SFP
-
This post is deleted! -
-
This is all the module has on it's label. sorry about the bad pics phone has difficulty with low light.
-
Ok so what's the part number? I can't really read that. It is 3fe...something as I thought it would be.
That should define exactly what it is but it may not help much. There doesn't appear to be any option to force the Chelsio NIC to accept any module in the FreeBSD driver.
What is the error it shows exactly?
-
@stephenw10 3FE46899AAAA...DMESG simply says (UNKNOWK TRANSCEIVER INSERTED)
-
https://www.youtube.com/watch?v=5WWO_4p4UP0
This gentleman used a Nokia transceiver also...I am using the same Chelsio T420 but getting the error.
-
Probably not the same Nokia transceiver though.
May also have been different firmware on the NIC.
-
@stephenw10 I got the new gpons today inserted them and got no error like before (unknown module) pfSense seems to recognize the new GPONS however I get the following error on boot CXGBE0: l1cfg failed: 22...any idea what this might be?
-
What are these new devices specifically?
And this is in a Chelsio T420?
Looks like it's failing to set the Layer 1 config (speed/duplex/flow-control):
https://github.com/freebsd/freebsd/blob/master/sys/dev/cxgbe/t4_main.c#L5192Steve
-
@stephenw10 https://www.provantage.com/ubiquiti-networks-uf-instant~7UBNT0UC.htm
