Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    IPhone Tethering to pfSense

    Scheduled Pinned Locked Moved Hardware
    64 Posts 7 Posters 16.6k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      No. Neither does 2.4.4p3 which is the current version.

      It's not hard to get working though. Copy the kernel module if_ipheth.ko from a FreeBSD ISO, 11.2 to match pfSense 2.4.4, put it in /boot/modules
      Now add the line if_ipheth_load="YES" to the file /boot/loader.conf.local (create that file if necessary).
      That will load the driver at boot, alternatively you can load it immediately to test at the command line with kldload if_ipheth.
      According to this post you may need to chose a different usb config index for some models.

      I don't have a current iphone to test that with. Let us know how you get on.

      Steve

      1 Reply Last reply Reply Quote 1
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        For reference this issue is covered by this: https://redmine.pfsense.org/issues/7467

        1 Reply Last reply Reply Quote 0
        • RicoR
          Rico LAYER 8 Rebel Alliance
          last edited by

          Here you go: if_ipheth.zip

          -Rico

          1 Reply Last reply Reply Quote 1
          • E
            eiger3970
            last edited by

            Great 😄 Thanks stephenw10 and Rico.
            That zip file really saved me headaches downloading some iso file.

            Had some trouble copying the if_ipheth.ko file from local computer to pfSense...I had to use root rather than admin.
            Will test physical connection tomorrow, now that the software should be ready.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Just be aware that when pfSense 2.4.5 is released that kernel module will probably fail and require a module from 11-stable instead.
              If we can get those drivers included as modules that would not happen. I'm not entirely sure what the reasoning was for not including them, I do know it's been discussed before though. I have pinged our devs to see if we can do anything.

              Steve

              1 Reply Last reply Reply Quote 1
              • E
                eiger3970
                last edited by

                Thanks for the heads up.
                Should be where the future is moving, so would be avante garde to include now.
                Unless there's a conflict of interest with a networking business in control of the open source pfSense OS?

                1 Reply Last reply Reply Quote 0
                • E
                  eiger3970
                  last edited by

                  Not sure if a Proxmox or pfSense issue.
                  I allocated Proxmox's USB port to the pfSense VM ID.

                  pfSense dmesg and usbconfig don't show ue0?

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Do you see a new device detected at all when it's connected?

                    I would probably try to get this working on real hardware first but I guess you could tackle it either way.

                    Steve

                    1 Reply Last reply Reply Quote 1
                    • E
                      eiger3970
                      last edited by eiger3970

                      I have the USB connected to my local Linux Mint computer.
                      Moving hardware to the hypervisor is where the issue arises.
                      Hypervisor shell > $ lsusb > Enter > outputs the USB device.

                      root@proxmox:~# lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05ac:12a8 Apple, Inc. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

                      I allocated the USB ID 05ac:12a8 to the pfSense VM ID 145.
                      From there, I don't see much confirmation of pfSense connected to the USB?

                      [2.4.4-RELEASE][admin@pfSense.localdomain]/root: ifconfig
vtnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c00b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
	ether 42:63:7c:e4:6c:e3
	hwaddr 42:63:7c:e4:6c:e3
	inet6 fe80::4063:7cff:fee4:6ce3%vtnet0 prefixlen 64 scopeid 0x1 
	inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T <full-duplex>
	status: active
vtnet1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c00b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
	ether a6:2d:d5:4f:6c:f3
	hwaddr a6:2d:d5:4f:6c:f3
	inet6 fe80::a42d:d5ff:fe4f:6cf3%vtnet1 prefixlen 64 scopeid 0x2 
	inet 192.168.1.170 netmask 0xffffff00 broadcast 192.168.1.255 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T <full-duplex>
	status: active
enc0: flags=0<> metric 0 mtu 1536
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: enc 
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo 
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog 
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync 
	syncpeer: 224.0.0.240 maxupd: 128 defer: on
	syncok: 1

[2.4.4-RELEASE][admin@pfSense.localdomain]/root: usbconfig
ugen0.1: <Intel UHCI root HUB> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen0.2: <QEMU QEMU USB Tablet> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

                      According to https://forum.netgate.com/topic/95174/huawei-k5160-4g-usb-mobile-broadband/6 > post 6 > point 5 > I should see ue0, however I don't see this yet?

