAN3 (vxlan1)
5 - VXLAN4 (vxlan3)

Enter the number of the interface you wish to configure: 2

Enter the new LAN IPv4 address.  Press <ENTER> for none:
> 192.168.167.1 

Subnet masks are entered as bit counts (as in CIDR notation) in pfSense.
e.g. 255.255.255.0 = 24
     255.255.0.0   = 16
     255.0.0.0     = 8

Enter the new LAN IPv4 subnet bit count (1 to 31):
> 24

For a WAN, enter the new LAN IPv4 upstream gateway address.
For a LAN, press <ENTER> for none:
> 

Enter the new LAN IPv6 address.  Press <ENTER> for none:
> 

Do you want to enable the DHCP server on LAN? (y/n) y
Enter the start address of the IPv4 client address range: 192.168.167.10
Enter the end address of the IPv4 client address range: 192.168.167.100
Disabling IPv6 DHCPD...
Do you want to revert to HTTP as the webConfigurator protocol? (y/n) y

But you shouldn't do that because you should be using https.

Steve

ltocto

Hola lo que deben hacer es ir al menu por ssh o consola de la pc y reiniciar el web configuration que se encuentra en la opción 11 del menú

linuxmac

Restart webConfigurator, this will fix the error

jimmy765

This post is deleted!

kiokoman

@johnpoz
fee-faw-fum (I smell the blood of a SpammerMan)