Marvell 88E1512 No LED status
-
both 2.4.4 p3 and 2.4.5 were tried and no luck
-
What NIC is it attached to?
Many years ago we saw issues with the sk and msk driver not setting up the LED registers correctly. A hacked driver was the only solution at the time though.
Steve
-
Sir my laptop is using a Realtek PCIe Family. LED status on my laptop and so as with my gigabit switch are working.
Note that this issue was duplicated also in the manufacturer now.
-
But what NICs are in your pfSense device? Assuming you're not using your laptop for that.
Steve
-
Sir
from the specs it is 1 GbE PHY: Marvell 88E1512and theyre being detected as follows
ix2 00:18:7d:ff:48:ad (down) Intel(R) PRO/10GbE PCI-Express Network Driver,
ix3 00:18:7d:ff:48:ae (down) Intel(R) PRO/10GbE PCI-Express Network Driver,thanks
-
What us that appliance? Do the LEDs show correctly when running a different OS, something Linux based?
Steve
-
sir, some progress from manufacturer...LED can run now from freebsd only..but it seems with freebsd+pfsense still not yet
the device;
https://www.ieiworld.com/en/product/model.php?II=692 -
What change was required to get them working in FreeBSD?
-
i dont have that info yet but surely will update this forum once done
-
@ozlecz Is it done yet? Im curious
-
its working now sir...their tech team has done it.
-
So fixed with a firmware update from the manufacturer?
-
@stephenw10 yes sir
-
just a follow up on this.
what if theres a new pfsense update. Can i update mine from the GUI?
-
If the fix here was in firmware, a BIOS update, then it would not affect a pfSense version upgrade.
Steve
