Enabling IPv6 on Comcast home network
-
@johnpoz said in Enabling IPv6 on Comcast home network:
But did you actually get a prefix that you requested?
One thing that can be done is run a packet capture on boot up, to see what's being provided. To do that:
Shut down pfsense and disconnect the WAN cable
Reboot pfsense and start Packet Capture, filtering on port 546
Reconnect the WAN cable
Post the capture file here. -
@jknott said in Enabling IPv6 on Comcast home network:
@lenhuppe said in Enabling IPv6 on Comcast home network:
I have Comcast and a rented cable modem.
Is the modem in bridge or gateway mode? You want bridge mode.
I should contact Comcast and tell them I need to access the cable modem. The last time I tried that they gave me hard time. Comcast is a terrible company and even worse ISP.
-
@lenhuppe said in Enabling IPv6 on Comcast home network:
The "DHCPv6 Prefix Delegation size" defaults to 64 on the WAN side and the "IPv6 Prefix ID" defaults to 0 on the LAN side.
The proper value depends on what prefix size they provide. For example, I get a /56 from my provider. The prefix ID is used to select which /64 from your prefix you want to use on an interface.
-
You might be able to do that yourself. Post the make and model here and perhaps someone knows. Otherwise, a search on the net may provide the info.
-
@jknott said in Enabling IPv6 on Comcast home network:
You might be able to do that yourself. Post the make and model here and perhaps someone knows. Otherwise, a search on the net may provide the info.
I have accessed the cable modem and found the "Delegated prefix" number. Its an Xfinity CGM4140COM if that helps at all. I just need to know where to enter the prefix.
-
@jknott said in Enabling IPv6 on Comcast home network:
@lenhuppe said in Enabling IPv6 on Comcast home network:
I have Comcast and a rented cable modem.
Is the modem in bridge or gateway mode? You want bridge mode.
If I try to enable bridge mode it warns that wifi will not work in bridge mode. I need wifi so I can't switch to bridge.
-
@johnpoz said in Enabling IPv6 on Comcast home network:
But did you actually get a prefix that you requested? There are some threads around here talking about how to troubleshoot that.. @JKnott prob the guy you want to help with this.. He loves IPv6 ;) My advice would be to just turn it off.. Or just run a HE tunnel.
They will give you a free /48 and you can take it with you if you change ISPs.. They allow for PTR settings on the IPv6 addresses, etc. Many reasons why its just easier than dealing with some lack luster isp IPv6 deployments.
On the WAN side DHCPv6 Prefix Delegation size is set to 64 and the the router has a delegation prefix ending in ::64 so I think that I am getting the /64 prefix as requested.
-
If you're not in bridge mode, you will only be able to get a single /64, which pfsense cannot split among your LAN interfaces. Here I have a modem that includes home phone and I also have IPTV. Instead of using the built in WiFi, I have a separate access point, which is mounted roughly in the middle of my condo. Bridge mode had no effect on my home phone or IPTV.
PfSense running on Qotom mini PC
i5 CPU, 4 GB memory, 32 GB SSD & 4 Intel Gb Ethernet ports.
UniFi AC-Lite access pointI haven't lost my mind. It's around here...somewhere...
-
So NOT a modem - but a gateway... Which is why I asked for model...
Yeah its not going to work with one of their shitty gateways. I should of known that as soon as you said rent - they don't rent modems any more, only gateway.. Back in the day they just gave you a modem..
Get yourself a MODEM.. and then an AP and save yourself some money in the long vs paying them rent for the hardware.
Or - just use HE for ipv6... But you still going to have issues with your wifi stuff off their gateway and then stuff behind pfsense.
If your going to use pfsense - all you want is modem.. Get a docsis 3.1, maybe even one the new ones with 2.5gbps interfaces to future proof yourself when you want over 1gig internet.
How much are they raping you on rent? $10 a month.. Depending on what you get you could break even on the rent in a year or so and then anything after that is just saved money..
-
@johnpoz said in Enabling IPv6 on Comcast home network:
So NOT a modem - but a gateway... Which is why I asked for model...
Well, the box I got from my ISP can be configured as a modem (in bridged mode) or gateway. What would you call it. It's been a long time since my ISP provided a plain modem. Even back around 2008 or so, it was difficult to get the local phone company to provide a basic ADSL modem. You had to get their gateway and configure it for bridge mode. And that was for business customers.
-
While yes some gateways can be put into bridge mode - but as he mentioned that kills his wifi. But as soon as he said rent I should of know why it wasn't working is because he was already behind a nat, etc.
