Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    LACP not working

    Scheduled Pinned Locked Moved General pfSense Questions
    113 Posts 2 Posters 31.2k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      cyberbot
      last edited by

      @stephenw10 said in LACP not working:

      You have custom peer info values configured causing the mismatch?

      Thank you Steve
      what do you mean with You have custom peer info values configured causing the mismatch? on the pfbox or switch?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        On the switch, as shown in that doc.

        C 1 Reply Last reply Reply Quote 0
        • C
          cyberbot @stephenw10
          last edited by

          @stephenw10 said in LACP not working:

          On the switch, as shown in that doc.

          i always thought it on the switch, i dont understand about the mismatch value thing,
          but i need to do some research to see if i can fix it.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            It's possible to set the peer-info value in the switch and that will break the lag if it doesn't match what the peer is actually sending.
            Without any peer-info set it accepts the first info it sees as dynamic.

            Check the lag config on the switch.

            Steve

            C 1 Reply Last reply Reply Quote 0
            • C
              cyberbot @stephenw10
              last edited by

              @stephenw10 said in LACP not working:

              It's possible to set the peer-info value in the switch and that will break the lag if it doesn't match what the peer is actually sending.
              Without any peer-info set it accepts the first info it sees as dynamic.

              Check the lag config on the switch.

              Steve

              Thank you Steve,
              to be honest i am a Cisco guy so dont know how to do this peer-info.
              as i understand i have to run this command on the lag ?

              peer-info sys-mac 609c.609c.609c sys-pri 10 key 29999
              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Hmm, interesting. That doesn't match this:

                priority=4,id=e839.3511.faab,key=0

                Also unclear how the ports there appear to have a different priority set.

                What you are seeing appears to be the Brocade end MAC also.

                This is not something I've ever had to deal with either. 😉

                Steve

                C 1 Reply Last reply Reply Quote 0
                • C
                  cyberbot @stephenw10
                  last edited by

                  @stephenw10

                  where this comes from ?

                  priority=4,id=e839.3511.faab,key=0
                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    From your switch log.

                    C 1 Reply Last reply Reply Quote 0
                    • C
                      cyberbot @stephenw10
                      last edited by

                      @stephenw10 said in LACP not working:

                      From your switch log.

                      I just spoke with our ISP and they thing the Pfsense is running a strict mode and we have to disable it on the lag.
                      I tried this command

                      net.link.lagg.0.lacp.lacp_strict_mode

                      but it s comes back command not found.

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by stephenw10

                        It's now global so use:

                        [2.4.5-RELEASE][admin@244dev.stevew.lan]/root: sysctl net.link.lagg.lacp.default_strict_mode=0
net.link.lagg.lacp.default_strict_mode: 1 -> 0

                        Is the switch not yours then?

                        Steve

                        C 1 Reply Last reply Reply Quote 0
                        • C
                          cyberbot @stephenw10
                          last edited by cyberbot

                          @stephenw10 said in LACP not working:

                          It's now global so use:

                          [2.4.5-RELEASE][admin@244dev.stevew.lan]/root: sysctl net.link.lagg.lacp.default_strict_mode=0
net.link.lagg.lacp.default_strict_mode: 1 -> 0

                          Is the switch not yours then?

                          Steve

                          on the system>>tunnel I've created net.link.lagg.0.lacp.lacp_strict_mode and value 0
                          I've created the runnable file and applied value 1, after I've run the command to change it to 0 using the command line but it didn't change it to 0.
                          running the command

                          [2.4.5-RELEASE][admin@244dev.stevew.lan]/root: sysctl net.link.lagg.lacp.default_strict_mode=0

                          would overnight the system tuneable?

                          the LACP on the switch still shows blocked unfortunately

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            The switch should be in active mode by default too so strict LACP should still allow the interface to come up. It is possible to set it to passive mode but I don't think yours is.

                            C 1 Reply Last reply Reply Quote 0
                            • C
                              cyberbot @stephenw10
                              last edited by cyberbot

                              @stephenw10 said in LACP not working:

                              The switch should be in active mode by default too so strict LACP should still allow the interface to come up. It is possible to set it to passive mode but I don't think yours is.

