[SOLVED] APU.2C4 mit Huawei ME909s120
-
Schon mal das hier versucht?
https://forum.pfsense.org/index.php?topic=77270.msg426566#msg426566
Hatte bei mir damals geholfen. -
So, es hat mir doch keine Ruhe gelassen und ich habe die halbe Nacht noch etwas getüfftelt.
Inzwischen bekomme ich zumindest schon einmal eine IP Adresse zugewiesen, Im Dashboard > Gateways wird 4G_WAN zumindest als offline angezeigt.
hier die Konfiguration und dem dazugehörigen Syslog System und ppp
Link Interface /dev/cuau0.0
init string AT&F
Was mir aufgefallen ist das sich die ganzen Device Einstellungen und Veränderungen nach einem Neustart der FW bemerkbar machen. D.H. Änderung vor nehmen, neustarten und hoffen.
Syslog System
Dec 30 10:59:21 php-fpm 51284 /interfaces_ppps_edit.php: Starting 3gstats.php on device 'cuaU0.4' for interface 'opt2' Dec 30 10:59:20 php-fpm 59231 /rc.start_packages: Restarting/Starting all packages. Dec 30 10:59:20 check_reload_status Reloading filter Dec 30 10:59:20 check_reload_status Restarting OpenVPN tunnels/interfaces Dec 30 10:59:20 check_reload_status Restarting ipsec tunnels Dec 30 10:59:20 check_reload_status updating dyndns 4G_WAN_PPP Dec 30 10:59:19 check_reload_status Starting packages Dec 30 10:59:19 php-fpm 51761 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.183.204.22 -> 10.53.79.7 - Restarting packages. Dec 30 10:59:17 php-fpm 51761 /rc.newwanip: Creating rrd update script Dec 30 10:59:17 php-fpm 51761 /rc.newwanip: Resyncing OpenVPN instances for interface 4G_WAN. Dec 30 10:59:16 xinetd 20884 Reconfigured: new=0 old=1 dropped=0 (services) Dec 30 10:59:16 xinetd 20884 readjusting service 6969-udp Dec 30 10:59:16 xinetd 20884 Swapping defaults Dec 30 10:59:16 xinetd 20884 Starting reconfiguration Dec 30 10:59:16 php-fpm 51761 /rc.newwanip: IP has changed, killing states on former IP 10.183.204.22. Dec 30 10:59:16 php-fpm 51761 /rc.newwanip: rc.newwanip: on (IP address: 10.53.79.7) (interface: 4G_WAN[opt2]) (real interface: ppp0). Dec 30 10:59:16 php-fpm 51761 /rc.newwanip: rc.newwanip: Info: starting on ppp0. Dec 30 10:59:15 ppp [opt2] IFACE: Rename interface ng0 to ppp0 Dec 30 10:59:15 ppp [opt2] IFACE: Up event Dec 30 10:59:15 check_reload_status rc.newwanip starting ppp0 Dec 30 10:59:14 check_reload_status Rewriting resolv.conf Dec 30 10:59:14 ppp [opt2] 10.53.79.7 -> 10.64.64.0 Dec 30 10:59:14 ppp [opt2] IPCP: LayerUp Dec 30 10:59:14 ppp [opt2] IPCP: state change Ack-Sent --> Opened Dec 30 10:59:14 ppp [opt2] SECDNS 193.189.244.206 Dec 30 10:59:14 ppp [opt2] PRIDNS 193.189.244.225 Dec 30 10:59:14 ppp [opt2] IPADDR 10.53.79.7 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Ack #4 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] SECDNS 193.189.244.206 Dec 30 10:59:14 ppp [opt2] PRIDNS 193.189.244.225 Dec 30 10:59:14 ppp [opt2] IPADDR 10.53.79.7 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #4 Dec 30 10:59:14 ppp [opt2] SECDNS 193.189.244.206 Dec 30 10:59:14 ppp [opt2] PRIDNS 193.189.244.225 Dec 30 10:59:14 ppp [opt2] 10.53.79.7 is OK Dec 30 10:59:14 ppp [opt2] IPADDR 10.53.79.7 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Nak #3 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] SECDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] PRIDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPADDR 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #3 Dec 30 10:59:14 ppp [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Reject #2 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] IPV6CP: LayerFinish Dec 30 10:59:14 ppp [opt2] IPV6CP: state change Req-Sent --> Stopped Dec 30 10:59:14 ppp [opt2] IPV6CP: protocol was rejected by peer Dec 30 10:59:14 ppp [opt2_link0] LCP: protocol IPV6CP was rejected Dec 30 10:59:14 ppp [opt2_link0] LCP: rec'd Protocol Reject #2 (Opened) Dec 30 10:59:14 ppp [opt2] SECDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] PRIDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Dec 30 10:59:14 ppp [opt2] IPADDR 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #2 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Nak #1 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] IPCP: state change Req-Sent --> Ack-Sent Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigAck #1 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Request #1 (Req-Sent) Dec 30 10:59:14 ppp [opt2] IPV6CP: SendConfigReq #1 Dec 30 10:59:14 ppp [opt2] IPV6CP: state change Starting --> Req-Sent Dec 30 10:59:14 ppp [opt2] IPV6CP: Up event Dec 30 10:59:14 ppp [opt2] SECDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] PRIDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Dec 30 10:59:14 ppp [opt2] IPADDR 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #1 Dec 30 10:59:14 ppp [opt2] IPCP: state change Starting --> Req-Sent Dec 30 10:59:14 ppp [opt2] IPCP: Up event Dec 30 10:59:14 ppp [opt2] IPV6CP: LayerStart Dec 30 10:59:14 ppp [opt2] IPV6CP: state change Initial --> Starting Dec 30 10:59:14 ppp [opt2] IPV6CP: Open event Dec 30 10:59:14 ppp [opt2] IPCP: LayerStart Dec 30 10:59:14 ppp [opt2] IPCP: state change Initial --> Starting Dec 30 10:59:14 ppp [opt2] IPCP: Open event Dec 30 10:59:14 ppp [opt2] Bundle: Status update: up 1 link, total bandwidth 150000000 bps Dec 30 10:59:14 ppp [opt2_link0] Link: Join bundle "opt2" Dec 30 10:59:14 ppp [opt2_link0] Link: Matched action 'bundle "opt2" ""' Dec 30 10:59:14 ppp [opt2_link0] LCP: authorization successful Dec 30 10:59:14 ppp [opt2_link0] MESG: Welcome!! Dec 30 10:59:14 ppp [opt2_link0] CHAP: rec'd SUCCESS #1 len: 13 Dec 30 10:59:14 ppp [opt2_link0] CHAP: sending RESPONSE #1 len: 25 Dec 30 10:59:14 ppp [opt2_link0] CHAP: Using authname "user" Dec 30 10:59:14 ppp [opt2_link0] Name: "HUAWEI_CHAP_SRVR" Dec 30 10:59:14 ppp [opt2_link0] CHAP: rec'd CHALLENGE #1 len: 37 Dec 30 10:59:14 ppp [opt2_link0] LCP: LayerUp Dec 30 10:59:14 ppp [opt2_link0] LCP: auth: peer wants CHAP, I want nothing Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Ack-Sent --> Opened Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x493cad2a Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x000a0000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: rec'd Configure Ack #1 (Ack-Sent) Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Req-Sent --> Ack-Sent Dec 30 10:59:14 ppp [opt2_link0] AUTHPROTO CHAP MD5 Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x00000543 Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x00000000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: SendConfigAck #1 Dec 30 10:59:14 ppp [opt2_link0] AUTHPROTO CHAP MD5 Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x00000543 Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x00000000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: rec'd Configure Request #1 (Req-Sent) Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x493cad2a Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x000a0000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: SendConfigReq #1 Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Starting --> Req-Sent Dec 30 10:59:14 ppp [opt2_link0] LCP: Up event Dec 30 10:59:14 ppp [opt2_link0] Link: UP event Dec 30 10:59:14 ppp [opt2_link0] MODEM: chat script succeeded Dec 30 10:59:14 ppp [opt2_link0] CHAT: Connected at 150000000. Dec 30 10:59:14 ppp [opt2_link0] CHAT: ATDT*99# Dec 30 10:59:14 ppp [opt2_link0] CHAT: Dialing server at *99#... Dec 30 10:59:14 ppp [opt2_link0] CHAT: Detected Custom modem. Dec 30 10:59:14 ppp [opt2_link0] LCP: LayerStart Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Initial --> Starting Dec 30 10:59:14 ppp [opt2_link0] LCP: Open eventppp