If he had just actual modem - would of worked right out of the box pretty much.
I specifically asked right up front
Is there some isp router in front of pfsense? Or just a cable modem - what is the device your plugging pfsense into?
-
@johnpoz said in Enabling IPv6 on Comcast home network:
but as he mentioned that kills his wifi
Mine too. When it's in bridge mode, all I get is the modem function.
-
@jknott said in Enabling IPv6 on Comcast home network:
all I get is the modem function.
Are you paying the isp for this device? Not sure why I would have a gateway device if all I am going to do is use it in modem mode.. I sure and the hell would not pay any sort of fee or rent to have this device from the ISP when I can buy a perfectly good "modem" that should last 3-5 years.. Way longer than needed to pay for itself vs rental fees to isp.
Just looked current "modem" I get back in sept 2017.. Cost me $110 rounded up... If would of been paying rent I would be at like $460 spent so far.. So looked I saved $350 to date.. Prob get another year out of it if not longer.. Only reason really would change it out is I increased isp speed and needed docsis 3.1. Or if it fails - which it has already paid for itself twice over.
An intelligent man is sometimes forced to be drunk to spend time with his fools
If you get confused: Listen to the Music Play
Please don't Chat/PM me for help, unless mod related
SG-4860 24.11 | Lab VMs 2.7.2, 24.11 -
@johnpoz said in Enabling IPv6 on Comcast home network:
@jknott said in Enabling IPv6 on Comcast home network:
all I get is the modem function.
Are you paying the isp for this device? Not sure why I would have a gateway device if all I am going to do is use it in modem mode.. I sure and the hell would not pay any sort of fee or rent to have this device from the ISP when I can buy a perfectly good "modem" that should last 3-5 years.. Way longer than needed to pay for itself vs rental fees to isp.
This is at a shared residence and yes the router is rented. I am going to the xfinity store to change the account asap. The last time I checked there was exactly one choice of modem that worked with comcast. That was a while ago so hopefully there are better choices nowadays.
-
@johnpoz said in Enabling IPv6 on Comcast home network:
Are you paying the isp for this device?
It is supplied by them and is included in the cost of the service. It also includes home phone.
I haven't seen a plain modem in years, from either the cable or phone companies. As I mentioned, even business customers get one of these gateway devices, where you disable the gateway if all you want is a modem. Through my work, I have set up several companies on one or the other companies.
BTW, they have replaced the device several times over the years. Most recently, when I got IPTV last year. I went from 2 boxes for Internet & home phone to one and my bandwidth went from 75/10 to 500/20, though as usual with this ISP, it was better than advertised. I have seen over 800 Mb on speedtest. A previous swap, from a Cisco "modem", got me IPv6, more bandwidth and a lower bill.
-
@jknott said in Enabling IPv6 on Comcast home network:
I haven't seen a plain modem in years
There are plenty of them for cable..
Top sellers right now
Motorola MB8600
Motorola MB8611 (2.5gbps interface)
ARRIS SURFboard SB8200
ARRIS Surfboard S33 (2.5gbps interface)
Motorola MB7621
Netgear CM600,CM1000,CM1100,CM1200
etc. etc..And there sure is way more than just 1 that works with comcast/xfinity..
It is supplied by them and is included in the cost of the service
Cable companies here - pretty much never replace unless it fails, they sure do not replace often enough to justify paying 10$ which is very common.
-
@johnpoz said in Enabling IPv6 on Comcast home network:
I haven't seen a plain modem in years
There are plenty of them for cable..
I know you can buy them, but the companies here don't seem to supply them.
pretty much never replace unless it fails
I've never had one fail, but I have had several replaced with changes in my service. I got my first cable modem, and it was just a modem, back in the @home days, in the late '90s. It was a Motorola, IIRC.
BTW, my ISP, Rogers, was one of the companies involved in developing the DOCSIS specs.
-
BTW I think xfinity rental fee is up to like $14 a month, and if have them do their xfinity fi nonsense its like $25 a month.. $300 a YEAR... Buy your own stuff.. You could get pretty fancy $200 2.5gig docsis modem and a couple of unifi AX AP and have that paid for in less then 18 months..
-
As I said, I don't have an option. The modem/gateway is included with the service. There is no option for providing your own. I believe the same is true with the phone company. However, some resellers may allow customer owned hardware. As I mentioned, there have been times when I got a new modem and my service increased while the cost went down.
-
That was really meant to the OP and any other viewer of the thread.
BTW - stuff I am reading is rogers just hides the "rental" fee..