                              do I have to do something to force the LAGG to come online ?
                              this the LAG config on the switch.

                              1/1/1      Up      Blocked Full 1G    1     No  141  0   609c.9f4b.808c  WAN1
2/1/1      Up      Blocked Full 1G    1     No  141  0   609c.9f4b.808c  WAN2

                              and log on the switch

                              Nov 27 05:19:39:I:System: dynamic lag interface 1/1/1's peer info (priority=4,id=e839.3511.faab,key=0) mis-matches with lag's peer info (priority=32768,id=e839.3511.faab,key=715), set to mismatch Error
Nov 27 05:19:38:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is up.
Nov 27 05:19:38:I:Trunk: Group (1/1/1, 2/1/1) created by 802.3ad link-aggregation module.
Nov 27 05:19:35:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is down.
Nov 27 05:19:32:I:System: dynamic lag interface 2/1/1's peer info (priority=3,id=e839.3511.faab,key=0) mis-matches with lag's peer info (priority=32768,id=e839.3511.faab,key=715), set to mismatch Error
Nov 27 05:19:32:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is down.
Nov 27 05:19:32:I:Trunk: Group (1/1/1, 2/1/1) removed by 802.3ad link-aggregation module.
Nov 27 05:19:32:I:System: Logical link on dynamic lag interface ethernet 2/1/1 is down.
Nov 27 05:19:32:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is down.
Nov 27 05:19:32:I:System: dynamic lag interface 1/1/1's peer info (priority=4,id=e839.3511.faab,key=0) mis-matches with lag's peer info (priority=32768,id=e839.3511.faab,key=715), set to mismatch Error
Nov 27 05:19:31:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is up.
Nov 27 05:19:31:I:Trunk: Group (1/1/1, 2/1/1) created by 802.3ad link-aggregation module.
Nov 27 05:19:28:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is down.
Nov 27 05:19:25:I:System: dynamic lag interface 2/1/1's peer info (priority=3,id=e839.3511.faab,key=0) mis-matches with lag's peer info (priority=32768,id=e839.3511.faab,key=715), set to mismatch Error
Nov 27 05:19:25:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is down.
Nov 27 05:19:25:I:Trunk: Group (1/1/1, 2/1/1) removed by 802.3ad link-aggregation module.
Nov 27 05:19:25:I:System: Logical link on dynamic lag interface ethernet 2/1/1 is down.
Nov 27 05:19:25:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is down.

                              I come some forum which they said to run those commands

                              > sysctl net.link.lagg.default_use_flowid=0 
> sysctl net.link.lagg.0.use_flowid=0 
> sysctl net.link.lagg.1.use_flowid=0

                              can you advies wither to do this won't crash a production firewall.

                              thank you

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Reviewing this there seem to be some differences in your early replies here.
                                The lagg has a different MAC and seems to be connected to the same switch...

                                Are you 100% confident on these are connected to the correct ports?

                                Those values are defaults as far as I know so that should make no difference.
                                What I have here:

                                [2.4.5-RELEASE][admin@7100.stevew.lan]/root: sysctl net.link.lagg
net.link.lagg.default_flowid_shift: 16
net.link.lagg.default_use_flowid: 0
net.link.lagg.failover_rx_all: 0
net.link.lagg.lacp.default_strict_mode: 1
net.link.lagg.lacp.debug: 0

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • C
                                  cyberbot
                                  last edited by cyberbot

                                  @cyberbot said in LACP not working:

                                  1/1/1 Up Blocked Full 1G 1 No 141 0 609c.9f4b.808c WAN1
                                  2/1/1 Up Blocked Full 1G 1 No 141 0 609c.9f4b.808c WAN2

                                  Hi Steve,
                                  when I google the error it comes back with wrong ports, but I am very confident that are connected to the correct ports
                                  as showen here

                                  1/1/1      Up      Blocked Full 1G    1     No  141  0   609c.9f4b.808c  WAN1
2/1/1      Up      Blocked Full 1G    1     No  141  0   609c.9f4b.808c  WAN2

                                  port 1 of Switch 1 and Port 1 of Switch 2 are the LACP.
                                  I can see them when I do show interface brief

                                  now somehow port 1 just went into forward.

