System halted and then nothing (crash dump supplied)



  • Really do not have much to say here.  Unit was configured was running good in production.  Added a final CARP applied and then the browser just spun.  Brought up the console and it just sat there with no keyboard inputs working.  Rebooted the unit a number of times and each time is progressed less and less.  Finally it wouldn't get past the booting.  powered it off and on, pressed the reset button down for a while till the LEDs turned off and the unit reset as expected.

    Logged into the console and this is what the crash dump gave:

    					Crash report begins.  Anonymous machine information:
    
    amd64
    10.3-RELEASE-p5
    FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016     root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense
    
    Crash report details:
    
    Filename: /var/crash/bounds
    1
    
    Filename: /var/crash/info.0
    
    Filename: /var/crash/info.last
    ��.��..��minfree��bounds���info.0���textdump.tar.0���
    	info.last
    ���
    textdump.tar.last�5
    Filename: /var/crash/minfree
    2048
    
    Filename: /var/crash/textdump.tar.0
    
    Filename: /var/crash/textdump.tar.last
    ��.��..��minfree��bounds���info.0���textdump.tar.0���
    	info.last
    ���
    textdump.tar.last�5				
    

    Any thoughts??

    Thanks!!


  • Rebel Alliance Developer Netgate

    That wasn't the full crash dump, it didn't have any of the information from inside the textdump archive.