Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    After upgrade from 2.4 to 2.5.1 no Web GUI available

    Scheduled Pinned Locked Moved General pfSense Questions
    15 Posts 4 Posters 1.4k Views 4 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D Offline
      digidax
      last edited by digidax

      @jori56 I have only a Backup of config version 19.1
      Can I restore in 2.5.1 a confog from 19.1 (2.4.x) ?

      I only using the IP for accessing the Web GUI.
      It would be inetresting to find out, if it listening on the nginx port. Maybe also a firewall rule which controls the access to port 10000 is broken.

      M 1 Reply Last reply Reply Quote 0
      • M Offline
        mer @digidax
        last edited by

        @digidax is there anything in /var/log/nginx/error.log that indicates a problem?
        As for restoring the config, I'm not sure if the 2.4.x config will directly apply to the 2.5.1. There may be different packages and versions, but I think a lot of the config should work (NOTE: speculation, I've not tried it).

        1 Reply Last reply Reply Quote 0
        • D Offline
          digidax
          last edited by

          In /var/log/nginx/error.log there is from today only this: (time stamp is during the update)

          2021/06/14 09:30:53 [error] 71232#100869: send() failed (54: Connection reset by peer)
2021/06/14 09:42:02 [alert] 71232#100869: close() socket failed (9: Bad file descriptor)
2021/06/14 09:45:01 [error] 73452#100895: send() failed (54: Connection reset by peer)

          Additional now, DNS forwarding hast stoped working for the clients of the lan. Using now public DNS server as work around.

          M 1 Reply Last reply Reply Quote 0
          • M Offline
            mer @digidax
            last edited by

            @digidax Hmm. I'd be inclined to reset to factory defaults, reboot, then either try to apply the backup or to redo things one at a time by hand.

            1 Reply Last reply Reply Quote 0
            • D Offline
              digidax
              last edited by

              I will install 2.4.5-p1 and the config backup from this version to get back a stable system.

              1 Reply Last reply Reply Quote 0
              • jimpJ Offline
                jimp Rebel Alliance Developer Netgate
                last edited by

                The output in some of your commands is odd. If I had to guess, I'd say your system actually failed to upgrade and is (was?) not running a matching kernel and base OS.

                Your safest path forward is to wipe, reload, and restore a backup.

                Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                Need help fast? Netgate Global Support!

                Do not Chat/PM for help!

                1 Reply Last reply Reply Quote 0
                • D Offline
                  digidax
                  last edited by

                  Okay, before doing this I found the problem, have 100% used capacity:

                  [2.5.1-RELEASE][root@edge.localdomain]/root: df -hi
Filesystem            Size    Used   Avail Capacity iused ifree %iused  Mounted on
zroot/ROOT/default    438G    666M    437G     0%     24k  917M    0%   /
devfs                 1.0K    1.0K      0B   100%       0     0  100%   /dev
zroot/tmp             437G    180K    437G     0%      31  917M    0%   /tmp
zroot                 437G     88K    437G     0%       7  917M    0%   /zroot
zroot/var             437G     16M    437G     0%     203  917M    0%   /var
bootpool              1.9G    176M    1.7G     9%     252  3.5M    0%   /bootpool
/dev/md0              3.4M    3.4M   -260K   108%      37   985    4%   /var/run
devfs                 1.0K    1.0K      0B   100%       0     0  100%   /var/dhcpd/dev

                  why have /dev/md0 used 108%:

                  [2.5.1-RELEASE][root@edge.localdomain]/root: du -sch /var/run/*
  0B    /var/run/check_reload_status
4.0K    /var/run/cron.pid
4.0K    /var/run/devd.pid
  0B    /var/run/devd.pipe
  0B    /var/run/devd.seqpacket.pipe
  0B    /var/run/dmesg.boot
4.0K    /var/run/dpinger_WAN_PPPOE~83.221.235.65~193.98.112.4.pid
  0B    /var/run/dpinger_WAN_PPPOE~83.221.235.65~193.98.112.4.sock
4.0K    /var/run/expire_accounts.pid
 12K    /var/run/filter_reload_status
4.0K    /var/run/filterlog.pid
4.0K    /var/run/ld-elf.so.hints
4.0K    /var/run/ld-elf32.so.hints
  0B    /var/run/log
  0B    /var/run/logpriv
4.0K    /var/run/nginx-webConfigurator.pid
4.0K    /var/run/ntpd.pid
  0B    /var/run/pcscd.comm
4.0K    /var/run/pcscd.pid
4.0K    /var/run/pfSense_version
4.0K    /var/run/pfSense_version.rc
3.3M    /var/run/php-fpm.core
4.0K    /var/run/php-fpm.pid
  0B    /var/run/php-fpm.socket
4.0K    /var/run/ping_hosts.pid
4.0K    /var/run/pppoe_wan.pid
4.0K    /var/run/snmpd.pid
  0B    /var/run/snmpd.sock
4.0K    /var/run/sshd.pid
4.0K    /var/run/syslog.pid
4.0K    /var/run/unbound.pid
4.0K    /var/run/update_alias_url_data.pid
4.0K    /var/run/updaterrd.sh.pid
  0B    /var/run/utmp
4.0K    /var/run/utx.active
3.4M    total

                  I have on "/" 437 GB free with 917M inodes.

                  [2.5.1-RELEASE][root@edge.localdomain]/root: zpool list zroot
NAME    SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTROOT
zroot   452G   690M   451G        -         -     0%     0%  1.00x  ONLINE  -

[2.5.1-RELEASE][root@edge.localdomain]/root: smartctl -a /dev/ada0
smartctl 7.2 2020-12-30 r5155 [FreeBSD 11.3-STABLE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black Mobile
Device Model:     WDC WD5000LPLX-21ZNTT0
Serial Number:    WD-WX31A873XYT6
LU WWN Device Id: 5 0014ee 65d37823f
Firmware Version: 01.01A01
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jun 21 09:55:00 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 6900) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  81) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       5
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       1
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       993
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       5
192 Power-Off_Retract_Count 0x0032   114   114   000    Old_age   Always       -       64761
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       1860326
194 Temperature_Celsius     0x0022   106   097   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

                  What can I do please?

                  1 Reply Last reply Reply Quote 0
                  • M Offline
                    mer
                    last edited by

                    /dev/md0 is a memory device, not a real file system, so it's not peristent. If you look at your second, there is a corefile from php-fpm; that is why it's full.

                    The question is why is that crashing? There should be a clue in a log file somewhere.
                    But you could ssh in, remove the corefile and see if you can manually restart the web interface.

                    D 1 Reply Last reply Reply Quote 0
                    • D Offline
                      digidax @mer
                      last edited by

                      @mer
                      removing the core file and rebooting doesn't solve the problem. But I think, the upgrade process was not done for the kernel packages:

                      [2.5.1-RELEASE][root@edge.localdomain]/root: uname -a
FreeBSD edge.localdomain 11.3-STABLE FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun  2 17:53:37 EDT 2020     root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense  amd64
[2.5.1-RELEASE][root@edge.localdomain]/root: pkg info | grep -i kernel
bwi-firmware-kmod-3.130.20     Broadcom AirForce IEEE 802.11 Firmware Kernel Module
pfSense-kernel-pfSense-2.5.1   pfSense kernel (pfSense)

                      RELENG_2_4_5 != pfSense-kernel-pfSense-2.5.1

                      Am I right? But:

                      [2.5.1-RELEASE][root@edge.localdomain]/root: pkg-static version -vL=
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.

                      How can I force updateing the kernel?

                      1 Reply Last reply Reply Quote 0
                      • M Offline
                        mer
                        last edited by

                        It sounds like the upgrade did not complete.
                        Forcing it? Not sure.
                        If this is a Netgate device, the answer may be to open a ticket to get the correct image and reinstall.
                        If it's not a Netgate device, the answer may be to manually download the 2.5.1 image and reinstall.

                        Others may have a better answer.

                        D 1 Reply Last reply Reply Quote 0
                        • D Offline
                          digidax @mer
                          last edited by digidax

                          @mer It's a Intel ATOM Board with a SATA drive.

                          M 1 Reply Last reply Reply Quote 1
                          • M Offline
                            mer @digidax
                            last edited by

                            @digidax Ok, that rules out an offical image from Netgate support, so I agree with @jimp above, I think you're at the point of wipe, reinstall, rebuild with the latest 2.5.1 image.

                            D 1 Reply Last reply Reply Quote 1
                            • D Offline
                              digidax @mer
                              last edited by

                              @mer
                              Okay, will wait some days and then do so. Thanks a lot.

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.