Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Grafana Dashboard using Telegraf with additional plugins

    pfSense Packages
    28
    173
    59.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • W
      wrightsonm
      last edited by

      @victorrobellini i'll pull down the latest update this eve and take a look. (thanks in advance) I have a few more cpu cycles available in my setup:

      NUC10i7FNK -> proxmox -> debian vm -> docker -> influxdb

      Latest update on the ntopng experiment. It is up and running. Had to customise the startup script such that I could create custom applications in the GUI. Bit of a pain that a key feature isn't supported OOTB.

      I've noticed that Network Discovery gets itself confused and assigns device names incorrectly based on mdns. Haven't found a way to turn this off yet. For example, sometimes ntopng thinks my firewall network interface is called "google home mini", which is clearly incorrect. It might be related to running avahi / pimd to get chromecast running across vlans. More investigations to follow.

      Haven't tried exporting ntopng to influxdb yet.
      I'm in 2 minds to skip over ntopng and investigate elastiflow instead.

      W 1 Reply Last reply Reply Quote 0
      • W
        wrightsonm @wrightsonm
        last edited by

        @VictorRobellini I've pulled down the latest version of the conf, plugins and dashboard and I have noticed 1 thing that has stopped working.

        This is the old gateway RTT dashboard. Also note the Gateway list:
        702c58c8-4a08-45f1-8c6c-ca31775a4a06-image.png

        This is the new dashboard. The gateway names have changed and RTT chart is no longer working. Does it work for you?
        5f91b997-a192-4fd8-a5f3-a4bf9f35df9f-image.png

        When running telegraf --test I think this is the relevant snippet after changing the dashboard and plugins to the new version:

        > gateways,host=fw,interface=igb0 defaultgw=1,delay=2.117,gwdescr="Interface WAN_DHCP Gateway",loss=0,monitor="192.168.0.1",source="192.168.0.30",status="online",stddev=3.885,substatus="none" 1619643426000000000
> gateways,host=fw,interface=igb0 defaultgw=0,delay=0,gwdescr="Interface WAN_DHCP6 Gateway",loss=0,monitor="",source="",status="",stddev=0,substatus="" 1619643426000000000
> gateways,host=fw,interface=igb0 defaultgw=1,delay=2.117,gwdescr="Interface WAN_DHCP Gateway",loss=0,monitor="192.168.0.1",source="192.168.0.30",status="online",stddev=3.885,substatus="none" 1619643426000000000
> gateways,host=fw,interface=igb0 defaultgw=0,delay=0,gwdescr="Interface WAN_DHCP6 Gateway",loss=0,monitor="",source="",status="",stddev=0,substatus="N/A" 1619643426000000000
        V 1 Reply Last reply Reply Quote 0
        • V
          VictorRobellini @wrightsonm
          last edited by

          @wrightsonm
          Did you drop your gateways measurement? I eliminated unused tags in the influx data. I added a blurb in the Readme about things not rendering properly.

          1 Reply Last reply Reply Quote 0
          • J
            jpetovello
            last edited by

            Great looking dashboard!

            Wondering if there are step by step instructions on how to go about installing and configuring, as I'm finding the github instructions rather lacking.

            V 1 Reply Last reply Reply Quote 0
            • W
              wrightsonm
              last edited by

              Ok so steps i've performed so far. I think there are bugs in the latest git repository.

              docker exec -it influxdb /bin/sh

influx delete --bucket pfsense --start '1970-01-01T00:00:00Z' --stop $(date +"%Y-%m-%dT%H:%M:%SZ")  --predicate '_measurement="tail_dnsbl_log"'

influx delete --bucket pfsense --start '1970-01-01T00:00:00Z' --stop $(date +"%Y-%m-%dT%H:%M:%SZ")  --predicate '_measurement="tail_ip_block_log"'

influx delete --bucket pfsense --start '1970-01-01T00:00:00Z' --stop $(date +"%Y-%m-%dT%H:%M:%SZ")  --predicate '_measurement="gateways"' --org-id [id]

influx delete --bucket pfsense --start '1970-01-01T00:00:00Z' --stop $(date +"%Y-%m-%dT%H:%M:%SZ")  --predicate '_measurement="interface"' --org-id [id]

              If your WAN config looks like mine with ipv4 and ipv6 enabled, then you end up with a problem with the gateways telegraf lines as igb0 exists twice. Gateways used to use gateway_name probably for this reason. It means that the tag grouping won't work if you have ivp4 and ipv6 enabled.

              So i've had to change telegraph_gateways.php to include gateway_name and then adjust the grafana dashboard to use gateway_name instead of interface. (basically reverting it back to how it worked on the previous revision.

              Next issue is telegraf is nolonger exporting the interface measurement.

              Looks like this changeset replaced "interface" with "gateways". Looks like a copy paste issue to me.
              github diff

              As a result of this problem, none of the interfaces show up correctly on the dashboards.
              The interface summaries work with the old version of telegraf_pfinterface.php

              Final note, is this dashboard now requires a 1440p monitor to view everything without horizontal scrolling. Would be nice if it would display on 1080p monitors

              W V 2 Replies Last reply Reply Quote 0
              • W
                wrightsonm @wrightsonm
                last edited by wrightsonm

                @wrightsonm
                This is the dashboard working once again for me:

                30209c7e-4ed6-405a-8d7f-f3db254d2e0c-image.png

                telegraf --test --config /usr/local/etc/telegraf.conf

                Grafana Gateway Variable changed back to:

                SHOW TAG VALUES FROM "gateways" WITH KEY = "gateway_name" WHERE "host" =~ /^$Host$/

                Modified plugins:
                telegraf_gateways.php.txt

                Reverted plugin:
                telegraf_pfinterface.php.txt

                Modified dashboard:
                grafana.json.txt

                1 Reply Last reply Reply Quote 0
                • V
                  VictorRobellini
                  last edited by

                  @wrightsonm said in Grafana Dashboard using Telegraf with additional plugins:

                  with ipv4 and ipv6 enabled, then you end up with a problem with the gateways telegraf lines as igb0 exists twice

                  Does this happen for the interface table? If you are willing to troubleshoot this with me, please open a github issue so we don't flood this thread with troubleshooting.

                  W 1 Reply Last reply Reply Quote 0
                  • V
                    VictorRobellini @jpetovello
                    last edited by

                    @jpetovello This is a pet project I built for use with my homelab and documented to help others. The main prereqs are that you have influx and grafana already set up. I didn't document that since everyone is going to have their systems set up differently. Luckily, there's no shortage of tutorials available online. My recommendation is to get your influxdb and grafana setup, read the github readme, read through this thread, and search the closed issues in the github project.

                    1 Reply Last reply Reply Quote 0
                    • W
                      wrightsonm @VictorRobellini
                      last edited by

                      @victorrobellini yeah sure. I've not got any time until Tuesday now. The solution is in the attachments and pictures above. I can raise a Pull Request with the fixes on Tuesday if you like?

                      V 1 Reply Last reply Reply Quote 0
                      • V
                        VictorRobellini @wrightsonm
                        last edited by VictorRobellini

                        @wrightsonm I just reread what you wrote. I have no idea how that happened. Thanks for the heads up. I may just merge the 2 scripts since they are doing very similar stuff. I'll take a look this weekend.

                        Update: I merged the scripts and updated the repo. Everything should be working now.

                        1 Reply Last reply Reply Quote 0
                        • V
                          VictorRobellini @wrightsonm
                          last edited by

                          @wrightsonm said in Grafana Dashboard using Telegraf with additional plugins:

                          Final note, is this dashboard now requires a 1440p monitor to view everything without horizontal scrolling.

                          Sorry, I run this on either a 4k or an ultrawide 1080p display. If you have it reformatted for 1080p just add the json with a new name and submit a PR.

                          1 Reply Last reply Reply Quote 0
                          • von PapstV
                            von Papst
                            last edited by

                            I copied the new scripts for plugin and configured permissions on them (755), imported new dashboard but now I'm not getting any temperatures reading, IP or DNSBL lists, no network interface summary, no Gateway RTT or loss. Any hint what I missed in the upgrade process?

                            von PapstV 1 Reply Last reply Reply Quote 0
                            • von PapstV
                              von Papst @von Papst
                              last edited by

                              @von-papst Got temperatures working (CRLF from M$ messed up script). Still missing lists from pfblocker-ng and interface summary.

                              W 1 Reply Last reply Reply Quote 0
                              • W
                                wrightsonm @von Papst
                                last edited by

                                @von-papst check the CRLF on all the plugins. Then use the telegraf test command to check that there are no errors. Failing that add the debug logging option to telegraf and check the log file. Instructions for the above are on the GitHub readme.

                                von PapstV 2 Replies Last reply Reply Quote 1
                                • von PapstV
                                  von Papst @wrightsonm
                                  last edited by

                                  @wrightsonm Got pfblocker working, changed queries and added some info. But Gateway RTT and loss still not working.
                                  d20b125c-5fea-40f2-95f8-38287ff646dd-image.png

                                  1 Reply Last reply Reply Quote 0
                                  • von PapstV
                                    von Papst @wrightsonm
                                    last edited by

                                    @wrightsonm Got everything working now. I needed to modify some queries in the dashboard and added gateways.py script.

                                    V 1 Reply Last reply Reply Quote 0
                                    • J
                                      jpetovello
                                      last edited by

                                      I'm a bit confused, where do the plugins need to be placed? Am I supposed to upload them to my pfSense install?

                                      von PapstV 1 Reply Last reply Reply Quote 0
                                      • von PapstV
                                        von Papst @jpetovello
                                        last edited by

                                        @jpetovello you should upload them to you pfsense.

                                        1 Reply Last reply Reply Quote 0
                                        • V
                                          VictorRobellini @von Papst
                                          last edited by

                                          @von-papst @wrightsonm

                                          I think there was some drift between my local system and my repo. I've updated the dashboard JSON. It should work with the updated gateways/interface plugin.

                                          W 1 Reply Last reply Reply Quote 0
                                          • W
                                            wrightsonm @VictorRobellini
                                            last edited by

                                            @victorrobellini What is your influxdb ram utilisation looking like with the latest set of changes? With the grafana dashboard, my influxdb ram has increased to 12GB. I had to increase the RAM allocation on my docker VM (now at 20GB). I'm going to keep an eye on it.

                                            I think high series cardinality might be related. Will do some investigations. Unfortunately InfluxDB OSS v2 doesn't currently implement the cardinality command (only Cloud version at the moment).
                                            https://docs.influxdata.com/influxdb/v2.0/reference/flux/stdlib/influxdb/cardinality/

                                            I also think the logged data shows something port scanning me yesterday which may be related to the big increase in cardinality of the data.

                                            V 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post