NUT package (2.8.0 and below)

shaffergr

unfortunately, the system keeps thinking that my reply is spam and won't let me post it.

went through the instructions.

usbconfig -v gives the same before and after. UPS is attached to ugen0.2 and identified correctly - "CPS OR500LCDRM1Ua".

[23.01-RELEASE][X@Y]/var/log: cat *.log | egrep -ie usb | more

shows no errors or info that already reported in my original post.

[23.01-RELEASE][X@Y]/var/log: usbconfig -v

ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.1.0: uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>

ugen0.2: <CPS OR500LCDRM1Ua> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA)

dennypage

@shaffergr said in NUT package:

[23.01-RELEASE][X@Y]/var/log: cat *.log | egrep -ie usb | more
shows no errors or info that already reported in my original post.

Thanks. Your original post contained the crucial information, which is that usbhid-ups is exiting with a bus error.

I'm assuming that the others will also see this in their logs.

Are you a C coder by chance? I don't have a CPS.

dennypage

@azdeltawye said in NUT package:

I am experiencing the same issue with my Tripp Lite rack mount UPS; NUT not able to connect after upgrading pfSense to 23.01.

Is it the same issue? It works for several minutes and then fails? Or is the issue you are seeing that it never works?

If the former, please check your logs for usbhid-ups messages and post them.

If the latter, have you unplugged and replugged since updating? Alternatively a second reboot would work as well.

shaffergr

@dennypage

Its been a long time since I coded anything so most likely no help.

nut/usb package worked flawlessly under 22.05 so wonder what changed...

Can I turn the log level up to debug to gather more info?

JonathanLee

@dennypage

(Image: Same issue)

(Image: Same issue)

Feb 17 13:56:23 Lee_Family kernel: pid 53495 (usbhid-ups), jid 0, uid 66: exited on signal 11

Feb 17 09:20:53 Lee_Family kernel: pid 85785 (usbhid-ups), jid 0, uid 66: exited on signal 11

shaffergr

@jonathanlee

I am only seeing exit signal 10, not signal 11 so interesting..

JonathanLee

@shaffergr I am running an ARM processor for this one

JonathanLee

@azdeltawye
Run this command in the GUI

cat /var/log/*.log

After search with ctl-f usbhid-ups this should make it easy so you do not need to log in with a console cable or ssh in, and still get the log entry everyone is looking for.

Quick and easy way to find it, my grep | was not working in the command area.

shaffergr

@jonathanlee

My Bo’s is a Netgate XG-7100. Intel Atom processor so amd64

shaffergr

@shaffergr

Box, not Bo’s

dennypage

@shaffergr said in NUT package:

I am only seeing exit signal 10, not signal 11 so interesting.

Different sides of the same random pointer coin. One is accessing memory that doesn't exist, the other is accessing memory that exists but doing so improperly.

JonathanLee

@shaffergr mine is a Netgate SG-2100 Max

tman222

Fingers crossed, I may have found a workaround. My CyberPower UPS has now been continuously connected for a little over 1.5 hours.

After a lot of searching, I came across this link:

https://github.com/networkupstools/nut/wiki/Troubleshooting-eventual-disconnections-(Data-stale)

I ended up setting/adjusting the following variables:
pollinterval=15 in the section for ups.conf
MAXAGE 25 in the section for upsd.conf
DEADTIME 25 in the section for upsmon.conf

Will continue to monitor - hopefully it will to stay connected.

tman222

@tman222 said in NUT package:

Fingers crossed, I may have found a workaround. My CyberPower UPS has now been continuously connected for a little over 1.5 hours.

After a lot of searching, I came across this link:

https://github.com/networkupstools/nut/wiki/Troubleshooting-eventual-disconnections-(Data-stale)

I ended up setting/adjusting the following variables:
pollinterval=15 in the section for ups.conf
MAXAGE 25 in the section for upsd.conf
DEADTIME 25 in the section for upsmon.conf

Will continue to monitor - hopefully it will to stay connected.

Well, I spoke too soon - shortly after posting this the connection was lost again with the same signal 10 kernel error shown in the logs that has already been referenced above.

Would another temporary workaround be just to set up a cron job to restart nut every e.g. 15min until a more permanent solution is found?

azdeltawye

@jonathanlee

My problem looks a bit different.

JonathanLee

@dennypage I removed the package for now, it is generating tons of logs that I can't see anything else in the GUI logs. It seems to be consuming more resources than normal also with the pointer issues. Will reinstall once we have a solid resolve for this issue.

JonathanLee

@azdeltawye is that the only entry ?

azdeltawye

@dennypage

I guess my symptoms are different in that it never works at all. Yes, I have unplugged and rebooted several times without any improvement.

I did run the 'usbconfig -v' command and it appears normal?:

ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.1.0: uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0300
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0003
  bMaxPacketSize0 = 0x0009
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Intel>
  iProduct = 0x0002  <XHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x001f
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0040
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0009  <HUB>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0002
        bInterval = 0x00ff
        bRefresh = 0x0000
        bSynchAddress = 0x0000

      Additional Descriptor

      bLength = 0x06
      bDescriptorType = 0x30
      bDescriptorSubType = 0x00
       RAW dump:
       0x00 | 0x06, 0x30, 0x00, 0x00, 0x00, 0x00




ugen0.2: <Tripp Lite TRIPP LITE SMART1500RMXLN> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (0mA)
ugen0.2.0: uhid0: <Tripp Lite TRIPP LITE SMART1500RMXLN, class 0/0, rev 1.10/2.0a, addr 29>

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0110
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0008
  idVendor = 0x09ae
  idProduct = 0x3015
  bcdDevice = 0x020a
  iManufacturer = 0x0002  <Tripp Lite >
  iProduct = 0x0003  <TRIPP LITE SMART1500RMXLN >
  iSerialNumber = 0x0004  <2517AY0SM882400090>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0022
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x00e0
    bMaxPower = 0x0000

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0001
      bInterfaceClass = 0x0003  <HID device>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0000  <no string>

      Additional Descriptor

      bLength = 0x09
      bDescriptorType = 0x21
      bDescriptorSubType = 0x10
       RAW dump:
       0x00 | 0x09, 0x21, 0x10, 0x01, 0x00, 0x01, 0x22, 0xe4,
       0x08 | 0x04

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008
        bInterval = 0x0028
        bRefresh = 0x0000
        bSynchAddress = 0x0000

azdeltawye

@jonathanlee said in NUT package:

@azdeltawye is that the only entry ?

It seems to repeat that sequence over and over.

dennypage

@azdeltawye Need the usbhid-ups and kernel usb messages as above.