                                  === LAG "WAN" ID 1 (dynamic Deployed) ===
LAG Configuration:
   Ports:         e 1/1/1 e 2/1/1
   Port Count:    2
   Primary Port:  1/1/1
   Trunk Type:    hash-based
   LACP Key:      20001
Deployment: HW Trunk ID 1
Port       Link    State   Dupl Speed Trunk Tag Pvid Pri MAC             Name
1/1/1      Up      Forward Full 1G    1     No  141  0   609c.9f4b.808c  WAN1
2/1/1      Up      Blocked Full 1G    1     No  141  0   609c.9f4b.808c  WAN2

Port       [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
1/1/1           1        1   20001   Yes   L   Agg  Syn  Col  Dis  No   No   Ope
2/1/1           1        1   20001   Yes   S   Agg  Syn  Col  Dis  No   No   Ina


 Partner Info and PDU Statistics
Port          Partner         Partner     LACP      LACP
             System ID         Key     Rx Count  Tx Count
1/1/1    32768-e839.3511.faab      715        4         8
2/1/1    32768-e839.3511.faab      715        5         9
                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by stephenw10

                                    Port 1 is set as Long timeouts, that same as pfSense. Port 2 is set to Short and it still blocked.

                                    That definitely looks like the problem. If you have not yet, redeploy it to take the Long setting. I assume Switch 1 may have rebooted or something.

                                    Steve

                                    C 1 Reply Last reply Reply Quote 0
                                    • C
                                      cyberbot @stephenw10
                                      last edited by

                                      @stephenw10 said in LACP not working:

                                      Port 1 is set as Long timeouts, that same as pfSense. Port 2 is set to Short and it still blocked.

                                      That definitely looks like the problem. If you have not yet, redeploy it to take the Long setting. I assume Switch 1 may have rebooted or something.

                                      Steve

                                      Thank you Steve for your answers.
                                      do i have to do this on the port or LAG?

                                      device(config)# lag blue dynamic id 1
device(config-lag-blue)# lacp-timeout short
LAG blue un-deployed successfully!
LAG blue deployed successfully!
device(config-lag-blue)#

                                      this hwat i do and it still shows the diferrences on the TIO.

                                      1 Reply Last reply Reply Quote 0
                                      • C
                                        cyberbot
                                        last edited by cyberbot

                                        i have managed to set the long TIO on the LAG, but unfortunately it still shows blocked

                                        LAG.PNG

                                        and switch log

                                        Nov 27 23:17:46:I:System: dynamic lag interface 1/1/1's peer info (priority=4,id=e839.3511.faab,key=0) mis-matches with lag's peer info (priority=32768,id=e839.3511.faab,key=715), set to mismatch Error
Nov 27 23:17:45:I:System: Logical link on dynamic lag interface ethernet 1/1/1 is up.
                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Ok this is what my lacp config section looks like in the switch from show running:

                                          lag lacp1 dynamic id 2047
 ports ethernet 1/2/1 ethernet 1/2/3 
 primary-port 1/2/1
 lacp-timeout long 
 deploy

                                          Very simple.
                                          You must have something else in there to generate that mis-match error.

                                          Steve

                                          C 1 Reply Last reply Reply Quote 0
                                          • C
                                            cyberbot @stephenw10
                                            last edited by

                                            @stephenw10 said in LACP not working:

                                            running

                                            this what show running show

                                            !
lag WAN dynamic id 1
 ports ethernet 1/1/1 ethernet 2/1/1
 primary-port 1/1/1
 lacp-timeout long
 deploy
 port-name WAN1 ethernet 1/1/1
 port-name WAN2 ethernet 2/1/1
!
lag wan dynamic id 5
 lacp-timeout long
!
!
!
                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.