After 2.5.0 update, Dashboard never receives update statue for version

aschenbecher

@stephenw10 at the moment I just want to downgrade I have some problems with DualWan aswell since upgrade...

stephenw10

On your own hardware? Open a ticket if you need a 2.4.5 image. https://go.netgate.com/

Steve

aschenbecher

@stephenw10 said in After 2.5.0 update, Dashboard never receives update statue for version:

https://go.netgate.com/

Yes, Im using PC Engines APU2. There is no other way to get a link for the old image?

stephenw10

Not currently. Not officially at least. We can normally reply there in minutes though.

Steve

aschenbecher

@stephenw10 Ok , I found the reason: Since I have multi Wan using 2 Gateway groups with failover, I have disabled the default Gateway (Routing > Default gateway > none). Thats the reason the console has no internet and cant check for updates. After changing it to automatic, Im receiving updates. Now I reverted back to 2.4.4 and there I can check for updates even without set a default gateway!

nfld_republic

I have the same issues: "Obtaining upgrade status" and "Retrieving CPU data" are stuck on the turning cog. Check under System | Update shows that I'm on the current version - "Status Up to date."

OpenVPN, pfBlockerNG are working fine. NO issue with unbound (fingers crossed).

stephenw10

And you have the state-table size field displayed in the widget?

If so it's probably script blocking in your browser.

Steve

nfld_republic

@stephenw10 - No. I just rerified that the "state-table size" field is not selected in the widget.

Verified in Firefox 86.0 (64-bit) and Chrome 88.0.4324.182 (Official Build) (64-bit) under Ubuntu 20.10 x86_64.

stephenw10

Ah, OK. Then you're hitting the bug detailed above.

nfld_republic

@stephenw10 Enabled "state-table size" and it works. I think is reversed the suggested workaround (e.g., it should not be enabled rather than it should be enabled...)

stephenw10

@stephenw10 said in After 2.5.0 update, Dashboard never receives update statue for version:

https://redmine.pfsense.org/issues/11443

The bug report title is: Disabling 'State Table Size' prevents other data being displayed
So don't do that.

...or use the patch linked there is you really don't want the state table size displayed before p2.

Steve