Temperature Readings

comet424

oh pfsense is freebsd? i thought pfsense was pfsense and this freebsd was its own...

and does amd make sensor drivers for pfsense? thought only for windows.. hmm i can try looking on the bios if it pass's but never heard or knew that as all windows and using the asus suite or any program displays the cpu temperature...
i looked in the system logs but nothing about temperature i could find..

and if this freebsd is pfsense too how do you install this? its not part of the package manger... and i finally got that puppy working again today with lots of help

and is the AM4 how you know its a Zen cpu 17h whatever the 17h stands for...

comet424

i tried what you said like set to none boot up set to amd but no logs showing... all it shows is updating on the dash board...

stephenw10

The Athlon 200GE you linked to is a Zen microarchitecture CPU:
https://en.wikipedia.org/wiki/Zen_(microarchitecture)#Desktop_APUs

And checking what family that is:
https://en.wikipedia.org/wiki/List_of_AMD_CPU_microarchitectures

We can see it's 17h. Which should be supported by the driver already in FreeBSD 11.2 but somehow isn't.
It might be an edge case. There's not much we can do there.

Steve

comet424

oh ok... thats too bad.. and thats cool too... and when you say it might be an edge case what does that mean... did i pick a wrong cpu then? i picked it because its low power 35watts and cheapest asus board since doesnt need much ... maybe in 2.4.5 pfsense there be a fix...
thanks for helping so far and finding that info (:

comet424

maybe i should bought more expensive motherboard by asus guess its a guessing game lol

stephenw10

It looks to be a regular PCI device. The driver supports these:

https://github.com/freebsd/freebsd/blob/master/sys/dev/amdtemp/amdtemp.c#L79

So if you run pciconf -lv you may be able to see it. If it's not in that lists though it will not be supported.

ACPI should still work however.

In reality I'd be amazed if that CPU overheated so I wouldn't worry too much.

Steve

comet424

ya thats what i thought too i just figured cuz of the fan but once every 6 months blow off the cpu fan should be good.. i was hoping i could get a 15w version then no need a cpu cooler but you cant get those those be soldered on grr..
but ya i ran that command doesnt look like its in there.. unless its labled under different name

stephenw10

Mmm, nothing obvious there. Maybe it's disabled in the BIOS.

Steve

stephenw10

Ah, looks like you might need an extra driver for 17h CPUs. Try this:
kldload amdsmn

It should report a new bus. If you have amdtemp loaded alreadt it might also report the new device.

Steve

comet424

nothing worked or least it just says its installed i guess

stephenw10

Ah, Ok. Already loaded on an compatible device I guess.

Steve

comet424

ill look in the bios settings but if not no biggy
was hoping pfsense would also tell the cpu fan speed and chassis but i probably asking for too much in that department

autumnwalker

@stephenw10 said in Temperature Readings:

Ah, looks like you might need an extra driver for 17h CPUs. Try this:
kldload amdsmn

It should report a new bus. If you have amdtemp loaded alreadt it might also report the new device.

Steve

This got temps working for my 200GE. Thank you!

Is there anything I should do to make this permanent?

stephenw10

Create the file /boot/loader.conf.local (if it doesn't exist) then add to it the line:

amdsmn_load="YES"

Steve