Dec 30 10:59:15 ppp [opt2] IFACE: Rename interface ng0 to ppp0 Dec 30 10:59:15 ppp [opt2] IFACE: Up event Dec 30 10:59:14 ppp [opt2] 10.53.79.7 -> 10.64.64.0 Dec 30 10:59:14 ppp [opt2] IPCP: LayerUp Dec 30 10:59:14 ppp [opt2] IPCP: state change Ack-Sent --> Opened Dec 30 10:59:14 ppp [opt2] SECDNS 193.189.244.206 Dec 30 10:59:14 ppp [opt2] PRIDNS 193.189.244.225 Dec 30 10:59:14 ppp [opt2] IPADDR 10.53.79.7 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Ack #4 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] SECDNS 193.189.244.206 Dec 30 10:59:14 ppp [opt2] PRIDNS 193.189.244.225 Dec 30 10:59:14 ppp [opt2] IPADDR 10.53.79.7 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #4 Dec 30 10:59:14 ppp [opt2] SECDNS 193.189.244.206 Dec 30 10:59:14 ppp [opt2] PRIDNS 193.189.244.225 Dec 30 10:59:14 ppp [opt2] 10.53.79.7 is OK Dec 30 10:59:14 ppp [opt2] IPADDR 10.53.79.7 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Nak #3 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] SECDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] PRIDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPADDR 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #3 Dec 30 10:59:14 ppp [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Reject #2 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] IPV6CP: LayerFinish Dec 30 10:59:14 ppp [opt2] IPV6CP: state change Req-Sent --> Stopped Dec 30 10:59:14 ppp [opt2] IPV6CP: protocol was rejected by peer Dec 30 10:59:14 ppp [opt2_link0] LCP: protocol IPV6CP was rejected Dec 30 10:59:14 ppp [opt2_link0] LCP: rec'd Protocol Reject #2 (Opened) Dec 30 10:59:14 ppp [opt2] SECDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] PRIDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Dec 30 10:59:14 ppp [opt2] IPADDR 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #2 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Nak #1 (Ack-Sent) Dec 30 10:59:14 ppp [opt2] IPCP: state change Req-Sent --> Ack-Sent Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigAck #1 Dec 30 10:59:14 ppp [opt2] IPCP: rec'd Configure Request #1 (Req-Sent) Dec 30 10:59:14 ppp [opt2] IPV6CP: SendConfigReq #1 Dec 30 10:59:14 ppp [opt2] IPV6CP: state change Starting --> Req-Sent Dec 30 10:59:14 ppp [opt2] IPV6CP: Up event Dec 30 10:59:14 ppp [opt2] SECDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] PRIDNS 0.0.0.0 Dec 30 10:59:14 ppp [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Dec 30 10:59:14 ppp [opt2] IPADDR 0.0.0.0 Dec 30 10:59:14 ppp [opt2] IPCP: SendConfigReq #1 Dec 30 10:59:14 ppp [opt2] IPCP: state change Starting --> Req-Sent Dec 30 10:59:14 ppp [opt2] IPCP: Up event Dec 30 10:59:14 ppp [opt2] IPV6CP: LayerStart Dec 30 10:59:14 ppp [opt2] IPV6CP: state change Initial --> Starting Dec 30 10:59:14 ppp [opt2] IPV6CP: Open event Dec 30 10:59:14 ppp [opt2] IPCP: LayerStart Dec 30 10:59:14 ppp [opt2] IPCP: state change Initial --> Starting Dec 30 10:59:14 ppp [opt2] IPCP: Open event Dec 30 10:59:14 ppp [opt2] Bundle: Status update: up 1 link, total bandwidth 150000000 bps Dec 30 10:59:14 ppp [opt2_link0] Link: Join bundle "opt2" Dec 30 10:59:14 ppp [opt2_link0] Link: Matched action 'bundle "opt2" ""' Dec 30 10:59:14 ppp [opt2_link0] LCP: authorization successful Dec 30 10:59:14 ppp [opt2_link0] MESG: Welcome!! Dec 30 10:59:14 ppp [opt2_link0] CHAP: rec'd SUCCESS #1 len: 13 Dec 30 10:59:14 ppp [opt2_link0] CHAP: sending RESPONSE #1 len: 25 Dec 30 10:59:14 ppp [opt2_link0] CHAP: Using authname "user" Dec 30 10:59:14 ppp [opt2_link0] Name: "HUAWEI_CHAP_SRVR" Dec 30 10:59:14 ppp [opt2_link0] CHAP: rec'd CHALLENGE #1 len: 37 Dec 30 10:59:14 ppp [opt2_link0] LCP: LayerUp Dec 30 10:59:14 ppp [opt2_link0] LCP: auth: peer wants CHAP, I want nothing Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Ack-Sent --> Opened Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x493cad2a Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x000a0000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: rec'd Configure Ack #1 (Ack-Sent) Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Req-Sent --> Ack-Sent Dec 30 10:59:14 ppp [opt2_link0] AUTHPROTO CHAP MD5 Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x00000543 Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x00000000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: SendConfigAck #1 Dec 30 10:59:14 ppp [opt2_link0] AUTHPROTO CHAP MD5 Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x00000543 Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x00000000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: rec'd Configure Request #1 (Req-Sent) Dec 30 10:59:14 ppp [opt2_link0] MAGICNUM 0x493cad2a Dec 30 10:59:14 ppp [opt2_link0] MRU 1500 Dec 30 10:59:14 ppp [opt2_link0] ACCMAP 0x000a0000 Dec 30 10:59:14 ppp [opt2_link0] PROTOCOMP Dec 30 10:59:14 ppp [opt2_link0] ACFCOMP Dec 30 10:59:14 ppp [opt2_link0] LCP: SendConfigReq #1 Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Starting --> Req-Sent Dec 30 10:59:14 ppp [opt2_link0] LCP: Up event Dec 30 10:59:14 ppp [opt2_link0] Link: UP event Dec 30 10:59:14 ppp [opt2_link0] MODEM: chat script succeeded Dec 30 10:59:14 ppp [opt2_link0] CHAT: Connected at 150000000. Dec 30 10:59:14 ppp [opt2_link0] CHAT: ATDT*99# Dec 30 10:59:14 ppp [opt2_link0] CHAT: Dialing server at *99#... Dec 30 10:59:14 ppp [opt2_link0] CHAT: Detected Custom modem. Dec 30 10:59:14 ppp [opt2_link0] LCP: LayerStart Dec 30 10:59:14 ppp [opt2_link0] LCP: state change Initial --> Starting Dec 30 10:59:14 ppp [opt2_link0] LCP: Open event Dec 30 10:59:14 ppp [opt2_link0] Link: OPEN event Dec 30 10:59:14 ppp [opt2] Bundle: Interface ng0 createdAlso für mich sieht das erstal so aus als ob alles ok sei, einen ping bekomme ich jedoch nicht über das 4G_WAN raus.
@flix87
Danke schön, aber das hilft mir nicht wirklich weiter :) -
Huhu Gemeinde,
die bastelei geht weiter. Da offensichtlich ist hier sehr wenig Erfahrung über das ganze mobile Internet, was bleibt einem anderes übrig zu recherchieren was das Zeug hält und mit einer Engel Geduld testen.
Dann mal zu dem Aktuellen Stand…..
Zwischenzeitlich habe ich ein pdf Dokument zu meinem miniPCIe Modul gefunden, in diesem wird die init string Kommunikation erklärt. Also nix mit einfach string kopieren :(
Dieses Dokument werde ich erst einmal abarbeiten und im Anschluß vermutlich ausführlich Auskunft geben können was welcher Befehl bedeutet. Einfach ist anders!Eine Dokumentation zur miniPCIe Huawei ME909s-120 gibt es hier : http://consumer.huawei.com/en/solutions/m2m-solutions/products/support/user-guides/me909s_120_minipcie_en.htm
Mitlerweile habe ich auch raus bekommen wie ich über die Console die AT Befehle testen kann ohne die pfsense andauernd neu zu starten.
Mit dem Befehl
cu -l /dev/cuaU0.0
lade ich eine Konsole in der ich die AT Befehle eingeben kann und sofort einen Antwort bekomme.
Jetzt gilt zu heraus zu bekommen welcher Befehl was bedeutet und was wird auf der Gegenstelle erwartet.
Eine IP und Verbindung bekomme ich mitlerweile aufgebaut, der Ping geht auch über diese Verbindung von der pfSense raus. Das Gateway wird allerdings als Offline erkannt und auch so behandelt. Offensichtlich fehlen da noch ein paar Befehle in der init string.
Die Suche geht weiter…....
-
Neue Erkenntnisse ;D
Mit den AT Befehlen stellt man das Modem ein damit es weiß was es zu tun hat…....
Weiß zufällig jemand welche Befhle benötigt werden um sich beim Provider anzumelden, also die Ablaufsstruktur des Init Strings.
Mit AT&F rufe ich nur das default Profil im Modem auf. Damit bekomme ich allerdings nur eine "halbe" Anmeldung.
Stay tuned
PS: wenn ich raus habe gibts ein HowTo ;)
-
Update!
4G_WAN ist online, allerdings wird das Gateway als offline aufgeführt in auf dem Dashboard.
Ping von der pfSense gehen sauber raus und auch die Rechner können über Gateway 4G_WAN auf das Internet zugreifen.Möglich gemacht habe ich es wie folgt.
Als init string wurde folgendes eingegeben
(AT)&F&C1E1S0=0
&F läd die akteulle Konfiguration von dem Modem Modul, bei mir auf Werksteinstellung zurück gesetzt.
&C1 fragt die Verbindung zur Gegenstelle ab und gibt den Wert online ggf raus (in meinem Fall wird das signal aber nicht richtig aufgefasst.)
E1 schaltet den Echo Mode an
S0=0 schaltet den Lautsprecher aus
Hier der Auszug aus dem Syslog PPP
Jan 5 11:39:29 ppp [opt6] IFACE: Rename interface ng0 to ppp0 Jan 5 11:39:29 ppp [opt6] IFACE: Up event Jan 5 11:39:28 ppp [opt6] 10.148.221.143 -> 10.64.64.0 Jan 5 11:39:28 ppp [opt6] IPCP: LayerUp Jan 5 11:39:28 ppp [opt6] IPCP: state change Ack-Sent --> Opened Jan 5 11:39:28 ppp [opt6] SECDNS 193.189.244.206 Jan 5 11:39:28 ppp [opt6] PRIDNS 193.189.244.225 Jan 5 11:39:28 ppp [opt6] IPADDR 10.148.221.143 Jan 5 11:39:28 ppp [opt6] IPCP: rec'd Configure Ack #4 (Ack-Sent) Jan 5 11:39:28 ppp [opt6] SECDNS 193.189.244.206 Jan 5 11:39:28 ppp [opt6] PRIDNS 193.189.244.225 Jan 5 11:39:28 ppp [opt6] IPADDR 10.148.221.143 Jan 5 11:39:28 ppp [opt6] IPCP: SendConfigReq #4 Jan 5 11:39:28 ppp [opt6] SECDNS 193.189.244.206 Jan 5 11:39:28 ppp [opt6] PRIDNS 193.189.244.225 Jan 5 11:39:28 ppp [opt6] 10.148.221.143 is OK Jan 5 11:39:28 ppp [opt6] IPADDR 10.148.221.143 Jan 5 11:39:28 ppp [opt6] IPCP: rec'd Configure Nak #3 (Ack-Sent) Jan 5 11:39:28 ppp [opt6] SECDNS 0.0.0.0 Jan 5 11:39:28 ppp [opt6] PRIDNS 0.0.0.0 Jan 5 11:39:28 ppp [opt6] IPADDR 0.0.0.0 Jan 5 11:39:28 ppp [opt6] IPCP: SendConfigReq #3 Jan 5 11:39:28 ppp [opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Jan 5 11:39:28 ppp [opt6] IPCP: rec'd Configure Reject #2 (Ack-Sent) Jan 5 11:39:28 ppp [opt6] IPV6CP: LayerFinish Jan 5 11:39:28 ppp [opt6] IPV6CP: state change Req-Sent --> Stopped Jan 5 11:39:28 ppp [opt6] IPV6CP: protocol was rejected by peer Jan 5 11:39:28 ppp [opt6_link0] LCP: protocol IPV6CP was rejected Jan 5 11:39:28 ppp [opt6_link0] LCP: rec'd Protocol Reject #2 (Opened) Jan 5 11:39:28 ppp [opt6] SECDNS 0.0.0.0 Jan 5 11:39:28 ppp [opt6] PRIDNS 0.0.0.0 Jan 5 11:39:28 ppp [opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Jan 5 11:39:28 ppp [opt6] IPADDR 0.0.0.0 Jan 5 11:39:28 ppp [opt6] IPCP: SendConfigReq #2 Jan 5 11:39:28 ppp [opt6] IPCP: rec'd Configure Nak #1 (Ack-Sent) Jan 5 11:39:28 ppp [opt6] IPCP: state change Req-Sent --> Ack-Sent Jan 5 11:39:28 ppp [opt6] IPCP: SendConfigAck #1 Jan 5 11:39:28 ppp [opt6] IPCP: rec'd Configure Request #1 (Req-Sent) Jan 5 11:39:28 ppp [opt6] IPV6CP: SendConfigReq #1 Jan 5 11:39:28 ppp [opt6] IPV6CP: state change Starting --> Req-Sent Jan 5 11:39:28 ppp [opt6] IPV6CP: Up event Jan 5 11:39:28 ppp [opt6] SECDNS 0.0.0.0 Jan 5 11:39:28 ppp [opt6] PRIDNS 0.0.0.0 Jan 5 11:39:28 ppp [opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Jan 5 11:39:28 ppp [opt6] IPADDR 0.0.0.0 Jan 5 11:39:28 ppp [opt6] IPCP: SendConfigReq #1 Jan 5 11:39:28 ppp [opt6] IPCP: state change Starting --> Req-Sent Jan 5 11:39:28 ppp [opt6] IPCP: Up event Jan 5 11:39:28 ppp [opt6] IPV6CP: LayerStart Jan 5 11:39:28 ppp [opt6] IPV6CP: state change Initial --> Starting Jan 5 11:39:28 ppp [opt6] IPV6CP: Open event Jan 5 11:39:28 ppp [opt6] IPCP: LayerStart Jan 5 11:39:28 ppp [opt6] IPCP: state change Initial --> Starting Jan 5 11:39:28 ppp [opt6] IPCP: Open event Jan 5 11:39:28 ppp [opt6] Bundle: Status update: up 1 link, total bandwidth 150000000 bps Jan 5 11:39:28 ppp [opt6_link0] Link: Join bundle "opt6" Jan 5 11:39:28 ppp [opt6_link0] Link: Matched action 'bundle "opt6" ""' Jan 5 11:39:28 ppp [opt6_link0] LCP: authorization successful Jan 5 11:39:28 ppp [opt6_link0] MESG: Welcome!! Jan 5 11:39:28 ppp [opt6_link0] CHAP: rec'd SUCCESS #1 len: 13 Jan 5 11:39:28 ppp [opt6_link0] CHAP: sending RESPONSE #1 len: 25 Jan 5 11:39:28 ppp [opt6_link0] CHAP: Using authname "user" Jan 5 11:39:28 ppp [opt6_link0] Name: "HUAWEI_CHAP_SRVR" Jan 5 11:39:28 ppp [opt6_link0] CHAP: rec'd CHALLENGE #1 len: 37 Jan 5 11:39:28 ppp [opt6_link0] LCP: LayerUp Jan 5 11:39:28 ppp [opt6_link0] LCP: auth: peer wants CHAP, I want nothing Jan 5 11:39:28 ppp [opt6_link0] LCP: state change Ack-Sent --> Opened Jan 5 11:39:28 ppp [opt6_link0] MAGICNUM 0x6d53d722 Jan 5 11:39:28 ppp [opt6_link0] MRU 1500 Jan 5 11:39:28 ppp [opt6_link0] ACCMAP 0x000a0000 Jan 5 11:39:28 ppp [opt6_link0] PROTOCOMP Jan 5 11:39:28 ppp [opt6_link0] ACFCOMP Jan 5 11:39:28 ppp [opt6_link0] LCP: rec'd Configure Ack #1 (Ack-Sent) Jan 5 11:39:28 ppp [opt6_link0] LCP: state change Req-Sent --> Ack-Sent Jan 5 11:39:28 ppp [opt6_link0] AUTHPROTO CHAP MD5 Jan 5 11:39:28 ppp [opt6_link0] MAGICNUM 0x00000543 Jan 5 11:39:28 ppp [opt6_link0] MRU 1500 Jan 5 11:39:28 ppp [opt6_link0] ACCMAP 0x00000000 Jan 5 11:39:28 ppp [opt6_link0] PROTOCOMP Jan 5 11:39:28 ppp [opt6_link0] ACFCOMP Jan 5 11:39:28 ppp [opt6_link0] LCP: SendConfigAck #1 Jan 5 11:39:28 ppp [opt6_link0] AUTHPROTO CHAP MD5 Jan 5 11:39:28 ppp [opt6_link0] MAGICNUM 0x00000543 Jan 5 11:39:28 ppp [opt6_link0] MRU 1500 Jan 5 11:39:28 ppp [opt6_link0] ACCMAP 0x00000000 Jan 5 11:39:28 ppp [opt6_link0] PROTOCOMP Jan 5 11:39:28 ppp [opt6_link0] ACFCOMP Jan 5 11:39:28 ppp [opt6_link0] LCP: rec'd Configure Request #1 (Req-Sent) Jan 5 11:39:28 ppp [opt6_link0] MAGICNUM 0x6d53d722 Jan 5 11:39:28 ppp [opt6_link0] MRU 1500 Jan 5 11:39:28 ppp [opt6_link0] ACCMAP 0x000a0000 Jan 5 11:39:28 ppp [opt6_link0] PROTOCOMP Jan 5 11:39:28 ppp [opt6_link0] ACFCOMP Jan 5 11:39:28 ppp [opt6_link0] LCP: SendConfigReq #1 Jan 5 11:39:28 ppp [opt6_link0] LCP: state change Starting --> Req-Sent Jan 5 11:39:28 ppp [opt6_link0] LCP: Up event Jan 5 11:39:28 ppp [opt6_link0] Link: UP event Jan 5 11:39:28 ppp [opt6_link0] MODEM: chat script succeeded Jan 5 11:39:28 ppp [opt6_link0] CHAT: Connected at 150000000. Jan 5 11:39:28 ppp [opt6_link0] CHAT: ATDT*99# Jan 5 11:39:28 ppp [opt6_link0] CHAT: Dialing server at *99#... Jan 5 11:39:28 ppp [opt6_link0] CHAT: Detected Custom modem. Jan 5 11:39:27 ppp [opt6_link0] LCP: LayerStart Jan 5 11:39:27 ppp [opt6_link0] LCP: state change Initial --> Starting Jan 5 11:39:27 ppp [opt6_link0] LCP: Open event Jan 5 11:39:27 ppp [opt6_link0] Link: OPEN event Jan 5 11:39:27 ppp [opt6] Bundle: Interface ng0 created Jan 5 11:39:27 ppp web: web is not running Jan 5 11:39:27 ppp process 45586 started, version 5.8 (root@pfSense_v2_3_2_amd64-pfSense_v2_3_2-job-04 16:03 19-Jul-2016) ``` Stay tuned ;) -
Hello, I have a ME909s-120 and a APU2C4 however I only have two devices listed:
When I try with the /dev/cuau0 it shows:
Mar 7 01:52:40 ppp [opt5_link0] can't open /dev/cuau0: Device busy
Mar 7 01:52:40 ppp [opt5_link0] MODEM: Fail to open serial port /dev/cuau0 on speed 115200
Mar 7 01:52:40 ppp [opt5_link0] Link: DOWN event