                      1 Reply Last reply Reply Quote 0
                      • E
                        eiger3970
                        last edited by

                        I believe this is not a pfSense issue.
                        I'm working on the hypervisor to pass the USB through.

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Yeah you should see it in usbconfig and dmesg after connecting it. You won't see it as an interface in ifconfig until a driver attaches to it.

                          Steve

                          1 Reply Last reply Reply Quote 1
                          • E
                            eiger3970
                            last edited by eiger3970

                            Ok, finally have the hypervisor working and passing the USB to the pfSense VM.
                            Not sure on the config for the pfSense VM to use a USB modem, so will try this link.

                            [2.4.4-RELEASE][admin@pfSense.localdomain]/boot: usbconfig
ugen1.1: <Intel UHCI root HUB> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen0.1: <Intel UHCI root HUB> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen3.1: <Intel UHCI root HUB> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen2.1: <Intel UHCI root HUB> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA)
ugen4.1: <Intel EHCI root HUB> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen0.2: <QEMU QEMU USB Tablet> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
ugen4.2: <Apple Inc. iPhone> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
[2.4.4-RELEASE][admin@pfSense.localdomain]/boot: ifconfig
vtnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c00b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
	ether 42:63:7c:e4:6c:e3
	hwaddr 42:63:7c:e4:6c:e3
	inet6 fe80::4063:7cff:fee4:6ce3%vtnet0 prefixlen 64 scopeid 0x1 
	inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T <full-duplex>
	status: active
vtnet1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c00b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE>
	ether a6:2d:d5:4f:6c:f3
	hwaddr a6:2d:d5:4f:6c:f3
	inet6 fe80::a42d:d5ff:fe4f:6cf3%vtnet1 prefixlen 64 scopeid 0x2 
	inet 192.168.1.170 netmask 0xffffff00 broadcast 192.168.1.255 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T <full-duplex>
	status: active
enc0: flags=0<> metric 0 mtu 1536
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: enc 
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo 
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog 
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync 
	syncpeer: 224.0.0.240 maxupd: 128 defer: on
	syncok: 1

                            Post 6, point 5, pfSense shows:
                            pfSense > Interfaces > Assign.
                            My pfSense 2.4.4 > Interfaces > Assignments > has no option to add OPT2. What do I need to do to add the USB?

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by stephenw10

                              If the phone is detected and you see a ue0 interface you should just be able to assign it and set it as dhcp.

                              Also: https://github.com/pfsense/pfsense/commit/41e09c2264bcc8067c349213eab5c0dadfb5681f ☺

                              1 Reply Last reply Reply Quote 1
                              • E
                                eiger3970
                                last edited by

                                pfSense 2.4.4 has the kernel module if_ipheth.ko:

                                [2.4.4-RELEASE][admin@pfSense.localdomain]/boot/modules: ls
bwi_v3_ucode.ko if_ipheth.ko    linker.hints

                                pfSense 2.4.4 /boot has the loader.conf file:

                                [2.4.4-RELEASE][admin@pfSense.localdomain]/boot: ls
beastie.4th        brand.4th          frames.4th         loader.efi         menu-commands.4th  userboot.so
boot               cdboot             gptboot            loader.help        menu.4th           version.4th
boot0              check-password.4th gptzfsboot         loader.rc          menu.rc            zfs
boot0sio           color.4th          isoboot            logo-beastie.4th   menusets.4th       zfsboot
boot1              defaults           kernel             logo-beastiebw.4th modules            zfsloader
boot1.efi          delay.4th          kernel.old         logo-fbsdbw.4th    pmbr
boot1.efifat       device.hints       loader             logo-orb.4th       pxeboot
boot2              dtb                loader.4th         logo-orbbw.4th     screen.4th
brand-fbsd.4th     entropy            loader.conf        logo-pfSensebw.4th shortcuts.4th
brand-pfSense.4th  firmware           loader.conf.origin mbr                support.4th

