PFSense 2.3.2 - WAN is working, Lan no Internet access but able to PING

[olivermv]

It's been few days now, figuring out what seems to be the issue in my Setup.
Issue:
Unable to Browser on LAN Side, but able to ping any Public IP.

Network Structure:

SKYModem -> PFSense                                   ->                   Laptop
(111.x.x.169)         (111.x.x.172)|(10.x.100.11/24) (10.x.100.20/24|10.x.100.11)

• PFSense, able to ping any public IP
• Laptop, able to ping any public IP
• PFSense DNS uses SKY DNS
• Laptop DNS uses PFSense IP

Any Ideas?
Appreciates your help.

[Lucky06480]

I had a similar problem, described and resolved here :
https://forum.pfsense.org/index.php?topic=119077.0

May be same solution can help ?

Best regards,
Luc

[Derelict]

Can pfSense ping in Diagnostics > Ping to 8.8.8.8 if you set the source address to LAN there??

Can pfSense resolve names in Diagnostics > DNS Lookup ?

What are the DNS servers configured on the clients that cannot browse?

You have a lot of superfluous rules on LAN but nothing that should keep it from working. I would delete all but the bottom two and set the source network to LAN net on the IPv4 rule for consistency.

[olivermv]

@Lucky06480:

I had a similar problem, described and resolved here :
https://forum.pfsense.org/index.php?topic=119077.0

May be same solution can help ?

Best regards,
Luc

Thanks Lucky06480 it worked.
Thanks alot!
Cheers!

[yesir]

This post is deleted!