Mar 7 01:52:40 ppp [opt5_link0] LCP: Down event
Mar 7 01:52:40 ppp [opt5_link0] Link: reconnection attempt 12 in 4 secondsWhen I try with the /dev/cuau1 it shows:
Mar 7 01:54:00 ppp Multi-link PPP daemon for FreeBSD
Mar 7 01:54:00 ppp process 92444 started, version 5.8 (root@pfSense_v2_3_2_amd64-pfSense_v2_3_2-job-04 16:03 19-Jul-2016)
Mar 7 01:54:00 ppp waiting for process 93269 to die…
Mar 7 01:54:00 ppp caught fatal signal TERM
Mar 7 01:54:00 ppp [opt5] IFACE: Close event
Mar 7 01:54:00 ppp [opt5] IPCP: Close event
Mar 7 01:54:00 ppp [opt5] IPV6CP: Close event
Mar 7 01:54:01 ppp waiting for process 93269 to die…
Mar 7 01:54:01 ppp [opt5_link0] LCP: Close event
Mar 7 01:54:01 ppp [opt5_link0] LCP: state change Starting –> Initial
Mar 7 01:54:01 ppp [opt5_link0] LCP: LayerFinish
Mar 7 01:54:02 ppp [opt5] Bundle: Shutdown
Mar 7 01:54:02 ppp [opt5_link0] Link: Shutdown
Mar 7 01:54:02 ppp process 93269 terminated
Mar 7 01:54:02 ppp web: web is not running
Mar 7 01:54:02 ppp [opt5] Bundle: Interface ng0 created
Mar 7 01:54:02 ppp [opt5_link0] Link: OPEN event
Mar 7 01:54:02 ppp [opt5_link0] LCP: Open event
Mar 7 01:54:02 ppp [opt5_link0] LCP: state change Initial –> Starting
Mar 7 01:54:02 ppp [opt5_link0] LCP: LayerStart
Mar 7 01:54:16 ppp [opt5_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Mar 7 01:54:16 ppp [opt5_link0] MODEM: chat script failed
Mar 7 01:54:16 ppp [opt5_link0] Link: DOWN event
Mar 7 01:54:16 ppp [opt5_link0] LCP: Down event
Mar 7 01:54:16 ppp [opt5_link0] Link: reconnection attempt 1 in 4 seconds
Mar 7 01:54:20 ppp [opt5_link0] Link: reconnection attempt 1I have the Huawei ME909s-120 on J13 with SIM on Slot 1.
I have tried the command :
cu -l /dev/cuau0
/dev/cuau0: Device busy
link downcu -l /dev/cuau1
Stale lock on cuau1 PID=92444… overriding.
ConnectedIt stucks, I can't type anything
-
Hi mitra7,
you have to put the ME909s-120 Card to the mimiPCIe Slot 2. Read the manuel at page 8 https://pcengines.ch/pdf/apu2.pdf
cuau0 and cuau1 are only for USB devices.
change the card to slot 2 and reboot the pfsense. After reboot check if ME909s-120 is detected ant the web Interface
Interfaces > assign > ppp
in my case there are 4 other devices, cuau0.0, cuau0.1, cuau0.2,cuau0.3 and cuau0.4
add a ppp connection with the information of your ISP and check.
-
http://i.imgur.com/cAvELxL.jpg
http://i.imgur.com/J9y6XwM.jpg
http://i.imgur.com/upeKjdV.jpgThe Mini-PCI Card is detected as the following shows:
usbconfig dump_device_descugen1.3: <huawei mobile="" v7r11="" huawei="" technologies="" co.,="" ltd.="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0210
bDeviceClass = 0x0000 <probed by="" interface="" class="">bDeviceSubClass = 0x0000
bDeviceProtocol = 0x00ff
bMaxPacketSize0 = 0x0040
idVendor = 0x12d1
idProduct = 0x15c1
bcdDevice = 0x0102
iManufacturer = 0x0001 <huawei technologies="" co.,="" ltd.="">iProduct = 0x0002 <huawei mobile="" v7r11="">iSerialNumber = 0x0003 <0123456789ABCDEF>
bNumConfigurations = 0x0003</huawei></huawei></probed></huawei>However no new devices are created on /dev
I don't understand… -
i checked my box and got the same result
the ME909s-120 is installed at usbus1.
