Temperature Readings

comet424

oh ok... thats too bad.. and thats cool too... and when you say it might be an edge case what does that mean... did i pick a wrong cpu then? i picked it because its low power 35watts and cheapest asus board since doesnt need much ... maybe in 2.4.5 pfsense there be a fix...
thanks for helping so far and finding that info (:

comet424

maybe i should bought more expensive motherboard by asus guess its a guessing game lol

stephenw10

It looks to be a regular PCI device. The driver supports these:

https://github.com/freebsd/freebsd/blob/master/sys/dev/amdtemp/amdtemp.c#L79

So if you run pciconf -lv you may be able to see it. If it's not in that lists though it will not be supported.

ACPI should still work however.

In reality I'd be amazed if that CPU overheated so I wouldn't worry too much.

Steve

comet424

ya thats what i thought too i just figured cuz of the fan but once every 6 months blow off the cpu fan should be good.. i was hoping i could get a 15w version then no need a cpu cooler but you cant get those those be soldered on grr..
but ya i ran that command doesnt look like its in there.. unless its labled under different name

stephenw10

Mmm, nothing obvious there. Maybe it's disabled in the BIOS.

Steve

stephenw10

Ah, looks like you might need an extra driver for 17h CPUs. Try this:
kldload amdsmn

It should report a new bus. If you have amdtemp loaded alreadt it might also report the new device.

Steve

comet424

nothing worked or least it just says its installed i guess

stephenw10

Ah, Ok. Already loaded on an compatible device I guess.

Steve

comet424

ill look in the bios settings but if not no biggy
was hoping pfsense would also tell the cpu fan speed and chassis but i probably asking for too much in that department

autumnwalker

@stephenw10 said in Temperature Readings:

Ah, looks like you might need an extra driver for 17h CPUs. Try this:
kldload amdsmn

It should report a new bus. If you have amdtemp loaded alreadt it might also report the new device.

Steve

This got temps working for my 200GE. Thank you!

Is there anything I should do to make this permanent?

stephenw10

Create the file /boot/loader.conf.local (if it doesn't exist) then add to it the line:

amdsmn_load="YES"

Steve