Traffic shaping with Chelsio T520-SO-CR
-
I've setup pfsense 2.3.2 on a Dell PowerEdge R220 with a Chelsio T520-SO-CR 10Gb nic configured with the following interfaces:
WAN (wan) -> cxl1 -> v4: xxx.xxx.xxx.xxx/28
VLAN1 (lan) -> cxl0_vlan1 -> v4: 192.168.1.1/24
VLAN5 (opt1) -> cxl0_vlan5 -> v4: 192.168.5.1/24
VLAN10 (opt2) -> cxl0_vlan10 -> v4: 192.168.10.1/24
VLAN14 (opt3) -> cxl0_vlan14 -> v4: 192.168.14.1/24All working fine except that the Traffic Shaping wizard can't seem to see the WAN interface: the dropdown only lists the vlan interfaces. I'm aware that the nic driver must be compatible with ALTQ for shaping to work and as I understand it, this nic is using the cxgbe driver which is listed as supported on the ALTQ manpage, but I don't know how to verify for certain that this is the driver actually being used.
How can I troubleshoot what is causing this issue, whether it's driver related or something else?
Many thanks,
Joe. -
Is there anyone else with this nic able to use traffic shaping?
-
Have you tried manually creating the ALTQ queues?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy