offloading OpenVPN using external gateway

chrispazz

@bingo600 yes is 5.99 :) don't hate me eheheh

bingo600

So we have confirmed that the ICMP (ping) packages are actually being "policy routed" from 5.1 (pfSense) to 5.99 (RasPI)

We don't see any Echo reply ... The issue is probably on the RasPI

bingo600

On the Raspi (as root)

What does a : sudo iptables -L show ?

And this one ?

chrispazz

This post is deleted!

bingo600

Did you reboot the RasPI after enabling forwarding ?

chrispazz

@bingo600 yes, forward is activated.

Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT icmp -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere tcp dpt:ssh
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED

Chain FORWARD (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

and yes, I rebooted it a lot of times :)

bingo600

@chrispazz

Does this one give the expected result , should be your (OpenVPN public ip) ?

wget http://ipinfo.io/ip -qO -

Can you ping the google.it from the RasPI ?

/Bingo

chrispazz

@bingo600 said in offloading OpenVPN using external gateway:

wget http://ipinfo.io/ip -qO -

Both yes.
And if I test a traceroute from raspi I can confirm it is going outside using VPN connection....

bingo600

@chrispazz

Now : I would connect a PC directly to the RasPI , or directly to the ISP inside LAN , and set def-gw to the RasPI , and maybe DNS to 8.8.8.8

Then start debugging directly between the PC & The Raspi.

This can come in handy ... Disables all iptables stuff on the Raspi.
But only for this "boot sesion"

iptables -F
iptables -X
iptables -t nat -F
iptables -t nat -X
iptables -t mangle -F
iptables -t mangle -X
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT

I use these rules on my Deb10 machines , for OVPN to a VPN provider.

Remember to replace ens192 with the name of your ethernet interface on the Raspi.

# Default policy to drop all incoming packets
iptables -P INPUT DROP
iptables -P FORWARD DROP

# Accept incoming packets from localhost and the LAN interface
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -i ens192 -j ACCEPT

# Accept incoming packets from the WAN if the router initiated
# the connection
iptables -A INPUT -i tun0 -m conntrack \
    --ctstate ESTABLISHED,RELATED -j ACCEPT

# Forward LAN packets to the WAN
iptables -A FORWARD -i ens192 -o tun0 -j ACCEPT

# Forward WAN packets to the LAN if the LAN initiated the
# connection
iptables -A FORWARD -i tun0 -o ens192 -m conntrack \
    --ctstate ESTABLISHED,RELATED -j ACCEPT

# NAT traffic going out the WAN interface
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
#

Remember to save new rules if you change them

sudo systemctl enable netfilter-persistent

chrispazz

@bingo600 said in offloading OpenVPN using external gateway:

sudo systemctl enable netfilter-persistent

I made some other tests.

Raspberry is working good if I set a client to use it as network interface gateway and connection will go thru VPN (using my own iptables rules or yours).

So it seems that when I go thru pfsense, WAN main gateway (ISP router) is getting used instead of firewall rule gateway...

bingo600

@chrispazz said in offloading OpenVPN using external gateway:

@bingo600 said in offloading OpenVPN using external gateway:

sudo systemctl enable netfilter-persistent

I made some other tests.

Raspberry is working good if I set a client to use it as network interface gateway and connection will go thru VPN (using my own iptables rules or yours).

So it seems that when I go thru pfsense, WAN main gateway (ISP router) is getting used instead of firewall rule gateway...

That doesn't make sense
The packet trace you made doesn't lie.

bingo600

Now is the time to use tcpdump on the RasPI

https://kalitut.com/record-network-traffic-with-raspberry/

To see what it actually receives & forwards

chrispazz

@bingo600
This is traceroute from the client with the firewall rule applies:

traceroute to www.google.it (216.58.215.227), 64 hops max, 52 byte packets
1 192.168.5.254 (192.168.5.254) 2.370 ms 1.583 ms 1.516 ms

The first hop go to ISP gateway....I can't see Raspi here...

bingo600

@chrispazz
But that is not consistent with the packet trace you made on the pfSense

Can you do another trace , and then the traceroute ?

chrispazz

@bingo600 if I try a trace to www.google.it IP address as host I get this:

18:25:31.846958 IP 192.168.5.1.4704 > 172.217.168.35.443: UDP, length 1350
18:25:31.883433 IP 172.217.168.35.443 > 192.168.5.1.4704: UDP, length 1350

so it is using 192.168.5.1 as gateway....

chrispazz

@chrispazz Perhaps I understand the problem.

My WAN interface is getting IP from ISP router (DHCP server on 192.168.5.0).
The ISP gateway is getting on top of the firewall rule gateway....

This is WAN if on pfsense:

em1.90: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1492
options=3<RXCSUM,TXCSUM>
ether 02:11:32:25:4e:f9
inet6 fe80::11:32ff:fe25:4ef9%em1.90 prefixlen 64 scopeid 0x8
inet 192.168.5.1 netmask 0xffffff00 broadcast 192.168.5.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 90 vlanpcp: 0 parent interface: em1
groups: vlan

chrispazz

No wrong.

192.168.5.1 is pfsense.... :(

bingo600

@chrispazz said in offloading OpenVPN using external gateway:

@bingo600 if I try a trace to www.google.it IP address as host I get this:

18:25:31.846958 IP 192.168.5.1.4704 > 172.217.168.35.443: UDP, length 1350
18:25:31.883433 IP 172.217.168.35.443 > 192.168.5.1.4704: UDP, length 1350

so it is using 192.168.5.1 as gateway....

Nope
It's using 5.1 as source IP (Consistent with your WAN NAT)

If you enable logging on the Policy rule , do you see any log lines ?

Now you are not doing the traceroute on the pfSense box ... Are you ?

What PC ip address are you doing the traceroute from , and are you 100% sure you have that ip in the OPENVPN Alias , and a policy route rule on the pfSense interface that that PC is connected to ?

chrispazz

@bingo600 said in offloading OpenVPN using external gateway:

If you enable logging on the Policy rule , do you see any log lines ?

Yes, it is the only rules that has logging

Now you are not doing the traceroute on the pfSense box ... Are you ?

No, I am doing it from iMac client (192.168.20.110)

What PC ip address are you doing the traceroute from , and are you 100% sure you have that ip in the OPENVPN Alias , and a policy route rule on the pfSense interface that that PC is connected to ?

I am using a firewall rule like this on the same interface of the client (192.168.20):

and NVPNGTW is the gateway I added to pfsense in the gateway section.

bingo600

@chrispazz said in offloading OpenVPN using external gateway:

@bingo600 said in offloading OpenVPN using external gateway:

If you enable logging on the Policy rule , do you see any log lines ?

Yes, it is the only rules that has logging

Now you are not doing the traceroute on the pfSense box ... Are you ?

No, I am doing it from iMac client (192.168.20.110)

What PC ip address are you doing the traceroute from , and are you 100% sure you have that ip in the OPENVPN Alias , and a policy route rule on the pfSense interface that that PC is connected to ?

I am using a firewall rule like this on the same interface of the client (192.168.20):

and NVPNGTW is the gateway I added to pfsense in the gateway section.

That's a (for me strange rule) why does it have WAN all the way to the right ?
Are you using floating rules ?