-
@stephenw10 Same at System > Updates
-
@stephenw10 - I turned off the State Table and I can still get to the system:update option, it seems to be just the main dashboard that has the issue - turning off the State Table option also disables the CPU activity display.
-
@aschenbecher said in After 2.5.0 update, Dashboard never receives update statue for version:
@edmund For me it´s not helping, still "Unable to check for updates" :( (since 2.5, before everything was fine)
Actually reviewing this are you saying that is does complete the update check but returns 'Unable to check for updates' ? Because that's an entirely different issue if so. You should open a new thread.
Steve
-
@stephenw10 at the moment I just want to downgrade
I have some problems with DualWan aswell since upgrade... -
On your own hardware? Open a ticket if you need a 2.4.5 image. https://go.netgate.com/
Steve
-
@stephenw10 said in After 2.5.0 update, Dashboard never receives update statue for version:
https://go.netgate.com/
Yes, Im using PC Engines APU2. There is no other way to get a link for the old image?
-
Not currently. Not officially at least. We can normally reply there in minutes though.
Steve
-
@stephenw10 Ok , I found the reason: Since I have multi Wan using 2 Gateway groups with failover, I have disabled the default Gateway (Routing > Default gateway > none). Thats the reason the console has no internet and cant check for updates. After changing it to automatic, Im receiving updates. Now I reverted back to 2.4.4 and there I can check for updates even without set a default gateway!
-
I have the same issues: "Obtaining upgrade status" and "Retrieving CPU data" are stuck on the turning cog. Check under System | Update shows that I'm on the current version - "Status Up to date."
OpenVPN, pfBlockerNG are working fine. NO issue with unbound (fingers crossed).
-
And you have the state-table size field displayed in the widget?
If so it's probably script blocking in your browser.
Steve
-
@stephenw10 - No. I just rerified that the "state-table size" field is not selected in the widget.
Verified in Firefox 86.0 (64-bit) and Chrome 88.0.4324.182 (Official Build) (64-bit) under Ubuntu 20.10 x86_64.
-
Ah, OK. Then you're hitting the bug detailed above.
-
@stephenw10 Enabled "state-table size" and it works. I think is reversed the suggested workaround (e.g., it should not be enabled rather than it should be enabled...)
-
@stephenw10 said in After 2.5.0 update, Dashboard never receives update statue for version:
https://redmine.pfsense.org/issues/11443
The bug report title is: Disabling 'State Table Size' prevents other data being displayed
So don't do that.
...or use the patch linked there is you really don't want the state table size displayed before p2.
Steve
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.