                                pfSense 2.4.4 has the loader.conf file edited:

                                kern.cam.boot_delay=10000
kern.ipc.nmbclusters="1000000"
kern.ipc.nmbjumbop="524288"
kern.ipc.nmbjumbo9="524288"
if_ipheth_load="YES"
autoboot_delay="3"
hw.usb.no_pf="1"

                                Not sure why I can't edit the pfSense GUI to add the USB modem now?
                                usbconfig shows ugen4.2, rather than ue0, but not sure why and if it's an issue?

                                1 Reply Last reply Reply Quote 0
                                • E
                                  eiger3970
                                  last edited by eiger3970

                                  Not sure what to do with the GitHub code?
                                  Think I'll file a bug report.

                                  1 Reply Last reply Reply Quote 0
                                  • E
                                    eiger3970
                                    last edited by

                                    I thought this Cellular Wireless guide might help.

                                    However, unable to type in the pfSense 2.4.4-RELEASE-p2 > Interfaces > PPPs > PPP Configuration > Link Interface(s): /dev/ugen4.2

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      I'm pretty sure ipheth does not provide any interfaces you could use with PPP. It will appear as a USB Ethernet device when it's working.

                                      You should put that loader line in loader.conf.local to avoid it being overwritten. Create that file since you don't have it yet.

                                      Try running kldstat to see that the module is loaded.

                                      Connect the phone then check the system log or dmesg to see what pfSense did.

                                      What phone are you connecting? ipgeth appears to have specific support for iphones 1-5:
                                      https://github.com/pfsense/FreeBSD-src/blob/RELENG_2_5/sys/dev/usb/net/if_ipheth.c#L136

                                      Though it also tries to match any Apple device with the correct interface class.

                                      Steve

                                      1 Reply Last reply Reply Quote 1
                                      • A
                                        akuma1x
                                        last edited by

                                        I know we're trying to get an iPhone tethered to pfsense and get it working, but why don't you try this?

                                        GL.iNet GL-AR750 Travel AC Router
                                        https://www.amazon.com/GL-iNet-GL-AR750-300Mbps-pre-Installed-Included/dp/B07712LKJM

                                        There are a few lower-spec'd models, since you don't need the wifi on this travel router box.

                                        That would provide an ethernet interface, and still use the iPhone to grab the internet connection from your cellular provider. It works pretty well, if you've got a good signal.

                                        Jeff

                                        1 Reply Last reply Reply Quote 0
                                        • E
                                          eiger3970
                                          last edited by eiger3970

                                          Thanks @stephenw10,
                                          The kernel module is running:

                                          [2.4.4-RELEASE][admin@pfSense.localdomain]/.ssh: kldstat
Id Refs Address            Size     Name
 1    8 0xffffffff80200000 2d9a7d0  kernel
 2    1 0xffffffff82f9c000 4318     if_ipheth.ko
 3    1 0xffffffff83019000 10a0     cpuctl.ko

                                          dmesg shows pfSense has found the iPhone (18th line from the bottom):