Without the card i got also only cuau0 and cuau1, beyond i installed the ME909s-120 there are appeared cuau0.0 - cuau0.4 as Link Interfaces.
but it's only able to connect with cu -l to cuaU0.0 and cuaU0.4 and only with cuaU0.0 it's possible to connect. -
Which version of Pfsense do you have?
I have the nanobsd amd642.3.2-RELEASE-p1 (amd64)
built on Tue Sep 27 12:13:07 CDT 2016
FreeBSD 10.3-RELEASE-p5 -
the current Version
pfSense-memstick-2.3.2-RELEASE
AMD64 USB Memstick Intaller
2.3.2-RELEASE-p1 (amd64)
built on Tue Sep 27 12:13:07 CDT 2016
FreeBSD 10.3-RELEASE-p9 -
I'll try to change mine to match yours or to a more recent one.
-
I'll try to change mine to match yours or to a more recent one.
I'll try to find the right AT command 's for the ME909s-120 ;)
-
Update
Verbindung zum Internet bekomme ich über /dev/cuaU0.0, dafür benötige ich lediglich den Befehl &F um dem Modem über den Init string zu sagen das es auf default gesetzt ist.
IP bekomme ich zugewiesen und kann auch über das Gateway ins Internet. Habe laut pfSense etwa 150MB über die LTE Leitung gejagt. Beim Speedtest ist mir aufgefallen das ein Ping auf meine IP nicht moglich ist.
Und bei meinem Provider WinSim wird zumindest bisher der Traffic auch nicht mitgezählt, was sehr ungewöhnlich ist.Weiterhin bekomme ich das 4G_WAN als Offline angezeigt, was offensichtlich damit zu tun hat das kein Ping durch geht. Den Ping den die pfSense absetzt um zu sehen ob die Leitung online ist verschwindet im Nirvana und kommt nicht zurück.
Wenn jemand eine Idee dazu hat…...... Liebend gerne ;)
I got a connection to the internet with the device /dev/cuau0.0 and i just need the AT code &F to setup the Modem to default. I got an IP address and it's possible to connect to the internet. i made a speedtest and loaded round about 150MB wit the G4_WAN, but there's one mysterious thing, it's not possible to ping my WAN address an i guess ist's also the reasen why the 4G_WAN is shown offline on the dashboard of the pfsense.
i've no idea what i've to do now, if anywhere has an idea ....... your welcome ;)
-
I've updated my PFSense and now I have the FreeBSD 10.3-RELEASE-p9. Now it displays the devices!
-
Now I have Internet connection too!
I've checked and in the Gateway Monitoring the WAN shows Down also. I belive that's because my and your ISP blocks ICMP or TCP/UDP in their internal network.
Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem. -
….....
Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.Thank you, let's try it with a Monitor IP.
-
I got it… temporary
I used the the IP Address who print out in the System Log
[opt6] IPADDR xx.xx.xx.xx
But i guess the IP will change after the next reconnect, i will try it.
-
Every time i connect the 4G_WAN to net i got a IPADDR, but everyone change it every time to the same IP Address
an 6 09:41:27 ppp [opt6] xx.xx.83.56 -> 10.64.64.0 Jan 6 09:41:27 ppp [opt6] IPCP: LayerUp Jan 6 09:41:27 ppp [opt6] IPCP: state change Ack-Sent --> Opened Jan 6 09:41:27 ppp [opt6] SECDNS xx.xx.121.18 Jan 6 09:41:27 ppp [opt6] PRIDNS xx.xx.121.17 Jan 6 09:41:27 ppp [opt6] IPADDR xx.xx.83.56I checked the IPADDR and its possible to connected from outsite with TCP and UDP. Why does the IP change ervery time to the static one.
I will try to check the default modem settings.
-
Update …..
The IP 10.64.64.0 is set as default if the ISP offers no Gateway IP, i found some information about the mystic IP
here some links about it
https://redmine.pfsense.org/issues/5273
https://redmine.pfsense.org/issues/919Now the question, is it possible to teach the Modem to asking about the Gateway IP?
I can't find anything about the Gateway IP in the manual of the ME909S-120 modem.
Edit:
Another issue is if you use a limited plan the monitor check need round about 2 MiB per day to check the online status…..