                                          [2.4.4-RELEASE][admin@pfSense.localdomain]/.ssh: dmesg:
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p6 #3 518496b29ae(RELENG_2_4_4): Wed Dec 12 07:41:44 EST 2018
    root@buildbot2.nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): text 80x25
CPU: Common KVM processor (3092.92-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf61  Family=0xf  Model=0x6  Stepping=1
  Features=0x783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
  Features2=0x80202001<SSE3,CX16,x2APIC,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 1073741824 (1024 MB)
avail memory = 981479424 (936 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <BOCHS  BXPCAPIC>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1546458305 Hz quality 800
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe120-0xe12f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xe040-0xe05f irq 11 at device 1.2 on pci0
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xfa000000-0xfbffffff,0xfea90000-0xfea90fff at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI Balloon adapter> port 0xe060-0xe07f mem 0xfc000000-0xfc7fffff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Block adapter> port 0xe000-0xe03f mem 0xfea91000-0xfea91fff,0xfc800000-0xfcffffff irq 10 at device 10.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
vtblk0: 8192MB (16777216 512 byte sectors)
virtio_pci2: <VirtIO PCI Network adapter> port 0xe080-0xe09f mem 0xfea92000-0xfea92fff,0xfd000000-0xfd7fffff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci2
vtnet0: Ethernet address: 42:63:7c:e4:6c:e3
000.000971 [ 421] vtnet_netmap_attach       max rings 1
vtnet0: netmap queues/slots: TX 1/1024, RX 1/1024
000.000972 [ 426] vtnet_netmap_attach       virtio attached txq=1, txd=1024 rxq=1, rxd=1024
virtio_pci3: <VirtIO PCI Network adapter> port 0xe0a0-0xe0bf mem 0xfea93000-0xfea93fff,0xfd800000-0xfdffffff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci3
vtnet1: Ethernet address: a6:2d:d5:4f:6c:f3
000.000973 [ 421] vtnet_netmap_attach       max rings 1
vtnet1: netmap queues/slots: TX 1/1024, RX 1/1024
000.000974 [ 426] vtnet_netmap_attach       virtio attached txq=1, txd=1024 rxq=1, rxd=1024
uhci1: <Intel 82801I (ICH9) USB controller> port 0xe0c0-0xe0df irq 10 at device 29.0 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xe0e0-0xe0ff irq 10 at device 29.1 on pci0
usbus2 on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 11 at device 29.2 on pci0
usbus3 on uhci3
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea94000-0xfea94fff irq 11 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea95000-0xfea950ff irq 10 at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xfea96000-0xfea960ff irq 11 at device 31.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae13 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xed000-0xeffff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ugen0.2: <QEMU QEMU USB Tablet> at usbus0
uhid0 on uhub1
uhid0: <QEMU QEMU USB Tablet, class 0/0, rev 2.00/0.00, addr 2> on usbus0
uhub4: 6 ports with 6 removable, self powered
ugen4.2: <Apple Inc. iPhone> at usbus4
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 655MB (335744 2048 byte sectors)
Trying to mount root from ufs:/dev/ufsid/5c46b3cebae05a43 [rw]...
random: unblocking device.
CPU: Common KVM processor (3092.92-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf61  Family=0xf  Model=0x6  Stepping=1
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x80202001<SSE3,CX16,x2APIC,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
Hypervisor: Origin = "KVMKVMKVM"
vtnet0: link state changed to UP
vtnet1: link state changed to UP
pflog0: promiscuous mode enabled

                                          I'm using an old iPhone 5C, works fine on other OSes with USB hotspot.
                                          I suspect it's the VM or FreeBSD factor.
                                          I think I solved the VM factor by passing the USB through the hypervisor correctly.

                                          @akuma1x Thanks, however:

                                          1. that would be a failure.
                                          2. bit like 'just reboot the computer'. I prefer to find and solve the issue at hand, for future reference.
                                          3. I'm trying to make the network as efficient as possible.
                                          4. The fewer hardware devices:
                                            4.1 the less points of failure
                                            4.2 the less power costs
                                            4.3 possibly less network bottlenecks
                                            4.3.1 possibly less speed delays
                                          5. reduces fiscal expense
                                          6. cleaner network topology map
                                          7. less unnecessary products
                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Ok check: usbconfig -d ugen4.2 dump_all_desc

                                            1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.